[U-Boot] [PATCH 1/2 v2] net, fec_mxc: only setup the device enetaddr with eeprom value, if ethaddr is not setup

[Ben Warren]

Hi Wolfgang,

On 3/30/2010 1:34 PM, Wolfgang Denk wrote:
> Dear Heiko Schocher,
>
> In message<4BB238E9.7060609 at denx.de>  you wrote:
>    
>> if ethaddr is not setup in the environment, fill the device
>> enetaddr with the contents of the eeprom, and only
>> the device enetaddr, not the mac address registers!
>>
>> Tested on the magnesium board.
>>
>> Signed-off-by: Heiko Schocher<hs at denx.de>
>> ---
>> - changes since v1 posted here:
>>    http://lists.denx.de/pipermail/u-boot/2010-March/069192.html
>>
>>    - splitted in two patches as Wolfgang suggested
>>      
> Thanks.  Note that it would also have been an excellent idea to put
> the responsible custodian on Cc:
>
>
>    
>>   drivers/net/fec_mxc.c |    9 +++++----
>>   1 files changed, 5 insertions(+), 4 deletions(-)
>>      
> Applied, thanks.
>
>
> Ben, this is (as far as I see it) an undisputed bug fix, so I'm
> pulling this patch (and only this one from this series of 4)
> directly. Hope this is ok with you.
>
>    
Sorry for not wading into this conversation earlier.  I have issues with 
this driver, in particular that it isn't truly a 'MULTI' driver.  This 
came to my attention when I noticed that Heiko's changes reference the 
'ethaddr' environment variable.  Hopefully somebody will fix it properly.

In any case, as you say, this fixes a real bug and doesn't make things 
worse.  Good enough, I guess.
>
> Best regards,
>
> Wolfgang Denk
>
>    
thanks,
Ben