[U-Boot] denx/master is not building for OMAP3 platforms except Beagle

[Hiremath, Vaibhav]

Hi All,

I think the current denx/matser is broken and is not building up for OMAP3 platforms except Beagle board.

The error message on build is - 

board.c: In function '__dram_init_banksize':
board.c:468: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
board.c:468: error: (Each undeclared identifier is reported only once
board.c:468: error: for each function it appears in.)
board.c: In function 'board_init_f':
board.c:514: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this function)
board.c:547: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
make[1]: *** [board.o] Error 1
make[1]: Leaving directory `/home/devel/git-work/denx-uboot/arch/arm/lib'
make: *** [arch/arm/lib/libarm.a] Error 2


The root-cause is-

+#undef CONFIG_SYS_ARM_WITHOUT_RELOC 
+#define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)


The above definition is missing in all (zoom1, zoom2, evm, am3517evm, sdp3430, overo, Pandora) config files.

Am I missing something here? Just wanted to cross-check before posting patch to the list.

Thanks,
Vaibhav