[U-Boot] [PATCH] ehci-pci: print hccr, hcor and hc_lenght

Florian Fainelli f.fainelli at gmail.com
Sun Sep 12 14:24:25 CEST 2010


Hi Remy,

Le Sunday 12 September 2010 12:01:18, Remy Bohmer a écrit :
> Hi Florian,
> 
> 2010/4/23 Florian Fainelli <f.fainelli at gmail.com>:
> > It is useful to know the EHCI-PCI hccr, hcor and hc_lenght to make sure
> > it was successfully registered, and at the correct location.
> > 
> > Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
> > ---
> > diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
> > index 047902a..4402abb 100644
> > --- a/drivers/usb/host/ehci-pci.c
> > +++ b/drivers/usb/host/ehci-pci.c
> > @@ -53,6 +53,10 @@ int ehci_hcd_init(void)
> >        hcor = (struct ehci_hcor *)((uint32_t) hccr +
> >                        HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> > 
> > +       printf("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
> > +                       (uint32_t)hccr, (uint32_t)hcor,
> > +                      
> > (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); +
> 
> I guess I missed this patch...

No problem.

> Should the 'printf' not be a 'debug' statement?

I think so, I will respin this patch. Thanks!
-- 
Florian


More information about the U-Boot mailing list