[U-Boot] denx/master is not building for OMAP3 platforms except Beagle

Albert ARIBAUD albert.aribaud at free.fr
Sun Oct 3 13:06:33 CEST 2010


Le 03/10/2010 12:50, Hiremath, Vaibhav a écrit :
> Hi All,
>
> I think the current denx/matser is broken and is not building up for OMAP3 platforms except Beagle board.
>
> The error message on build is -
>
> board.c: In function '__dram_init_banksize':
> board.c:468: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
> board.c:468: error: (Each undeclared identifier is reported only once
> board.c:468: error: for each function it appears in.)
> board.c: In function 'board_init_f':
> board.c:514: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this function)
> board.c:547: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
> make[1]: *** [board.o] Error 1
> make[1]: Leaving directory `/home/devel/git-work/denx-uboot/arch/arm/lib'
> make: *** [arch/arm/lib/libarm.a] Error 2
>
>
> The root-cause is-
>
> +#undef CONFIG_SYS_ARM_WITHOUT_RELOC
> +#define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
>
>
> The above definition is missing in all (zoom1, zoom2, evm, am3517evm, sdp3430, overo, Pandora) config files.
>
> Am I missing something here? Just wanted to cross-check before posting patch to the list.

This is due to the introduction of relocation on ARM platforms -- see 
Wolfgang's recent release announcement.

Note that adding the definition may not be sufficient to get relocation 
working.

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list