[U-Boot] [PATCH v3] NET: add ENC28J60 driver using SPI framework
Reinhard Meyer
u-boot at emk-elektronik.de
Sun Sep 12 16:23:49 CEST 2010
V3: further refinements:
- use priv member instead of container method
- allow setting of MAC address by write_hwaddr method
- avoid shutting down link between commands
Signed-off-by: Reinhard Meyer <u-boot at emk-elektronik.de>
---
drivers/net/Makefile | 1 +
drivers/net/enc28j60.c | 978 ++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/enc28j60.h | 251 +++++++++++++
include/netdev.h | 2 +
4 files changed, 1232 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/enc28j60.c
create mode 100644 drivers/net/enc28j60.h
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 479954d..79eb66b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -39,6 +39,7 @@ COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
COBJS-$(CONFIG_DNET) += dnet.o
COBJS-$(CONFIG_E1000) += e1000.o
COBJS-$(CONFIG_EEPRO100) += eepro100.o
+COBJS-$(CONFIG_ENC28J60) += enc28j60.o
COBJS-$(CONFIG_ENC28J60_LPC2292) += enc28j60_lpc2292.o
COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o
COBJS-$(CONFIG_ETHOC) += ethoc.o
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
new file mode 100644
index 0000000..9b918ab
--- /dev/null
+++ b/drivers/net/enc28j60.c
@@ -0,0 +1,978 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer at emk-elektronik.de
+ * Martin Krause, Martin.Krause at tqs.de
+ * reworked original enc28j60.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <spi.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include "enc28j60.h"
+
+/*
+ * IMPORTANT: spi_claim_bus() and spi_release_bus()
+ * are called at begin and end of each of the following functions:
+ * enc_miiphy_read(), enc_miiphy_write(), enc_write_hwaddr(),
+ * enc_init(), enc_recv(), enc_send(), enc_halt()
+ * ALL other functions assume that the bus has already been claimed!
+ * Since NetReceive() might call enc_send() in return, the bus must be
+ * released, NetReceive() called and claimed again.
+ */
+
+/*
+ * Controller memory layout.
+ * We only allow 1 frame for transmission and reserve the rest
+ * for reception to handle as many broadcast packets as possible.
+ * Also use the memory from 0x0000 for receiver buffer. See errata pt. 5
+ * 0x0000 - 0x19ff 6656 bytes receive buffer
+ * 0x1a00 - 0x1fff 1536 bytes transmit buffer =
+ * control(1)+frame(1518)+status(7)+reserve(10).
+ */
+#define ENC_RX_BUF_START 0x0000
+#define ENC_RX_BUF_END 0x19ff
+#define ENC_TX_BUF_START 0x1a00
+#define ENC_TX_BUF_END 0x1fff
+#define ENC_MAX_FRM_LEN 1518
+#define RX_RESET_COUNTER 1000
+
+/*
+ * For non data transfer functions, like phy read/write, set hwaddr, init
+ * we do not need a full, time consuming init including link ready wait.
+ * This enum helps to bring the chip through the minimum necessary inits.
+ */
+enum enc_initstate {none=0, setupdone, linkready};
+typedef struct enc_device {
+ struct eth_device *dev; /* back pointer */
+ struct spi_slave *slave;
+ int rx_reset_counter;
+ u16 next_pointer;
+ u8 bank; /* current bank in enc28j60 */
+ enum enc_initstate initstate;
+} enc_dev_t;
+
+/*
+ * enc_bset: set bits in a common register
+ * enc_bclr: clear bits in a common register
+ *
+ * making the reg parameter u8 will give a compile time warning if the
+ * functions are called with a register not accessible in all Banks
+ */
+static void enc_bset(enc_dev_t *enc, const u8 reg, const u8 data)
+{
+ u8 dout[2];
+
+ dout[0] = CMD_BFS(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
+
+static void enc_bclr(enc_dev_t *enc, const u8 reg, const u8 data)
+{
+ u8 dout[2];
+
+ dout[0] = CMD_BFC(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
+
+/*
+ * high byte of the register contains bank number:
+ * 0: no bank switch necessary
+ * 1: switch to bank 0
+ * 2: switch to bank 1
+ * 3: switch to bank 2
+ * 4: switch to bank 3
+ */
+static void enc_set_bank(enc_dev_t *enc, const u16 reg)
+{
+ u8 newbank = reg >> 8;
+
+ if (newbank == 0 || newbank == enc->bank)
+ return;
+ switch (newbank) {
+ case 1:
+ enc_bclr(enc, CTL_REG_ECON1,
+ ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
+ break;
+ case 2:
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ break;
+ case 3:
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ break;
+ case 4:
+ enc_bset(enc, CTL_REG_ECON1,
+ ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
+ break;
+ }
+ enc->bank = newbank;
+}
+
+/*
+ * local functions to access SPI
+ *
+ * reg: register inside ENC28J60
+ * data: 8/16 bits to write
+ * c: number of retries
+ *
+ * enc_r8: read 8 bits
+ * enc_r16: read 16 bits
+ * enc_w8: write 8 bits
+ * enc_w16: write 16 bits
+ * enc_w8_retry: write 8 bits, verify and retry
+ * enc_rbuf: read from ENC28J60 into buffer
+ * enc_wbuf: write from buffer into ENC28J60
+ */
+
+/*
+ * MAC and MII registers need a 3 byte SPI transfer to read,
+ * all other registers need a 2 byte SPI transfer.
