[U-Boot] Kirkwood: no console messages from init_sequence?

Eric Cooper ecc at cmu.edu
Mon Oct 18 21:35:27 CEST 2010


On Sun, Oct 17, 2010 at 08:40:31PM -0400, Eric Cooper wrote:
> I no longer see any of the early console messages that should result
> from display_banner, print_cpuinfo, etc.  The first thing I see is the
> NAND information:
> [...]

But if I load the same u-boot image into memory and execute it with
"go", I see the entire banner, DRAM message, etc.  So the problem only
occurs when it is booting from NAND flash.

-- 
Eric Cooper             e c c @ c m u . e d u


More information about the U-Boot mailing list