[U-Boot] [PATCH 1/2 v2] net, fec_mxc: only setup the device enetaddr with eeprom value, if ethaddr is not setup

[Wolfgang Denk]

Dear Heiko Schocher,

In message <4BB238E9.7060609 at denx.de> you wrote:
> if ethaddr is not setup in the environment, fill the device
> enetaddr with the contents of the eeprom, and only
> the device enetaddr, not the mac address registers!
> 
> Tested on the magnesium board.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> ---
> - changes since v1 posted here:
>   http://lists.denx.de/pipermail/u-boot/2010-March/069192.html
> 
>   - splitted in two patches as Wolfgang suggested

Thanks.  Note that it would also have been an excellent idea to put
the responsible custodian on Cc:


>  drivers/net/fec_mxc.c |    9 +++++----
>  1 files changed, 5 insertions(+), 4 deletions(-)

Applied, thanks.


Ben, this is (as far as I see it) an undisputed bug fix, so I'm
pulling this patch (and only this one from this series of 4)
directly. Hope this is ok with you.



Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Our management frequently gets lost in thought.   That's because it's
unfamiliar territory.