[U-Boot] Help me on finding board similar to NIC card in U-bootloader

[Wolfgang Denk]

Dear Hari Babu,

In message <q2re05b45b91005052125p8b8538eehd8d07687081ad793 at mail.gmail.com> you wrote:
> 
>  I am having a new NIC card and i have to develop U-boot Loader for that.Can
> any one help me which board name in U-Boot source code having similar kind
> of features( PHY, MAC ) for cloning that to my new NIC target card.This NIC
> card is communicating through PCIe to host,my NIC card is having the
> following H/W details.
> 
> 1.CN63xx processor(Cavium network)
> 2.NAND Flash device  : MT29F16G08ABABA
> 3.NOR Flash device   :  JS28F320J3D75
> 4.EEPROM   : AT24C256B, AT25F1024
> 5.PSRAM : MT45W1MW16PD
> 6.DDR3SDRAM :MT41J128M16
> 7.*BCM8727* dual 10 GbE SFI-to-XAUI PHY
> 
> I think U-bootloader dont have Cavium support processors.so can u consider
> other H/W details for finding board name. Thank u.

Cavium has ported U-Boot to their boards, but never contributed any of
their work back into the mainline tree. It is probably most efficient
to get the source code for their ports and use this as a base. Since
you use Cavium processors, it should be no problem for you to get
their sources.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
When a man sits with a pretty girl for  an  hour,  it  seems  like  a
minute.  But let him sit on a hot stove for a minute -- and it's lon-
ger than any hour. That's relativity.              -- Albert Einstein