[U-Boot] [PATCH] AM3517:Fix for ARM Relocation support
hvaibhav at ti.com
hvaibhav at ti.com
Mon Nov 29 17:21:55 CET 2010
From: Vaibhav Hiremath <hvaibhav at ti.com>
Also change the CONFIG_SYS_TEXT_BASE to 0x80008000, required
with relocation support. This is the load address for primary
boot loader (x-loader).
Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
---
board/logicpd/am3517evm/config.mk | 2 +-
include/configs/am3517_evm.h | 6 ++++++
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/board/logicpd/am3517evm/config.mk b/board/logicpd/am3517evm/config.mk
index 102d32b..71ec5d0 100644
--- a/board/logicpd/am3517evm/config.mk
+++ b/board/logicpd/am3517evm/config.mk
@@ -27,4 +27,4 @@
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 9a9ba88..3dda1e9 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -330,4 +330,10 @@ extern unsigned int boot_flash_sec;
extern unsigned int boot_flash_type;
#endif
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
--
1.6.2.4
More information about the U-Boot
mailing list