[U-Boot] [PATCH 1/3] OMAP3: Change some USB related MUX settings to values used by the kernel.

Alexander Holler holler at ahsoftware.de
Sat Apr 2 00:37:08 CEST 2011


Signed-off-by: Alexander Holler <holler at ahsoftware.de>
---
 board/ti/beagle/beagle.h |   27 ++++++++++++++-------------
 1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index b22b653..abb69e7 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -273,18 +273,18 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
 	MUX_VAL(CP(MCSPI1_CS2),		(IDIS | PTD | DIS | M4)) /*GPIO_176*/\
  /* USB EHCI (port 2) */\
-	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA2*/\
-	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA7*/\
-	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA4*/\
-	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA5*/\
-	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA6*/\
-	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA3*/\
-	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\
-	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\
-	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DIR*/\
-	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_NXT*/\
-	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA0*/\
-	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA1*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA2*/\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA7*/\
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA4*/\
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA5*/\
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA6*/\
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA3*/\
+	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DIR*/\
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_NXT*/\
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA0*/\
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA1*/\
  /*Control and debug */\
 	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /*SYS_32K*/\
 	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
@@ -383,7 +383,8 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_141*/\
 	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
 	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
-	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/\
+	MUX_VAL(CP(UART2_RX),		(IDIS | PTU | EN  | M4)) /*GPIO_147*/
 
 #define MUX_BEAGLE_XM() \
 	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | EN  | M4)) /*GPIO_56*/\
-- 
1.7.3.4



More information about the U-Boot mailing list