[U-Boot] [RFC 1/3] omap3evm: Move generic config options in common file

Sanjeev Premi premi at ti.com
Thu Oct 28 18:38:52 CEST 2010


This patch moves the most common config options into one file.
In addition to movement, attempt has been made to consolidate
related config options together.

Ideally, this patch should contain "deletion" from current
omap3_evm.h. But for this RFC, I am maintaining current file
and adding (only for example) another file omap3_evm_full.h
in next patch.

Signed-off-by: Sanjeev Premi <premi at ti.com>
---
 include/configs/omap3_evm_common.h |  269 ++++++++++++++++++++++++++++++++++++
 1 files changed, 269 insertions(+), 0 deletions(-)
 create mode 100644 include/configs/omap3_evm_common.h

diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
new file mode 100644
index 0000000..1d12153
--- /dev/null
+++ b/include/configs/omap3_evm_common.h
@@ -0,0 +1,269 @@
+/*
+ * Common configuration settings for the TI OMAP3 EVM board.
+ *
+ * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
+ * 
+ * Author :
+ *	Manikandan Pillai <mani.pillai at ti.com>
+ * Derived from Beagle Board and 3430 SDP code by
+ *	Richard Woodruff <r-woodruff2 at ti.com>
+ *	Syed Mohammed Khasim <khasim at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as 
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __OMAP3_EVM_COMMON_H
+#define __OMAP3_EVM_COMMON_H
+
+/*
+ * Common options for all OMAP3
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_EVM	1	/* working with EVM */
+
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+#undef CONFIG_USE_IRQ			/* no support for IRQs */
+
+/*
+ * Clock related definitions
+ */
+#define V_OSCK			26000000
+#define V_SCLK			(V_OSCK >> 1)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+							/* Sector */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
+#endif
+
+/*
+ * Physical Memory Map
+ * Note 1: CS1 may or may not be populated
+ * Note 2: SDRAM size is expected to be at least 32MB
+ */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE		(32 << 20)
+#define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
+
+/* Limits for memtest */
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+						0x01F00000) /* 31MB */
+/*
+ * SDRAM Bank Allocation method
+ */
+#define SDRC_R_B_C			1
+
+/*
+ * Default load address
+ */
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
+
+/*
+ * Support for relocation
+ */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - \
+						CONFIG_SYS_GBL_DATA_SIZE)
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SERIAL1			1	/* UART1 on OMAP3 EVM */
+#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}
+
+/*
+ * Size of Console IO Buffer
+ */
+#define CONFIG_SYS_CBSIZE		256
+
+/*
+ * Size of print buffer
+ */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+						sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/*
+ * Size of bootarg buffer
+ */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/*
+ * PISMO support
+ */
+#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
+
+/* Max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	520
+
+/* Max number of flash banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+
+#define CONFIG_SYS_FLASH_BASE		boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
+#define CONFIG_ENV_OFFSET		boot_flash_off
+#define CONFIG_ENV_ADDR			boot_flash_env_addr
+
+/*
+ * Start location of environment
+ */
+#define ONENAND_ENV_OFFSET		0x260000
+#define SMNAND_ENV_OFFSET		0x260000
+
+/*
+ * NAND
+ */
+/* Physical address to access NAND */
+#define CONFIG_SYS_NAND_ADDR		NAND_BASE
+
+/* Physical address to access NAND at CS0 */
+#define CONFIG_SYS_NAND_BASE		NAND_BASE
+
+/* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+/* Timeout values (in ticks) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
+
+/* Flash banks JFFS2 should use */
+#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
+						CONFIG_SYS_MAX_NAND_DEVICE)
+
+#define CONFIG_SYS_JFFS2_MEM_NAND
+#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV		"nand0"
+/* Start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET	0x680000
+/* Size of jffs2 partition */
+#define CONFIG_JFFS2_PART_SIZE		0xf980000
+
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * BOOTP fields
+ */
+#define CONFIG_BOOTP_SUBNETMASK		0x00000001
+#define CONFIG_BOOTP_GATEWAY		0x00000002
+#define CONFIG_BOOTP_HOSTNAME		0x00000004
+#define CONFIG_BOOTP_BOOTPATH		0x00000010
+
+#ifndef __ASSEMBLY__
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+/*
+ * Shell
+ */
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT		"OMAP3_EVM # "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_MAXARGS		16	/* max args for a command */
+
+#define CONFIG_ENV_OVERWRITE		1
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*
+ * Support for Linux
+ */
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+#define CONFIG_BOOTDELAY		10
+#define CONFIG_BOOTFILE			uImage
+
+/*
+ * Common commands
+ */
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+
+/*
+ * Other OMAP3 specific configurations
+ */
+#define CONFIG_TWL4030_POWER		1
+#define CONFIG_SDRC			1	/* chip has SDRC controller */
+#define CONFIG_OMAP3_MICRON_DDR		1
+
+#endif /* __OMAP3_EVM_COMMON_H */
+
+
-- 
1.7.2.2



More information about the U-Boot mailing list