[U-Boot] NAND on eLBC

[Andre Schwarz]

Scott,

looks like I made a mistake on current MPC8377 NAND wiring.

Nand-Flash "write enable" is wired to LFWE1 ... I connected each WE to 
its corresponding CS, i.e. :

- CS0/WE0 -> Nor Flash
- CS1/WE1 -> Nand Flash
- CS2/WE2 -> MRAM

Am I assuming right that FCM can only use WE0 ?

Do you see any issue with connecting all devices to WE0 since they have 
distinct chip selects ?


Regards,
André

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner