[U-Boot] [PATCH 04/11] ARMV7: OMAP3: Convert setup_auxcr() to pure asm

[Steve Sakoman]

From: Mans Rullgard <mans at mansr.com>

This function consists entirely of inline asm statements, so writing
it directly in a .S file is simpler. Additionally, the inline asm is
not safe as is, since registers are not guaranteed to be preserved
between asm() statements.

Signed-off-by: Mans Rullgard <mans at mansr.com>
Signed-off-by: Steve Sakoman <steve at sakoman.com>
---
 arch/arm/cpu/armv7/omap3/board.c |   35 -----------------------------------
 arch/arm/cpu/armv7/omap3/cache.S |   19 +++++++++++++++++++
 2 files changed, 19 insertions(+), 35 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 69e56f5..6c2a132 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -120,41 +120,6 @@ void secureworld_exit()
 }
 
 /******************************************************************************
- * Routine: setup_auxcr()
- * Description: Write to AuxCR desired value using SMI.
- *              general use.
- *****************************************************************************/
-void setup_auxcr()
-{
-	unsigned long i;
-	volatile unsigned int j;
-	/* Save r0, r12 and restore them after usage */
-	__asm__ __volatile__("mov %0, r12":"=r"(j));
-	__asm__ __volatile__("mov %0, r0":"=r"(i));
-
-	/*
-	 * GP Device ROM code API usage here
-	 * r12 = AUXCR Write function and r0 value
-	 */
-	__asm__ __volatile__("mov r12, #0x3");
-	__asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
-	/* Enabling ASA */
-	__asm__ __volatile__("orr r0, r0, #0x10");
-	/* Enable L1NEON */
-	__asm__ __volatile__("orr r0, r0, #1 << 5");
-	/* SMI instruction to call ROM Code API */
-	__asm__ __volatile__(".word 0xE1600070");
-	/* Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround) */
-	__asm__ __volatile__("mov r12, #0x2");
-	__asm__ __volatile__("mrc p15, 1, r0, c9, c0, 2");
-	__asm__ __volatile__("orr r0, r0, #1 << 27");
-	/* SMI instruction to call ROM Code API */
-	__asm__ __volatile__(".word 0xE1600070");
-	__asm__ __volatile__("mov r0, %0":"=r"(i));
-	__asm__ __volatile__("mov r12, %0":"=r"(j));
-}
-
-/******************************************************************************
  * Routine: try_unlock_sram()
  * Description: If chip is GP/EMU(special) type, unlock the SRAM for
  *              general use.
diff --git a/arch/arm/cpu/armv7/omap3/cache.S b/arch/arm/cpu/armv7/omap3/cache.S
index cb7ca11..5a19051 100644
--- a/arch/arm/cpu/armv7/omap3/cache.S
+++ b/arch/arm/cpu/armv7/omap3/cache.S
@@ -43,6 +43,7 @@
 .global invalidate_dcache
 .global l2_cache_enable
 .global l2_cache_disable
+.global setup_auxcr
 
 /*
  *	invalidate_dcache()
@@ -156,3 +157,21 @@ l2_cache_disable:
 	mov	r0, #0
 	b	l2_cache_set
 
+/******************************************************************************
+ * Routine: setup_auxcr()
+ * Description: Write to AuxCR desired value using SMI.
+ *              general use.
+ *****************************************************************************/
+setup_auxcr:
+	mov	r12, #0x3
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #0x10			@ Enable ASA
+	orr	r0, r0, #1 << 5			@ Enable L1NEON
+	.word 0xE1600070			@ SMC
+	mov	r12, #0x2
+	mrc	p15, 1, r0, c9, c0, 2
+	@ Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround)
+	orr	r0, r0, #1 << 27
+	.word 0xE1600070			@ SMC
+	bx	lr
+
-- 
1.7.0.4