[U-Boot] Pull request: u-boot-arm

[Wolfgang Denk]

In message <20101017182418.DE8EF13558AD at gemini.denx.de> you wrote:
> The following changes since commit e1b4c57096b87b4ada56df4154d9acee6a59141f:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-arm (2010-10-13 20:59:47 +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-arm.git master
> 
> Ben Gardiner (7):
>       davinci_nand, trivial : use symbolic ECC start command
>       da850evm : enable NAND even when not in NAND boot mode
>       da850evm: setup the NAND flash timings
>       da850evm: setup NAND support under CONFIG_USE_NAND
>       da850evm: add mtdpart and ubi commands with NAND support
>       da850evm: basic MII EMAC support
>       da850evm: fix linux bootparam address
> 
> Enric Balletbo i Serra (3):
>       OMAP3: SDRC: Introduce Numonyx DDR type
>       OMAP3: Add support for the IGEP v2 board.
>       OMAP3: Add support for the OMAP3 IGEP module.
> 
> Loic Minier (1):
>       mx51evk: add u-boot.imx to ALL target
> 
> Stefano Babic (6):
>       FPGA: add support for downloading Lattice bitstream
>       MX31: Adding missing iomux pin to MX.31 registers
>       MX31: Add support to update FPGA bitstream
>       MX31: add support for setting pin pads
>       MX31: Add support for MXC EHCI controller
>       MX31: Add USB Host support to the QONG board
> 
> Steve Sakoman (8):
>       env_mmc: Fix crashing bug encountered after enabling ARM relocation
>       ARMV7: OMAP: Use default vendor/product ID for USB gadget
>       ARMV7: OMAP4: Use generic mmc driver on Beagle
>       ARMV7: OMAP4: Use generic mmc driver on Overo
>       ARMV7: OMAP3: Implement relocation for Overo
>       ARMV7: OMAP3: Enable cache support on Overo
>       ARMV7: OMAP3: Fix bug in get_sdr_cs_offset()
>       ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP
> 
> Sukumar Ghorai (5):
>       MMC: Fix for capacity calculation on eMMC
>       ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMC
>       ARMV7: OMAP4: Use generic mmc driver on Panda
>       ARMV7: OMAP4: Use generic mmc driver on SDP4430
>       ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430
> 
> Wolfgang Denk (1):
>       Merge branch 'master' of git://git.denx.de/u-boot-imx
> 
>  MAINTAINERS                                    |    5 +
>  MAKEALL                                        |    2 +
>  arch/arm/cpu/arm1136/mx31/generic.c            |   17 +
>  arch/arm/cpu/armv7/omap3/sdrc.c                |    2 +-
>  arch/arm/cpu/armv7/omap4/board.c               |    5 +
>  arch/arm/include/asm/arch-mx31/mx31-regs.h     |  411 +++
>  arch/arm/include/asm/arch-omap3/mem.h          |   43 +
>  arch/arm/include/asm/arch-omap3/mmc_host_def.h |   10 +
>  arch/arm/include/asm/arch-omap4/mmc_host_def.h |   10 +
>  arch/arm/lib/board.c                           |   10 +-
>  board/davedenx/qong/Makefile                   |    2 +-
>  board/davedenx/qong/fpga.c                     |   95 +
>  board/davedenx/qong/qong.c                     |   44 +
>  board/davedenx/qong/qong_fpga.h                |    3 +-
>  board/davinci/da8xxevm/da850evm.c              |   89 +
>  board/freescale/mx51evk/config.mk              |    1 +
>  board/isee/igep0020/Makefile                   |   49 +
>  board/isee/igep0020/config.mk                  |   33 +
>  board/isee/igep0020/igep0020.c                 |  129 +
>  board/isee/igep0020/igep0020.h                 |  156 ++
>  board/isee/igep0030/Makefile                   |   49 +
>  board/isee/igep0030/config.mk                  |   34 +
>  board/isee/igep0030/igep0030.c                 |   71 +
>  board/isee/igep0030/igep0030.h                 |  147 ++
>  board/overo/config.mk                          |    2 +-
>  board/overo/overo.c                            |    9 +
>  board/ti/beagle/beagle.c                       |    9 +
>  board/ti/panda/config.mk                       |    4 +-
>  board/ti/panda/panda.c                         |    9 +
>  board/ti/sdp4430/config.mk                     |    3 +-
>  board/ti/sdp4430/sdp.c                         |   10 +
>  boards.cfg                                     |    2 +
>  common/env_mmc.c                               |   17 +-
>  drivers/fpga/Makefile                          |    1 +
>  drivers/fpga/fpga.c                            |   11 +
>  drivers/fpga/ivm_core.c                        | 3167 ++++++++++++++++++++++++
>  drivers/fpga/lattice.c                         |  399 +++
>  drivers/mmc/Makefile                           |    1 +
>  drivers/mmc/mmc.c                              |   11 +
>  drivers/mmc/omap_hsmmc.c                       |  415 ++++
>  drivers/mtd/nand/davinci_nand.c                |    3 +-
>  drivers/usb/host/Makefile                      |    1 +
>  drivers/usb/host/ehci-mxc.c                    |  130 +
>  drivers/video/mx3fb.c                          |   31 -
>  include/configs/da850evm.h                     |   54 +-
>  include/configs/igep0020.h                     |  228 ++
>  include/configs/igep0030.h                     |  215 ++
>  include/configs/omap3_beagle.h                 |   15 +-
>  include/configs/omap3_overo.h                  |   14 +-
>  include/configs/omap4_panda.h                  |   23 +-
>  include/configs/omap4_sdp4430.h                |   35 +-
>  include/configs/qong.h                         |   21 +-
>  include/fpga.h                                 |    1 +
>  include/lattice.h                              |  319 +++
>  54 files changed, 6472 insertions(+), 105 deletions(-)
>  create mode 100644 board/davedenx/qong/fpga.c
>  create mode 100644 board/isee/igep0020/Makefile
>  create mode 100644 board/isee/igep0020/config.mk
>  create mode 100644 board/isee/igep0020/igep0020.c
>  create mode 100644 board/isee/igep0020/igep0020.h
>  create mode 100644 board/isee/igep0030/Makefile
>  create mode 100644 board/isee/igep0030/config.mk
>  create mode 100644 board/isee/igep0030/igep0030.c
>  create mode 100644 board/isee/igep0030/igep0030.h
>  create mode 100755 drivers/fpga/ivm_core.c
>  create mode 100644 drivers/fpga/lattice.c
>  create mode 100644 drivers/mmc/omap_hsmmc.c
>  create mode 100644 drivers/usb/host/ehci-mxc.c
>  create mode 100644 include/configs/igep0020.h
>  create mode 100644 include/configs/igep0030.h
>  create mode 100755 include/lattice.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Computers are not intelligent.  They only think they are.