[U-Boot] [PATCH V2 2/7] Adding more control to physical address mapping

York Sun yorksun at freescale.com
Tue Sep 28 18:38:06 CEST 2010


A worker function __setup_ddr_tlbs() is introduced to implement more
control on physical address mapping.

Signed-off-by: York Sun <yorksun at freescale.com>
---
 arch/powerpc/cpu/mpc85xx/tlb.c |   16 ++++++++++------
 1 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index f2833a5..019fab7 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -245,7 +245,8 @@ void init_addr_map(void)
 }
 #endif
 
-unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
+unsigned int
+__setup_ddr_tlbs(phys_addr_t p_addr, unsigned int memsize_in_meg)
 {
 	int i;
 	unsigned int tlb_size;
@@ -275,21 +276,24 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
 
 		tlb_size = (camsize - 10) / 2;
 
-		set_tlb(1, ram_tlb_address, ram_tlb_address,
+		set_tlb(1, ram_tlb_address, p_addr,
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
 			0, ram_tlb_index, tlb_size, 1);
 
 		size -= 1ULL << camsize;
 		memsize -= 1ULL << camsize;
 		ram_tlb_address += 1UL << camsize;
+		p_addr += 1UL << camsize;
 	}
 
 	if (memsize)
 		print_size(memsize, " left unmapped\n");
-
-	/*
-	 * Confirm that the requested amount of memory was mapped.
-	 */
 	return memsize_in_meg;
 }
+
+unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
+{
+	return
+		__setup_ddr_tlbs(CONFIG_SYS_DDR_SDRAM_BASE, memsize_in_meg);
+}
 #endif /* !CONFIG_NAND_SPL */
-- 
1.7.0.4




More information about the U-Boot mailing list