[U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale

[Ilya Yanok]

Hi Kim,

On 24.06.2010 22:00, Kim Phillips wrote:
>> I've enabled icache and now the board sometimes resets twice after
>> U-Boot 'reset' command:
>>      
>    
>> (It doesn't always stop at "DRAM:" line but that position is most frequent)
>> Maybe you have some ideas on this subject?
>>      
> hmm, if it's only on soft-resets, can you try adding
> HID0_ENABLE_INSTRUCTION_CACHE to CONFIG_SYS_HID0_INIT in addition to
> _FINAL?  Some cache state is preserved over a soft-reset...
>    

Thanks for your advice but this doesn't help...

Regards, Ilya.