+ */
+static int enc_reg2nbytes(const u16 reg)
+{
+ /* check if MAC or MII register */
+ return ((reg >= CTL_REG_MACON1 && reg <= CTL_REG_MIRDH) ||
+ (reg >= CTL_REG_MAADR1 && reg <= CTL_REG_MAADR4) ||
+ (reg == CTL_REG_MISTAT)) ? 3 : 2;
+}
+
+/*
+ * Read a byte register
+ */
+static u8 enc_r8(enc_dev_t *enc, const u16 reg)
+{
+ u8 dout[3];
+ u8 din[3];
+ int nbytes = enc_reg2nbytes(reg);
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_RCR(reg);
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ return din[nbytes-1];
+}
+
+/*
+ * Read a L/H register pair and return a word.
+ * Must be called with the L register's address.
+ */
+static u16 enc_r16(enc_dev_t *enc, const u16 reg)
+{
+ u8 dout[3];
+ u8 din[3];
+ u16 result;
+ int nbytes = enc_reg2nbytes(reg);
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_RCR(reg);
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ result = din[nbytes-1];
+ dout[0]++; /* next register */
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ result |= din[nbytes-1] << 8;
+ return result;
+}
+
+/*
+ * Write a byte register
+ */
+static void enc_w8(enc_dev_t *enc, const u16 reg, const u8 data)
+{
+ u8 dout[2];
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
+
+/*
+ * Write a L/H register pair.
+ * Must be called with the L register's address.
+ */
+static void enc_w16(enc_dev_t *enc, const u16 reg, const u16 data)
+{
+ u8 dout[2];
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ dout[0]++; /* next register */
+ dout[1] = data >> 8;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
+
+/*
+ * Write a byte register, verify and retry
+ */
+static void enc_w8_retry(enc_dev_t *enc, const u16 reg, const u8 data, const int c)
+{
+ u8 dout[2];
+ u8 readback;
+ int i;
+
+ enc_set_bank(enc, reg);
+ for (i = 0; i < c; i++) {
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ readback = enc_r8(enc, reg);
+ if (readback == data)
+ break;
+ /* wait 1ms */
+ udelay(1000);
+ }
+ if (i == c) {
+ printf("%s: write reg 0x%03x failed\n", enc->dev->name, reg);
+ }
+}
+
+/*
+ * Read ENC RAM into buffer
+ */
+static void enc_rbuf(enc_dev_t *enc, const u16 length, u8 *buf)
+{
+ u8 dout[1];
+
+ dout[0] = CMD_RBM;
+ spi_xfer(enc->slave, 8, dout, NULL, SPI_XFER_BEGIN);
+ spi_xfer(enc->slave, length * 8, NULL, buf, SPI_XFER_END);
+#ifdef DEBUG
+ puts("Rx:\n");
+ print_buffer(0, buf, 1, length, 0);
+#endif
+}
+
+/*
+ * Write buffer into ENC RAM
+ */
+static void enc_wbuf(enc_dev_t *enc, const u16 length, const u8 *buf, const u8 control)
+{
+ u8 dout[2];
+ dout[0] = CMD_WBM;
+ dout[1] = control;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL, SPI_XFER_BEGIN);
+ spi_xfer(enc->slave, length * 8, buf, NULL, SPI_XFER_END);
+#ifdef DEBUG
+ puts("Tx:\n");
+ print_buffer(0, buf, 1, length, 0);
+#endif
+}
+
+/*
+ * Try to claim the SPI bus.
