April 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Apr 1 00:27:12 CEST 2011
Ending: Sat Apr 30 23:32:55 CEST 2011
Messages: 2282

• [PATCH] xilinx_emaclite.c ping-pong fix   =3D?UTF-8?q?Alain=3D20P=3DC3=3DA9teut?=3D
• [PATCH] xilinx_emaclite.c: Ping/Pong fixes   =3D?UTF-8?q?Alain=3D20P=3DC3=3DA9teut?=3D
• [U-Boot] [PATCH] mpc83xx fdt: do not adjust clock frequency of external UARTs   "David Müller (ELSOFT AG)"
• [U-Boot] [PATCH] mpc83xx fdt: do not adjust clock frequency of external UARTs   "David Müller (ELSOFT AG)"
• [U-Boot] [STATUS] U-Boot v2011.03 released - Merge Window OPEN   Albert ARIBAUD
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Albert ARIBAUD
• [U-Boot] [PATCH v4 01/23] powerpc, mpc83xx: add missing functions to include/common.h   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/4] Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: fix nand_spl   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: fix nand_spl   Albert ARIBAUD
• [U-Boot] [PATCH] MX25: tx25: Add _end section on nand_spl   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Albert ARIBAUD
• [U-Boot] I will be changing my U-Boot-related e-mail address today   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Albert ARIBAUD
• [U-Boot] [RFC] skip area in flash/memory commands (cp, cmp, ...)   Albert ARIBAUD
• [U-Boot] [PATCHv2 0/4] ST-Ericsson U8500 support   Albert ARIBAUD
• [U-Boot] [PATCH] Do not copy to same address   Albert ARIBAUD
• [U-Boot] [PATCHv3 2/4] armv7: Add ST-Ericsson u8500 arch   Albert ARIBAUD
• [U-Boot] [PATCH] Do not copy to same address   Albert ARIBAUD
• [U-Boot] [PATCH] cfi_flash driver: fixed addressing for 8-bit flash buses.   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] Rename openrd_base files to openrd.   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate   Albert ARIBAUD
• [U-Boot] Pull request u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support   Albert ARIBAUD
• [U-Boot] [PATCH V4] arm: Tegra2: add support for A9 CPU init   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] arm: Tegra2: Add missing PLLX init   Albert ARIBAUD
• [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Albert ARIBAUD
• [U-Boot] [PATCH V4] arm: Tegra2: add support for A9 CPU init   Albert ARIBAUD
• [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality   Albert ARIBAUD
• [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Albert ARIBAUD
• [U-Boot] RFC: How use same interface between arm926ejs/at91 and arm920t/at91   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Albert ARIBAUD
• [U-Boot] [PATCH 1/1] at91: reworked support for meesc board   Albert ARIBAUD
• [U-Boot] [RFC] Centralise documentation of CONFIG_ options (and finding unused ones)   Albert ARIBAUD
• [U-Boot] [PATCH] Do not copy to same address   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Albert ARIBAUD
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/2] ftpmu010: fix relocation and enhance features   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] ftpmu010.h: add asm support used by lowlevel_init   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/2] fttmr010: move fttmr010 header to include/faraday   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] a320evb: fix include path of timer fttmr010   Albert ARIBAUD
• [U-Boot] [arm] a320evb related fix   Albert ARIBAUD
• [U-Boot] [PATCH V1 1/1] MX5: Keep L2 cache enabled before jump to kernel   Albert ARIBAUD
• [U-Boot] [PATCH 0/6] TFTP server   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Tegra2: Fix out of tree builds   Albert ARIBAUD
• [U-Boot] [PATCH V2 0/3] Fix hang when loading U-Boot from SPI or NAND   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/3] ARM: MX31: Fix file name label   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/3] ARM: MX31: Fix file name label   Albert ARIBAUD
• [U-Boot] [PATCH v4 3/3] MX31: mx31pdk: Print the cause of reset   Albert ARIBAUD
• [U-Boot] [PATCH] Replace obsolete e-mail address   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd   Albert ARIBAUD
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Albert ARIBAUD
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/4] Add DIG297 board and OMAP3 fixes   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] cpuat91: fix board support   Albert ARIBAUD
• [U-Boot] [PATCH 2/3] cpu9260: update board support   Albert ARIBAUD
• [U-Boot] [PATCH] xilinx_emaclite.c ping-pong macro names   Albert ARIBAUD
• [U-Boot] [PATCH V1 1/1] MX5: Keep L2 cache enabled before jump to kernel   Albert ARIBAUD
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Albert ARIBAUD
• [U-Boot] Question about relocation   Albert ARIBAUD
• [U-Boot] Question about relocation   Albert ARIBAUD
• [U-Boot] Question about relocation   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] ARM: don't panic if no flash is there   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH V5] arm: Tegra2: add support for A9 CPU init   Albert ARIBAUD
• [U-Boot] How does u-boot know where to put its start code?   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: fix stack pointer adjustment in board_init_f()   Albert ARIBAUD
• [U-Boot] [PATCH V2 0/3] Fix hang when loading U-Boot from SPI or NAND   Albert ARIBAUD
• [U-Boot] How does u-boot know where to put its start code?   Albert ARIBAUD
• [U-Boot] Update and Cut down mach types   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Update and Cut down mach types   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH] Fix the issue of _end symbol not being found while building   Albert ARIBAUD
• [U-Boot] [PATCH v5] MX31: Introduce get_reset_cause()   Albert ARIBAUD
• [U-Boot] [PATCH V2 0/3] Fix hang when loading U-Boot from SPI or NAND   Albert ARIBAUD
• [U-Boot] Fix for overlapping sections?   Albert ARIBAUD
• [U-Boot] RFC: getramsize() prototype and volatile qualifier   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Albert ARIBAUD
