[U-Boot] uboot on microblaze, compilation error

[Mike Frysinger]

On Thursday 18 March 2010 05:29:19 Michal Simek wrote:
> Mike Frysinger wrote:
> > On Wednesday 17 March 2010 14:36:38 Horst Gall wrote:
> >> I try to compile an actual version of u-boot for xilinx microblaze.
> >> 
> >> The linker ends with the error-message:
> >>     ... mb-ld.real:u-boot.lds:1: parse error
> >> 
> >> In u-boot main-directory I found the file 'u-boot.lds':
> >>     OUTPUT_ARCH(1)
> >>     ENTRY(_start)
> >>     ...
> >>     cpu/1/start.o (.text)
> >>     ...
> >> 
> >> When I change the "1" to "microblaze" it works:
> >>     OUTPUT_ARCH(microblaze)
> >>     ENTRY(_start)
> >>     ...
> >>     cpu/microblaze/start.o (.text)
> >>     ...
> >> 
> >> After "make ...config" my modification is overwritten.
> >> How can I fix this problem?
> > 
> > add "#undef microblaze" to the top of board/xilinx/microblaze-generic/u-
> > boot.lds
> 
> Mike is right. I expect you are using toolchain from EDK where the
> problem is. Linux toolchain are ok.

i dont think the toolchain is broken.  this is standard gcc behavior for all 
arches.  i would check the microblaze gcc port, but it doesnt seem to be 
mainlined at gcc.gnu.org, so ive lost interest.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100318/1faf3d82/attachment.pgp