+ * Print error message on failure.
+ */
+static int enc_claim_bus(enc_dev_t *enc)
+{
+ int rc = spi_claim_bus(enc->slave);
+ if (rc)
+ printf("%s: failed to claim SPI bus\n", enc->dev->name);
+ return rc;
+}
+
+/*
+ * Release previously claimed SPI bus.
+ * This function is mainly for symmetry to enc_claim_bus().
+ * Let the toolchain decide to inline it...
+ */
+static void enc_release_bus(enc_dev_t *enc)
+{
+ spi_release_bus(enc->slave);
+}
+
+/*
+ * Read PHY register
+ */
+static u16 phy_read(enc_dev_t *enc, const u8 addr)
+{
+ uint64_t etime;
+ u8 status;
+
+ enc_w8(enc, CTL_REG_MIREGADR, addr);
+ enc_w8(enc, CTL_REG_MICMD, ENC_MICMD_MIIRD);
+ /* 1 second timeout - only happens on hardware problem */
+ etime = get_ticks() + get_tbclk();
+ /* poll MISTAT.BUSY bit until operation is complete */
+ do
+ {
+ status = enc_r8(enc, CTL_REG_MISTAT);
+ } while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
+ if (status & ENC_MISTAT_BUSY) {
+ printf("%s: timeout reading phy\n", enc->dev->name);
+ return 0;
+ }
+ enc_w8(enc, CTL_REG_MICMD, 0);
+ return enc_r16(enc, CTL_REG_MIRDL);
+}
+
+/*
+ * Write PHY register
+ */
+static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
+{
+ uint64_t etime;
+ u8 status;
+
+ enc_w8(enc, CTL_REG_MIREGADR, addr);
+ enc_w16(enc, CTL_REG_MIWRL, data);
+ /* 1 second timeout - only happens on hardware problem */
+ etime = get_ticks() + get_tbclk();
+ /* poll MISTAT.BUSY bit until operation is complete */
+ do
+ {
+ status = enc_r8(enc, CTL_REG_MISTAT);
+ } while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
+ if (status & ENC_MISTAT_BUSY) {
+ printf("%s: timeout writing phy\n", enc->dev->name);
+ return;
+ }
+}
+
+/*
+ * Verify link status, wait if necessary
+ *
+ * Note: with a 10 MBit/s only PHY there is no autonegotiation possible,
+ * half/full duplex is a pure setup matter. For the time being, this driver
+ * will setup in half duplex mode only.
+ */
+static int enc_phy_link_wait(enc_dev_t *enc)
+{
+ u16 status;
+ int duplex;
+ uint64_t etime;
+
+#ifdef CONFIG_ENC_SILENTLINK
+ /* check if we have a link, then just return */
+ status = phy_read(enc, PHY_REG_PHSTAT1);
+ if (status & ENC_PHSTAT1_LLSTAT)
+ return 0;
+#endif
+
+ /* wait for link with 1 second timeout */
+ etime = get_ticks() + get_tbclk();
+ while (get_ticks() <= etime) {
+ status = phy_read(enc, PHY_REG_PHSTAT1);
+ if (status & ENC_PHSTAT1_LLSTAT) {
+ /* now we have a link */
+ status = phy_read(enc, PHY_REG_PHSTAT2);
+ duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
+ printf("%s: link up, 10Mbps %s-duplex\n",
+ enc->dev->name, duplex ? "full" : "half");
+ return 0;
+ }
+ udelay(1000);
+ }
+
+ /* timeout occured */
+ printf("%s: link down\n", enc->dev->name);
+ return 1;
+}
+
+/*
+ * This function resets the receiver only.
+ */
+static void enc_reset_rx(enc_dev_t *enc)
+{
+ u8 econ1;
+
+ econ1 = enc_r8(enc, CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
+ enc->rx_reset_counter = RX_RESET_COUNTER;
+ }
+}
+
+/*
+ * Reset receiver and reenable it.
+ */
+static void enc_reset_rx_call(enc_dev_t *enc)
+{
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+}
+
+/*
+ * Copy a packet from the receive ring and forward it to
+ * the protocol stack.
