[U-Boot] Hi guys, maybe this is not the best list but I ask about my problem

[Fabio Giovagnini]

I'm developing a custom board (designed by me) based on sh2a 7203 (Renesas).
I have some troubles with my SST flash, while I'm sure my eth0 card works.
For building my rootfs I use a script
Im able to mount the nfsroot filesystem but I get this message:
IP-Config: Complete:
      device=eth0, addr=192.168.1.3, mask=255.255.255.0, gw=192.168.1.254,
     host=uclinux, domain=, nis-domain=(none),
     bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath=
Looking up port of RPC 100003/3 on 192.168.1.2
Looking up port of RPC 100005/3 on 192.168.1.2
do_mount_root,270 - debug 1
/dev/root,0x0c1a58a0,0x00008000,0x0c24659c
do_mount_root,273 - debug 2
do_mount_root,277 - debug 3
do_mount_root,279 - debug 4
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 88k freed
Warning: unable to open an initial console.
Kernel panic - not syncing: No init found.  Try passing init= option to 
kernel.

In rootpath I should read someting?
Could the problem be my PC is little endian and I' exporting to a big endian 
CPU?

Thanks in advance.




-- 
Fabio Giovagnini

Aurion s.r.l.
P.I e C.F.
00885711200
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919