[U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add xM rev B to ID table

[Premi, Sanjeev]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Steve Sakoman
> Sent: Saturday, November 06, 2010 8:35 AM
> To: Nishanth Menon
> Cc: u-boot at lists.denx.de; Koen Kooi
> Subject: Re: [U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add 
> xM rev B to ID table
> 
[snip]

> Note that for 36xx my patch sets the max to 720 -- this is because
> mainline/linux-omap currently does not support 1000.  We can adjust
> that when kernel support for 1000 appears.

[sp] 720MHz is not a valid frequency for 36x. It is the highest freq
     for OMAP35x - subject to associated bit set in the silicon.
     600MHz would be be safe for all OMAP35x family processors.

     For 36xx, the freq should be 800MHz (if you don't want 1GHz).

[snip]