[U-Boot] u-boot 2010 - devkit8000 issue

[Thomas Weber]

Hello,

the u-boot and the linux-kernel from the TimLL cd are patched with an
unofficial machine identifier. They are not working with any other of
your sources. You need to update both, u-boot and linux-kernel.  Can
you write me, which u-boot and linux-kernel version you are using?

Thomas

On Sat, Jun 12, 2010 at 7:30 PM, JaimeR <jaime.rebolledo at gmail.com> wrote:
>
> Hello
>
> I have a clone of beagleboard (devkit8000) I update the u-boot from 2009-11
> to 2010 version. I use a set of scripts to boot based on autoboot method.
> The thing is, now I can not boot and hangs at kernel loading. I've tested
> several kernels provided by manufacturer, linux-omap-2.6, some other from
> git:/gitorious/devkit8000 and all of them end like:
>
> ## Booting kernel from Legacy Image at 82000000 ...
> ...
>   Verifying Checksum ... OK
>   Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> hangs here
>
> and some others
>
>   Verifying Checksum ... OK
>   Loading Kernel Image ...
>
> hangs here.
>
> these are my u-boot environment variables. Some of you can give a clue ? I
> ve tested almost everything.
>
> bootdelay=3
> baudrate=115200
> loadaddr=0x82000000
> console=ttyS2,115200n8
> vram=12M
> dvimode=1024x768MR-16 at 60
> defaultdisplay=dvi
> nfsopts=hard,tcp,rsize=65536,wsize=65536
> commonargs=setenv bootargs console=${console} vram=${vram}
> omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay}
> mmcargs=run commonargs; setenv bootargs ${bootargs} root=/dev/mmcblk0p2
> ${kernelopts}
> nandargs=run commonargs; setenv bootargs ${bootargs}
> omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay}
> root=/dev/mtdblock4 rootfstype=jffs2 ${kernel}
> netargs=run commonargs; setenv bootargs ${bootargs} root=/dev/nfs
> nfsroot=${serverip}:${rootpath},${nfsopts}
> ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${}
> loadbootscript=fatload mmc 0 ${loadaddr} boot.scr
> bootscript=echo Running bootscript from mmc ...; source ${loadaddr}
> loaduimage=fatload mmc 0 ${loadaddr} uImage
> eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000
> mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
> nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr}
> 280000 400000; bootm ${loadaddr}
> netboot=echo Booting from network ...; dhcp ${loadaddr}; run netargs; bootm
> ${loadaddr}
> autoboot=if mmc init 0; then if run loadbootscript; then run bootscript;
> else if run loaduimage; then run mmcboot; else run nandboot; fi; fi; else
> run nandboot;i
> ethaddr=02:fa:19:01:f0:1e
> dieid#=6db2000400000000040365fa1901f01e
> ethact=dm9000
> bootargs=console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw rootwait
> bootargs_back=console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw
> rootwait
> bootcmd=mmc init;fatload mmc1 0 0x82000000 uImage.bin;bootm 0x82000000
> stdin=serial
> stdout=serial
> stderr=serial
> kernelopts=rw
> --
> View this message in context: http://old.nabble.com/u-boot-2010---devkit8000-issue-tp28866288p28866288.html
> Sent from the Uboot - Users mailing list archive at Nabble.com.
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>