+ */
+static void enc_receive(enc_dev_t *enc)
+{
+ u8 *packet = (u8 *)NetRxPackets[0];
+ u16 pkt_len;
+ u16 copy_len;
+ u16 status;
+ u8 eir_reg;
+ u8 pkt_cnt = 0;
+ u16 rxbuf_rdpt;
+ u8 hbuf[6];
+
+ enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
+ do {
+ enc_rbuf(enc, 6, hbuf);
+ enc->next_pointer = hbuf[0] | (hbuf[1] << 8);
+ pkt_len = hbuf[2] | (hbuf[3] << 8);
+ status = hbuf[4] | (hbuf[5] << 8);
+ debug("next_pointer=$%04x pkt_len=%u status=$%04x\n",
+ enc->next_pointer, pkt_len, status);
+ if (pkt_len <= ENC_MAX_FRM_LEN)
+ copy_len = pkt_len;
+ else
+ copy_len = 0;
+ if ((status & (1L << 7)) == 0) /* check Received Ok bit */
+ copy_len = 0;
+ /* check if next pointer is resonable */
+ if (enc->next_pointer >= ENC_TX_BUF_START)
+ copy_len = 0;
+ if (copy_len > 0) {
+ enc_rbuf(enc, copy_len, packet);
+ }
+ /* advance read pointer to next pointer */
+ enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
+ /* decrease packet counter */
+ enc_bset(enc, CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+ /*
+ * Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = enc->next_pointer - 1;
+ if ((rxbuf_rdpt < enc_r16(enc, CTL_REG_ERXSTL)) ||
+ (rxbuf_rdpt > enc_r16(enc, CTL_REG_ERXNDL))) {
+ enc_w16(enc, CTL_REG_ERXRDPTL,
+ enc_r16(enc, CTL_REG_ERXNDL));
+ } else {
+ enc_w16(enc, CTL_REG_ERXRDPTL, rxbuf_rdpt);
+ }
+ /* read pktcnt */
+ pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
+ if (copy_len == 0) {
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ enc_reset_rx(enc);
+ printf("%s: receive copy_len=0\n", enc->dev->name);
+ continue;
+ }
+ /*
+ * Because NetReceive() might call enc_send(), we need to
+ * release the SPI bus, call NetReceive(), reclaim the bus
+ */
+ enc_release_bus(enc);
+ NetReceive(packet, pkt_len);
+ if (enc_claim_bus(enc))
+ return;
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ } while (pkt_cnt);
+ /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
+}
+
+/*
+ * Poll for completely received packets.
+ */
+static void enc_poll(enc_dev_t *enc)
+{
+ u8 eir_reg;
+ u8 estat_reg;
+ u8 pkt_cnt;
+
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = enc_r8(enc, CTL_REG_ESTAT);
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXIF);
+ }
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+ pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ debug("enc_poll: pkt cnt > 0, but pktif not set\n");
+ }
+ enc_receive(enc);
+ /*
+ * clear PKTIF bit in EIR, this should not need to be done
+ * but it seems like we get problems if we do not
+ */
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_PKTIF);
+ }
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf("%s: rx error\n", enc->dev->name);
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_RXERIF);
+ }
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf("%s: tx error\n", enc->dev->name);
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF);
+ }
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+/*
+ * Completely Reset the ENC
+ */
+static void enc_reset(enc_dev_t *enc)
+{
+ u8 dout[1];
+
+ dout[0] = CMD_SRC;
+ spi_xfer(enc->slave, 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ /* sleep 1 ms. See errata pt. 2 */
+ udelay(1000);
+}
+
+/*
+ * Initialisation data for most of the ENC registers
+ */
+static const u16 enc_initdata[] = {
+ /*
+ * Setup the buffer space. The reset values are valid for the
+ * other pointers.
+ *
+ * We shall not write to ERXST, see errata pt. 5. Instead we
+ * have to make sure that ENC_RX_BUS_START is 0.
+ */
+ CTL_REG_ERXSTL, ENC_RX_BUF_START,
+ CTL_REG_ERXSTH, ENC_RX_BUF_START >> 8,
+ CTL_REG_ERXNDL, ENC_RX_BUF_END,
+ CTL_REG_ERXNDH, ENC_RX_BUF_END >> 8,
+ CTL_REG_ERDPTL, ENC_RX_BUF_START,
+ CTL_REG_ERDPTH, ENC_RX_BUF_START >> 8,
+ /*
+ * Set the filter to receive only good-CRC, unicast and broadcast
+ * frames.
