[U-Boot] [RFC] arm926ejs: fix jump to RAM nand_boot

[Albert ARIBAUD]

Le 01/11/2010 06:13, sughosh ganu a écrit :
> On Mon, Nov 1, 2010 at 4:34 AM, Albert ARIBAUD<albert.aribaud at free.fr>wrote:
>
>> Le 31/10/2010 23:28, Alexander Holler a écrit :
>>> On 31.10.2010 22:20, Albert Aribaud wrote:
>>>
>>>> Alexander, Darius, others who already tested the previous RFC patch,
>>>> please test for non-regression.
>>>
>>> Still works here with that patch applied. But that isn't remarkable,
>> because
>>>
>>>>     #ifdef CONFIG_NAND_SPL
>>>
>>> that isn't defined here. ;)
>>
>> ... and tx25 seems not to have it defined either, so my change should
>> not have affected Wolfgang's tests. :/
>>
>
>   I think it is defined in nand_spl/board/karo/tx25/Makefile. We do get a
> nand_spl/u-boot-spl when we compile for the tx25 board, which has a
> reference to nand_boot.

Thanks Sugish. Which commands do you use to build the tx25? I tried

	make distclean; make tx25_config; make

and

	./MAKEALL tx25

... but this ends up with the code in start.S as if NAND_SPL was not 
defined, i.e. calling board_inir_r, not nand_boot.

> -sughosh

Amicalement,
-- 
Albert.