[U-Boot] [RFCv2 0/3] Add support for quick boot

[Premi, Sanjeev]

> -----Original Message-----
> From: Premi, Sanjeev 
> Sent: Friday, October 29, 2010 9:35 PM
> To: u-boot at lists.denx.de
> Cc: Premi, Sanjeev
> Subject: [RFCv2 0/3] Add support for quick boot
> 
> This series attempts to address specific feedback[1] from
> Wolfgang Denk to my previous submission.
> 
> Since this series is based on u-boot master, it is missing
> these patches for successful build:
>  a) omap3evm: Support relocation
>     http://marc.info/?l=u-boot&m=128748423503307&w=2
>  b) omap3evm: Move function to identify board revision
>     http://marc.info/?l=u-boot&m=128749414618147&w=2
>  c) omap3evm: Fix mechanism to identify board revision
>     http://marc.info/?l=u-boot&m=128757192518074&w=2
> 
> I am hoping this series illustrates exact changes done.
> However, my choice of filenames results in rather long
> config names for two new configurations. I plan to
> replace "quick" with simple "q". Does it sound ok?
> 
> References:
>   [1] http://marc.info/?l=u-boot&m=128828487429161&w=2
>   [2] http://marc.info/?l=u-boot&m=128818733126234&w=2
>   [3] http://marc.info/?l=u-boot&m=128818664024766&w=2
> 
> Patch (a) is required for successful build for current configuration.
> Patches (b) and (c) were required for successful build of "quick"
> configurations. I am yet to test these on this patchset. Will do
> before final submission.
> 
> Sanjeev Premi (3):
>   omap3evm: Reorder related config options
>   omap3evm: move common config options to new file
>   omap3evm: Add quick boot configurations
> 

Hi Wolfgang,

Did you get chance to look at this series?

~sanjeev