+ * Note: some DHCP servers return their answers as broadcasts!
+ * So its unwise to remove broadcast from this. This driver
+ * might incur receiver overruns with packet loss on a broadcast
+ * flooded network.
+ */
+ CTL_REG_ERXFCON, ENC_RFR_BCEN | ENC_RFR_UCEN | ENC_RFR_CRCEN,
+
+ /* enable MAC to receive frames */
+ CTL_REG_MACON1,
+ ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS,
+
+ /* configure pad, tx-crc and duplex */
+ CTL_REG_MACON3,
+ ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN |
+ ENC_MACON3_FRMLNEN,
+
+ /* Allow infinite deferals if the medium is continously busy */
+ CTL_REG_MACON4, ENC_MACON4_DEFER,
+
+ /* Late collisions occur beyond 63 bytes */
+ CTL_REG_MACLCON2, 63,
+
+ /*
+ * Set (low byte) Non-Back-to_Back Inter-Packet Gap.
+ * Recommended 0x12
+ */
+ CTL_REG_MAIPGL, 0x12,
+
+ /*
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap.
+ * Recommended 0x0c for half-duplex. Nothing for full-duplex
+ */
+ CTL_REG_MAIPGH, 0x0C,
+
+ /* set maximum frame length */
+ CTL_REG_MAMXFLL, ENC_MAX_FRM_LEN,
+ CTL_REG_MAMXFLH, ENC_MAX_FRM_LEN >> 8,
+
+ /*
+ * Set MAC back-to-back inter-packet gap.
+ * Recommended 0x12 for half duplex
+ * and 0x15 for full duplex.
+ */
+ CTL_REG_MABBIPG, 0x12,
+
+ /* end of table */
+ 0xffff
+};
+
+/*
+ * Wait for the XTAL oscillator to become ready
+ */
+static int enc_clock_wait(enc_dev_t *enc)
+{
+ uint64_t etime;
+
+ /* one second timeout */
+ etime = get_ticks() + get_tbclk();
+
+ /*
+ * Wait for CLKRDY to become set (i.e., check that we can
+ * communicate with the ENC)
+ */
+ do
+ {
+ if (enc_r8(enc, CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY)
+ return 0;
+ } while (get_ticks() <= etime);
+
+ printf("%s: timeout waiting for CLKRDY\n", enc->dev->name);
+ return -1;
+}
+
+/*
+ * Write the MAC address into the ENC
+ */
+static int enc_write_macaddr(enc_dev_t *enc)
+{
+ unsigned char *p = enc->dev->enetaddr;
+
+ enc_w8_retry(enc, CTL_REG_MAADR5, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR4, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR3, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR2, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR1, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR0, *p, 5);
+ return 0;
+}
+
+/*
+ * Setup most of the ENC registers
+ */
+static int enc_setup(enc_dev_t *enc)
+{
+ u16 phid1 = 0;
+ u16 phid2 = 0;
+ const u16 *tp;
+
+ /* reset enc struct values */
+ enc->next_pointer = ENC_RX_BUF_START;
+ enc->rx_reset_counter = RX_RESET_COUNTER;
+ enc->bank = 0xff; /* invalidate current bank in enc28j60 */
+
+ /* verify PHY identification */
+ phid1 = phy_read(enc, PHY_REG_PHID1);
+ phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
+ if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
+ printf("%s: failed to identify PHY. Found %04x:%04x\n",
+ enc->dev->name, phid1, phid2);
+ return -1;
+ }
+
+ /* now program registers */
+ for (tp = enc_initdata; *tp != 0xffff; tp += 2)
+ enc_w8_retry(enc, tp[0], tp[1], 10);
+
+ /*
+ * Prevent automatic loopback of data beeing transmitted by setting
+ * ENC_PHCON2_HDLDIS
+ */
+ phy_write(enc, PHY_REG_PHCON2, (1<<8));
+
+ /*
+ * LEDs configuration
+ * LEDA: LACFG = 0100 -> display link status
+ * LEDB: LBCFG = 0111 -> display TX & RX activity
+ * STRCH = 1 -> LED pulses
+ */
+ phy_write(enc, PHY_REG_PHLCON, 0x0472);
+
+ /* Reset PDPXMD-bit => half duplex */
+ phy_write(enc, PHY_REG_PHCON1, 0);
+
+#ifdef CONFIG_USE_IRQ
+ /* enable interrupts */
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+
+ return 0;
+}
+
+/*
+ * Check if ENC has been initialized.
