[U-Boot] [PATCH][v0]p1_p2_rdb: to set SQW/INT pin of RTC as INT line

[Kumar Gala]

On Oct 25, 2010, at 4:22 AM, Priyanka Jain wrote:

> p1_p2_rdb : SQW/INT pin in RTC can be used for 
> generating square wave(by default) or as interrupt line.
> U-boot is registering this pin for interrupts. 
> Configuring SQW/INT bit as interrupt line during board initialization 
> to avoid spurious interrupts generated by square wave.
> 
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> ---
> board/freescale/p1_p2_rdb/p1_p2_rdb.c |    1 +
> include/configs/P1_P2_RDB.h           |    1 +
> 2 files changed, 2 insertions(+), 0 deletions(-)

applied to 85xx

- k