[U-Boot] u-boot 2010 - devkit8000 issue

[JaimeR]

Hello 

I have a clone of beagleboard (devkit8000) I update the u-boot from 2009-11
to 2010 version. I use a set of scripts to boot based on autoboot method.
The thing is, now I can not boot and hangs at kernel loading. I've tested
several kernels provided by manufacturer, linux-omap-2.6, some other from
git:/gitorious/devkit8000 and all of them end like:

## Booting kernel from Legacy Image at 82000000 ...
...
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

hangs here

and some others

   Verifying Checksum ... OK
   Loading Kernel Image ...

hangs here.

these are my u-boot environment variables. Some of you can give a clue ? I
ve tested almost everything.

bootdelay=3                            
baudrate=115200                        
loadaddr=0x82000000                    
console=ttyS2,115200n8                 
vram=12M                               
dvimode=1024x768MR-16 at 60               
defaultdisplay=dvi                     
nfsopts=hard,tcp,rsize=65536,wsize=65536
commonargs=setenv bootargs console=${console} vram=${vram}
omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay}
mmcargs=run commonargs; setenv bootargs ${bootargs} root=/dev/mmcblk0p2
${kernelopts}                                   
nandargs=run commonargs; setenv bootargs ${bootargs}
omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay}
root=/dev/mtdblock4 rootfstype=jffs2 ${kernel}
netargs=run commonargs; setenv bootargs ${bootargs} root=/dev/nfs
nfsroot=${serverip}:${rootpath},${nfsopts}
ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${}
loadbootscript=fatload mmc 0 ${loadaddr} boot.scr                                                                                                                
bootscript=echo Running bootscript from mmc ...; source ${loadaddr}                                                                                              
loaduimage=fatload mmc 0 ${loadaddr} uImage                                                                                                                      
eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000                                                                                               
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}                                                                                                
nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr}
280000 400000; bootm ${loadaddr}                                                        
netboot=echo Booting from network ...; dhcp ${loadaddr}; run netargs; bootm
${loadaddr}                                                                          
autoboot=if mmc init 0; then if run loadbootscript; then run bootscript;
else if run loaduimage; then run mmcboot; else run nandboot; fi; fi; else
run nandboot;i
ethaddr=02:fa:19:01:f0:1e                                                                                                                                        
dieid#=6db2000400000000040365fa1901f01e                                                                                                                          
ethact=dm9000                                                                                                                                                    
bootargs=console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw rootwait                                                                                     
bootargs_back=console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw
rootwait                                                                                
bootcmd=mmc init;fatload mmc1 0 0x82000000 uImage.bin;bootm 0x82000000                                                                                           
stdin=serial                                                                                                                                                     
stdout=serial                                                                                                                                                    
stderr=serial                                                                                                                                                    
kernelopts=rw           
-- 
View this message in context: http://old.nabble.com/u-boot-2010---devkit8000-issue-tp28866288p28866288.html
Sent from the Uboot - Users mailing list archive at Nabble.com.