+ * If not, try to initialize it.
+ * Remember initialized state in struct.
+ */
+static int enc_initcheck(enc_dev_t *enc, const enum enc_initstate requiredstate)
+{
+ if (enc->initstate >= requiredstate)
+ return 0;
+
+ if (enc->initstate < setupdone) {
+ /* Initialize the ENC only */
+ enc_reset(enc);
+ /* if any of functions fails, skip the rest and return an error */
+ if (enc_clock_wait(enc) || enc_setup(enc) || enc_write_macaddr(enc)) {
+ return -1;
+ }
+ enc->initstate = setupdone;
+ }
+ /* if that's all we need, return here */
+ if (enc->initstate >= requiredstate)
+ return 0;
+
+ /* now wait for link ready condition */
+ if (enc_phy_link_wait(enc)) {
+ return -1;
+ }
+ enc->initstate = linkready;
+ return 0;
+}
+
+#if defined(CONFIG_CMD_MII)
+/*
+ * Read a PHY register.
+ *
+ * This function is registered with miiphy_register().
+ */
+int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ enc_dev_t *enc;
+
+ if (!dev || phy_adr != 0)
+ return -1;
+
+ enc = dev->priv;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ *value = phy_read(enc, reg);
+ enc_release_bus(enc);
+ return 0;
+}
+
+/*
+ * Write a PHY register.
+ *
+ * This function is registered with miiphy_register().
+ */
+int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ enc_dev_t *enc;
+
+ if (!dev || phy_adr != 0)
+ return -1;
+
+ enc = dev->priv;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ phy_write(enc, reg, value);
+ enc_release_bus(enc);
+ return 0;
+}
+#endif
+
+/*
+ * Write hardware (MAC) address.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_write_hwaddr(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
+
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ enc_release_bus(enc);
+ return 0;
+}
+
+/*
+ * Initialize ENC28J60 for use.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_init(struct eth_device *dev, bd_t *bis)
+{
+ enc_dev_t *enc = dev->priv;
+
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* enable receive */
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+ enc_release_bus(enc);
+ return 0;
+}
+
+/*
+ * Check for received packets.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_recv(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
+
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* Check for dead receiver */
+ if (enc->rx_reset_counter > 0)
+ enc->rx_reset_counter--;
+ else
+ enc_reset_rx_call(enc);
+ enc_poll(enc);
+ enc_release_bus(enc);
+ return 0;
+}
+
+/*
+ * Send a packet.
+ *
+ * This function entered into eth_device structure.
+ *
+ * Should we wait here until we have a Link? Or shall we leave that to
+ * protocol retries?
+ */
+static int enc_send(
+ struct eth_device *dev,
+ volatile void *packet,
+ int length)
+{
+ enc_dev_t *enc = dev->priv;
+
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* setup transmit pointers */
+ enc_w16(enc, CTL_REG_EWRPTL, ENC_TX_BUF_START);
+ enc_w16(enc, CTL_REG_ETXNDL, length + ENC_TX_BUF_START);
+ enc_w16(enc, CTL_REG_ETXSTL, ENC_TX_BUF_START);
+ /* write packet to ENC */
+ enc_wbuf(enc, length, (u8 *) packet, 0x00);
+ /*
+ * Check that the internal transmit logic has not been altered
+ * by excessive collisions. Reset transmitter if so.
+ * See Errata B4 12 and 14.
+ */
+ if (enc_r8(enc, CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ enc_bclr(enc, CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+ /* start transmitting */
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRTS);
+ enc_release_bus(enc);
+ return 0;
+}
+
+/*
+ * Finish use of ENC.
+ *
+ * This function entered into eth_device structure.
+ */
+static void enc_halt(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
+
+ if (enc_claim_bus(enc))
+ return;
+ /* Just disable receiver */
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+ enc_release_bus(enc);
+}
+
+/*
+ * This is the only exported function.
+ *
+ * It may be called several times with different bus:cs combinations.
