[U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add xM rev B to ID table

[Nishanth Menon]

Premi, Sanjeev wrote, on 11/07/2010 03:16 AM:
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de
>> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Steve Sakoman
>> Sent: Saturday, November 06, 2010 8:35 AM
>> To: Nishanth Menon
>> Cc: u-boot at lists.denx.de; Koen Kooi
>> Subject: Re: [U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add
>> xM rev B to ID table
>>
> [snip]
>
>> Note that for 36xx my patch sets the max to 720 -- this is because
>> mainline/linux-omap currently does not support 1000.  We can adjust
>> that when kernel support for 1000 appears.
>
> [sp] 720MHz is not a valid frequency for 36x. It is the highest freq
>       for OMAP35x - subject to associated bit set in the silicon.
>       600MHz would be be safe for all OMAP35x family processors.
>
>       For 36xx, the freq should be 800MHz (if you don't want 1GHz).

yep, Good catch :) , 720 is not valid either 800/1GHz :(

-- 
Regards,
Nishanth Menon