[U-Boot] [PATCH 08/11] mtd: nand: honor CONFIG_SYS_NAND_QUIET_TEST with unknown NAND printk

Paulraj, Sandeep s-paulraj at ti.com
Wed Sep 1 02:18:27 CEST 2010



> 
> This printk was added recently and results in ugly output on systems
> with no NAND:
> 
> NAND:  nand_get_flash_type: unknown NAND device: Manufacturer ID: 0x00,
> Chip ID: 0x00 0 MiB
> 
> instead of:
> 
> NAND:  0 MiB

Scott,

What do you think of this patch?



> 
> Signed-off-by: Steve Sakoman <steve at sakoman.com>
> ---
>  drivers/mtd/nand/nand_base.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index ed1c9c9..cbcf2b8 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -2653,9 +2653,11 @@ static struct nand_flash_dev
> *nand_get_flash_type(struct mtd_info *mtd,
>  	}
> 
>  	if (!type) {
> +#ifndef CONFIG_SYS_NAND_QUIET_TEST
>  		printk(KERN_INFO "%s: unknown NAND device: Manufacturer ID:"
>  		       " 0x%02x, Chip ID: 0x%02x\n", __func__,
>  		       *maf_id, dev_id);
> +#endif
>  		return ERR_PTR(-ENODEV);
>  	}
> 
> --
> 1.7.0.4
> 



More information about the U-Boot mailing list