+ */
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct eth_device *dev;
+ enc_dev_t *enc;
+
+ /* try to allocate, check and clear eth_device object */
+ dev = malloc(sizeof(*dev));
+ if (!dev) {
+ return -1;
+ }
+ memset(dev, 0, sizeof(*dev));
+
+ /* try to allocate, check and clear enc_dev_t object */
+ enc = malloc(sizeof(*enc));
+ if (!enc) {
+ free(dev);
+ return -1;
+ }
+ memset(enc, 0, sizeof(*enc));
+
+ /* try to setup the SPI slave */
+ enc->slave = spi_setup_slave(bus, cs, max_hz, mode);
+ if (!enc->slave) {
+ printf("enc28j60: invalid SPI device %i:%i\n", bus, cs);
+ free(enc);
+ free(dev);
+ return -1;
+ }
+
+ enc->dev = dev;
+ /* now fill the eth_device object */
+ dev->priv = enc;
+ dev->init = enc_init;
+ dev->halt = enc_halt;
+ dev->send = enc_send;
+ dev->recv = enc_recv;
+ dev->write_hwaddr = enc_write_hwaddr;
+ sprintf(dev->name, "enc%i.%i", bus, cs);
+ eth_register(dev);
+#if defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name, enc_miiphy_read, enc_miiphy_write);
+#endif
+ return 0;
+}
diff --git a/drivers/net/enc28j60.h b/drivers/net/enc28j60.h
new file mode 100644
index 0000000..888c599
--- /dev/null
+++ b/drivers/net/enc28j60.h
@@ -0,0 +1,251 @@
+/*
+ * (X) extracted from enc28j60.c
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer at emk-elektronik.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _enc28j60_h
+#define _enc28j60_h
+
+/*
+ * SPI Commands
+ *
+ * Bits 7-5: Command
+ * Bits 4-0: Register
+ */
+#define CMD_RCR(x) (0x00+((x)&0x1f)) /* Read Control Register */
+#define CMD_RBM 0x3a /* Read Buffer Memory */
+#define CMD_WCR(x) (0x40+((x)&0x1f)) /* Write Control Register */
+#define CMD_WBM 0x7a /* Write Buffer Memory */
+#define CMD_BFS(x) (0x80+((x)&0x1f)) /* Bit Field Set */
+#define CMD_BFC(x) (0xa0+((x)&0x1f)) /* Bit Field Clear */
+#define CMD_SRC 0xff /* System Reset Command */
+
+/* NEW: encode (bank number+1) in upper byte */
+
+/* Common Control Registers accessible in all Banks */
+#define CTL_REG_EIE 0x01B
+#define CTL_REG_EIR 0x01C
+#define CTL_REG_ESTAT 0x01D
+#define CTL_REG_ECON2 0x01E
+#define CTL_REG_ECON1 0x01F
+
+/* Control Registers accessible in Bank 0 */
+#define CTL_REG_ERDPTL 0x100
+#define CTL_REG_ERDPTH 0x101
+#define CTL_REG_EWRPTL 0x102
+#define CTL_REG_EWRPTH 0x103
+#define CTL_REG_ETXSTL 0x104
+#define CTL_REG_ETXSTH 0x105
+#define CTL_REG_ETXNDL 0x106
+#define CTL_REG_ETXNDH 0x107
+#define CTL_REG_ERXSTL 0x108
+#define CTL_REG_ERXSTH 0x109
+#define CTL_REG_ERXNDL 0x10A
+#define CTL_REG_ERXNDH 0x10B
+#define CTL_REG_ERXRDPTL 0x10C
+#define CTL_REG_ERXRDPTH 0x10D
+#define CTL_REG_ERXWRPTL 0x10E
+#define CTL_REG_ERXWRPTH 0x10F
+#define CTL_REG_EDMASTL 0x110
+#define CTL_REG_EDMASTH 0x111
+#define CTL_REG_EDMANDL 0x112
+#define CTL_REG_EDMANDH 0x113
+#define CTL_REG_EDMADSTL 0x114
+#define CTL_REG_EDMADSTH 0x115
+#define CTL_REG_EDMACSL 0x116
+#define CTL_REG_EDMACSH 0x117
+
+/* Control Registers accessible in Bank 1 */
+#define CTL_REG_EHT0 0x200
+#define CTL_REG_EHT1 0x201
+#define CTL_REG_EHT2 0x202
+#define CTL_REG_EHT3 0x203
+#define CTL_REG_EHT4 0x204
+#define CTL_REG_EHT5 0x205
+#define CTL_REG_EHT6 0x206
+#define CTL_REG_EHT7 0x207
+#define CTL_REG_EPMM0 0x208
+#define CTL_REG_EPMM1 0x209
+#define CTL_REG_EPMM2 0x20A
