[U-Boot] Pull request: u-boot-arm

Wolfgang Denk wd at denx.de
Sun Oct 17 20:24:18 CEST 2010


The following changes since commit e1b4c57096b87b4ada56df4154d9acee6a59141f:

  Merge branch 'master' of git://git.denx.de/u-boot-arm (2010-10-13 20:59:47 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-arm.git master

Ben Gardiner (7):
      davinci_nand, trivial : use symbolic ECC start command
      da850evm : enable NAND even when not in NAND boot mode
      da850evm: setup the NAND flash timings
      da850evm: setup NAND support under CONFIG_USE_NAND
      da850evm: add mtdpart and ubi commands with NAND support
      da850evm: basic MII EMAC support
      da850evm: fix linux bootparam address

Enric Balletbo i Serra (3):
      OMAP3: SDRC: Introduce Numonyx DDR type
      OMAP3: Add support for the IGEP v2 board.
      OMAP3: Add support for the OMAP3 IGEP module.

Loic Minier (1):
      mx51evk: add u-boot.imx to ALL target

Stefano Babic (6):
      FPGA: add support for downloading Lattice bitstream
      MX31: Adding missing iomux pin to MX.31 registers
      MX31: Add support to update FPGA bitstream
      MX31: add support for setting pin pads
      MX31: Add support for MXC EHCI controller
      MX31: Add USB Host support to the QONG board

Steve Sakoman (8):
      env_mmc: Fix crashing bug encountered after enabling ARM relocation
      ARMV7: OMAP: Use default vendor/product ID for USB gadget
      ARMV7: OMAP4: Use generic mmc driver on Beagle
      ARMV7: OMAP4: Use generic mmc driver on Overo
      ARMV7: OMAP3: Implement relocation for Overo
      ARMV7: OMAP3: Enable cache support on Overo
      ARMV7: OMAP3: Fix bug in get_sdr_cs_offset()
      ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP

Sukumar Ghorai (5):
      MMC: Fix for capacity calculation on eMMC
      ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMC
      ARMV7: OMAP4: Use generic mmc driver on Panda
      ARMV7: OMAP4: Use generic mmc driver on SDP4430
      ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430

Wolfgang Denk (1):
      Merge branch 'master' of git://git.denx.de/u-boot-imx

 MAINTAINERS                                    |    5 +
 MAKEALL                                        |    2 +
 arch/arm/cpu/arm1136/mx31/generic.c            |   17 +
 arch/arm/cpu/armv7/omap3/sdrc.c                |    2 +-
 arch/arm/cpu/armv7/omap4/board.c               |    5 +
 arch/arm/include/asm/arch-mx31/mx31-regs.h     |  411 +++
 arch/arm/include/asm/arch-omap3/mem.h          |   43 +
 arch/arm/include/asm/arch-omap3/mmc_host_def.h |   10 +
 arch/arm/include/asm/arch-omap4/mmc_host_def.h |   10 +
 arch/arm/lib/board.c                           |   10 +-
 board/davedenx/qong/Makefile                   |    2 +-
 board/davedenx/qong/fpga.c                     |   95 +
 board/davedenx/qong/qong.c                     |   44 +
 board/davedenx/qong/qong_fpga.h                |    3 +-
 board/davinci/da8xxevm/da850evm.c              |   89 +
 board/freescale/mx51evk/config.mk              |    1 +
 board/isee/igep0020/Makefile                   |   49 +
 board/isee/igep0020/config.mk                  |   33 +
 board/isee/igep0020/igep0020.c                 |  129 +
 board/isee/igep0020/igep0020.h                 |  156 ++
 board/isee/igep0030/Makefile                   |   49 +
 board/isee/igep0030/config.mk                  |   34 +
 board/isee/igep0030/igep0030.c                 |   71 +
 board/isee/igep0030/igep0030.h                 |  147 ++
 board/overo/config.mk                          |    2 +-
 board/overo/overo.c                            |    9 +
 board/ti/beagle/beagle.c                       |    9 +
 board/ti/panda/config.mk                       |    4 +-
 board/ti/panda/panda.c                         |    9 +
 board/ti/sdp4430/config.mk                     |    3 +-
 board/ti/sdp4430/sdp.c                         |   10 +
 boards.cfg                                     |    2 +
 common/env_mmc.c                               |   17 +-
 drivers/fpga/Makefile                          |    1 +
 drivers/fpga/fpga.c                            |   11 +
 drivers/fpga/ivm_core.c                        | 3167 ++++++++++++++++++++++++
 drivers/fpga/lattice.c                         |  399 +++
 drivers/mmc/Makefile                           |    1 +
 drivers/mmc/mmc.c                              |   11 +
 drivers/mmc/omap_hsmmc.c                       |  415 ++++
 drivers/mtd/nand/davinci_nand.c                |    3 +-
 drivers/usb/host/Makefile                      |    1 +
 drivers/usb/host/ehci-mxc.c                    |  130 +
 drivers/video/mx3fb.c                          |   31 -
 include/configs/da850evm.h                     |   54 +-
 include/configs/igep0020.h                     |  228 ++
 include/configs/igep0030.h                     |  215 ++
 include/configs/omap3_beagle.h                 |   15 +-
 include/configs/omap3_overo.h                  |   14 +-
 include/configs/omap4_panda.h                  |   23 +-
 include/configs/omap4_sdp4430.h                |   35 +-
 include/configs/qong.h                         |   21 +-
 include/fpga.h                                 |    1 +
 include/lattice.h                              |  319 +++
 54 files changed, 6472 insertions(+), 105 deletions(-)
 create mode 100644 board/davedenx/qong/fpga.c
 create mode 100644 board/isee/igep0020/Makefile
 create mode 100644 board/isee/igep0020/config.mk
 create mode 100644 board/isee/igep0020/igep0020.c
 create mode 100644 board/isee/igep0020/igep0020.h
 create mode 100644 board/isee/igep0030/Makefile
 create mode 100644 board/isee/igep0030/config.mk
 create mode 100644 board/isee/igep0030/igep0030.c
 create mode 100644 board/isee/igep0030/igep0030.h
 create mode 100755 drivers/fpga/ivm_core.c
 create mode 100644 drivers/fpga/lattice.c
 create mode 100644 drivers/mmc/omap_hsmmc.c
 create mode 100644 drivers/usb/host/ehci-mxc.c
 create mode 100644 include/configs/igep0020.h
 create mode 100644 include/configs/igep0030.h
 create mode 100755 include/lattice.h

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Documentation is like sex: when it is good, it is  very,  very  good;
and when it is bad, it is better than nothing.         - Dick Brandon


More information about the U-Boot mailing list