[U-Boot] [PATCH 03/11] ARMV7: OMAP3: Fix and clean up L2 cache enable/disable functions

[Steve Sakoman]

From: Mans Rullgard <mans at mansr.com>

On OMAP34xx ES1.0, the L2 enable bit can only be set in secure mode,
so an SMC call to the ROM monitor is required.  On later versions,
and on newer devices, this bit is banked and we can set it directly.

The code checked only the ES revision of the chip, and hence incorrectly
used the ROM call on ES1.0 versions of other devices.

This patch adds a check for chip family as well as revision, and also
removes some code duplication between the enable and disable functions.

Signed-off-by: Mans Rullgard <mans at mansr.com>
Signed-off-by: Steve Sakoman <steve at sakoman.com>
---
 arch/arm/cpu/armv7/omap3/cache.S |   75 +++++++++++---------------------------
 1 files changed, 21 insertions(+), 54 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap3/cache.S b/arch/arm/cpu/armv7/omap3/cache.S
index 4b65ac5..cb7ca11 100644
--- a/arch/arm/cpu/armv7/omap3/cache.S
+++ b/arch/arm/cpu/armv7/omap3/cache.S
@@ -128,64 +128,31 @@ finished_inval:
 
 	ldmfd	r13!, {r0 - r5, r7, r9 - r12, pc}
 
-
-l2_cache_enable:
-	stmfd	r13!, {r0, r1, r2, lr}
-	@ ES2 onwards we can disable/enable L2 ourselves
+l2_cache_set:
+	stmfd	r13!, {r4 - r6, lr}
+	mov	r5,  r0
 	bl	get_cpu_rev
-	cmp	r0, #CPU_3XX_ES20
-	blt	l2_cache_disable_EARLIER_THAN_ES2
-	mrc	15, 0, r3, cr1, cr0, 1
-	orr	r3, r3, #2
-	mcr	15, 0, r3, cr1, cr0, 1
-	b	l2_cache_enable_END
-l2_cache_enable_EARLIER_THAN_ES2:
-	@ Save r0, r12 and restore them after usage
-	mov	r3, ip
-	str	r3, [sp, #4]
-	mov	r3, r0
-	@
+	mov	r4,  r0
+	bl	get_cpu_family
+	@ ES2 onwards we can disable/enable L2 ourselves
+	cmp	r0,  #CPU_OMAP34XX
+	cmpeq	r4,  #CPU_3XX_ES10
+	mrc	15, 0, r0, cr1, cr0, 1
+	bic	r0, r0, #2
+	orr	r0, r0, r5, lsl #1
+	mcreq	15, 0, r0, cr1, cr0, 1
 	@ GP Device ROM code API usage here
 	@ r12 = AUXCR Write function and r0 value
-	@
 	mov	ip, #3
-	mrc	15, 0, r0, cr1, cr0, 1
-	orr	r0, r0, #2
-	@ SMI instruction to call ROM Code API
-	.word	0xe1600070
-	mov	r0, r3
-	mov	ip, r3
-	str	r3, [sp, #4]
-l2_cache_enable_END:
-	ldmfd	r13!, {r1, r2, r3, pc}
+	@ SMCNE instruction to call ROM Code API
+	.word	0x11600070
+	ldmfd	r13!, {r4 - r6, pc}
 
+l2_cache_enable:
+	mov	r0, #1
+	b	l2_cache_set
 
 l2_cache_disable:
-	stmfd	r13!, {r0, r1, r2, lr}
-	@ ES2 onwards we can disable/enable L2 ourselves
-	bl	get_cpu_rev
-	cmp	r0, #CPU_3XX_ES20
-	blt	l2_cache_disable_EARLIER_THAN_ES2
-	mrc	15, 0, r3, cr1, cr0, 1
-	bic	r3, r3, #2
-	mcr	15, 0, r3, cr1, cr0, 1
-	b	l2_cache_disable_END
-l2_cache_disable_EARLIER_THAN_ES2:
-	@ Save r0, r12 and restore them after usage
-	mov	r3, ip
-	str	r3, [sp, #4]
-	mov	r3, r0
-	@
-	@ GP Device ROM code API usage here
-	@ r12 = AUXCR Write function and r0 value
-	@
-	mov	ip, #3
-	mrc	15, 0, r0, cr1, cr0, 1
-	bic	r0, r0, #2
-	@ SMI instruction to call ROM Code API
-	.word	0xe1600070
-	mov	r0, r3
-	mov	ip, r3
-	str	r3, [sp, #4]
-l2_cache_disable_END:
-	ldmfd	r13!, {r1, r2, r3, pc}
+	mov	r0, #0
+	b	l2_cache_set
+
-- 
1.7.0.4