+#define CTL_REG_EPMM3 0x20B
+#define CTL_REG_EPMM4 0x20C
+#define CTL_REG_EPMM5 0x20D
+#define CTL_REG_EPMM6 0x20E
+#define CTL_REG_EPMM7 0x20F
+#define CTL_REG_EPMCSL 0x210
+#define CTL_REG_EPMCSH 0x211
+#define CTL_REG_EPMOL 0x214
+#define CTL_REG_EPMOH 0x215
+#define CTL_REG_EWOLIE 0x216
+#define CTL_REG_EWOLIR 0x217
+#define CTL_REG_ERXFCON 0x218
+#define CTL_REG_EPKTCNT 0x219
+
+/* Control Registers accessible in Bank 2 */
+#define CTL_REG_MACON1 0x300
+#define CTL_REG_MACON2 0x301
+#define CTL_REG_MACON3 0x302
+#define CTL_REG_MACON4 0x303
+#define CTL_REG_MABBIPG 0x304
+#define CTL_REG_MAIPGL 0x306
+#define CTL_REG_MAIPGH 0x307
+#define CTL_REG_MACLCON1 0x308
+#define CTL_REG_MACLCON2 0x309
+#define CTL_REG_MAMXFLL 0x30A
+#define CTL_REG_MAMXFLH 0x30B
+#define CTL_REG_MAPHSUP 0x30D
+#define CTL_REG_MICON 0x311
+#define CTL_REG_MICMD 0x312
+#define CTL_REG_MIREGADR 0x314
+#define CTL_REG_MIWRL 0x316
+#define CTL_REG_MIWRH 0x317
+#define CTL_REG_MIRDL 0x318
+#define CTL_REG_MIRDH 0x319
+
+/* Control Registers accessible in Bank 3 */
+#define CTL_REG_MAADR1 0x400
+#define CTL_REG_MAADR0 0x401
+#define CTL_REG_MAADR3 0x402
+#define CTL_REG_MAADR2 0x403
+#define CTL_REG_MAADR5 0x404
+#define CTL_REG_MAADR4 0x405
+#define CTL_REG_EBSTSD 0x406
+#define CTL_REG_EBSTCON 0x407
+#define CTL_REG_EBSTCSL 0x408
+#define CTL_REG_EBSTCSH 0x409
+#define CTL_REG_MISTAT 0x40A
+#define CTL_REG_EREVID 0x412
+#define CTL_REG_ECOCON 0x415
+#define CTL_REG_EFLOCON 0x417
+#define CTL_REG_EPAUSL 0x418
+#define CTL_REG_EPAUSH 0x419
+
+/* PHY Register */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHSTAT1 0x01
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHSTAT2 0x11
+#define PHY_REG_PHLCON 0x14
+
+/* Receive Filter Register (ERXFCON) bits */
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/* ECON1 Register Bits */
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/* ECON2 Register Bits */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/* EIR Register Bits */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/* ESTAT Register Bits */
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/* EIE Register Bits */
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/* MACON1 Register Bits */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+/* MACON2 Register Bits */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/* MACON3 Register Bits */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/* MACON4 Register Bits */
+#define ENC_MACON4_DEFER 0x40
+
+/* MICMD Register Bits */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/* MISTAT Register Bits */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/* PHID1 and PHID2 values */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+/* PHCON1 values */
+#define ENC_PHCON1_PDPXMD 0x0100
+
+/* PHSTAT1 values */
+#define ENC_PHSTAT1_LLSTAT 0x0004
+
+/* PHSTAT2 values */
+#define ENC_PHSTAT2_LSTAT 0x0400
+#define ENC_PHSTAT2_DPXSTAT 0x0200
+
+#endif
diff --git a/include/netdev.h b/include/netdev.h
index 94eedfe..3ad16aa 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -54,6 +54,8 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int ethoc_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
--
1.5.6.5
More information about the U-Boot
mailing list