• [U-Boot] Update and Cut down mach types   Albert ARIBAUD
• [U-Boot] RFC: getramsize() prototype and volatile qualifier   Albert ARIBAUD
• [U-Boot] RFC: getramsize() prototype and volatile qualifier   Albert ARIBAUD
• [U-Boot] Policy for checkpatch usage?   Albert ARIBAUD
• [U-Boot] How does u-boot know where to put its start code?   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx -- all ARM custodians please read   Albert ARIBAUD
• [U-Boot] [PATCH 2/3] cpu9260: update board support   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/4] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/4] ftsdmc021: add register definitions of ftsdmc021   Albert ARIBAUD
• [U-Boot] [PATCH v3 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] cpuat91: fix board support   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] nhk8815: remove platform.S, which was unused at link time   Albert ARIBAUD
• [U-Boot] [PATCH 2/3 V2] nhk8815: add support for relocation   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] nhk8815: move config targets from Makefile to boards.cfg   Albert ARIBAUD
• [U-Boot] [PATCH] Update and cut down mach types   Albert ARIBAUD
• [U-Boot] [PATCH 6/9] ARM: Implement CONFIG_SKIP_LOWLEVEL_INIT for arm926ej-s   Albert ARIBAUD
• [U-Boot] [PATCH v3] Don't grab memory for LCD if FB address is defined   Albert ARIBAUD
• [U-Boot] Update and Cut down mach types   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] arm: a320: fix compile error caused by commit 00d10eb   Albert ARIBAUD
• [U-Boot] [PATCH 6/6] Add CONFIG_OF_LIBFDT to more boards.   Albert ARIBAUD
• [U-Boot] [PATCH] arm: a320: fix compile error caused by commit 00d10eb   Albert ARIBAUD
• [U-Boot] [PATCH 6/6] Add CONFIG_OF_LIBFDT to more boards.   Albert ARIBAUD
• [U-Boot] [PATCHv3 0/4] ST-Ericsson U8500 support   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Away from the list from Apr 29th to May 2nd inclusive   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] HELLO   Anita Abdul
• [U-Boot] [STATUS] U-Boot v2011.03 released - Merge Window OPEN   Clint Adams
• [U-Boot] [PATCH 1/2] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH 2/2] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Clint Adams
• [U-Boot] [PATCH v2 1/4] Kirkwood: Rename openrd_base board files to openrd.   Clint Adams
• [U-Boot] [PATCH 1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH 2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Clint Adams
• [U-Boot] [PATCH 3/3] Rename openrd_base files to openrd.   Clint Adams
• [U-Boot] [PATCH 2/2] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Clint Adams
• [U-Boot] [PATCH 1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH 2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Clint Adams
• [U-Boot] [PATCH 3/3] Rename openrd_base files to openrd.   Clint Adams
• [U-Boot] [PATCH 2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Clint Adams
• [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support   Clint Adams
• [U-Boot] [V1 1/3] Rename openrd_base files to openrd   Clint Adams
• [U-Boot] [V1 2/3] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [V1 3/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] MV SDIO   Clint Adams
• [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support   Clint Adams
• [U-Boot] [PATCH v2 0/4] support for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v2 1/4] Rename openrd_base files to openrd   Clint Adams
• [U-Boot] [PATCH v2 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v2 3/4] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v2 4/4] Enable multiple fs options for Marvell SoC family on OpenRD boards   Clint Adams
• [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support   Clint Adams
• [U-Boot] [PATCH v3 0/4] support for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v3 1/4] Rename openrd_base files to openrd   Clint Adams
• [U-Boot] [PATCH v3 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v3 3/4] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v3 4/4] Enable multiple fs options for Marvell SoC family on OpenRD boards   Clint Adams
• [U-Boot] [PATCH v4 0/4] OpenRD-Client and OpenRD-Ultimate support   Clint Adams
• [U-Boot] [PATCH v4 1/4] Rename openrd_base files to openrd   Clint Adams
• [U-Boot] [PATCH v4 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v4 3/4] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] [PATCH v4 4/4] Enable multiple fs options for Marvell SoC family on OpenRD boards   Clint Adams
• [U-Boot] [PATCH v2 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate   Clint Adams
• [U-Boot] (no subject)   E-Mail Admin
• [U-Boot] Webmail Quote The Set-Limit überschritten   System Administrator
• [U-Boot] Six Zero's Invertment   Andrew Akinson
• [U-Boot] [PATCH] nand_spl: Fix large page nand_command()   Alex
• [U-Boot] TFTP - check for len == 0 before storing   David Andrey
• [U-Boot] [PATCH] Replace obsolete e-mail address   Albert Aribaud
• [U-Boot] (no subject)   MONDAY LOTTERY BOARD
• [U-Boot] (no subject)   MONDAY LOTTERY BOARD
• [U-Boot] [PATCH v2] MX5: Enable flat-device-tree support on mx53 loco board   Stefano Babic
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: fix nand_spl   Stefano Babic
• [U-Boot] [PATCH] MX35: Added bootcounter to mx35   Stefano Babic
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: fix nand_spl   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] arm imx35 timer failure   Stefano Babic
• [U-Boot] [PATCH 1/6] Davinci: ea20: set console on UART0   Stefano Babic
• [U-Boot] [PATCH 2/6] Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console   Stefano Babic
• [U-Boot] [PATCH 3/6] Davinci: ea20: Add NAND support   Stefano Babic
• [U-Boot] [PATCH 4/6] Davinci: ea20: Add early init to get early output from console   Stefano Babic
• [U-Boot] [PATCH 5/6] Davinci: ea20: Add default U-Boot environment   Stefano Babic
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Stefano Babic
• [U-Boot] [PATCH] fsl_esdhc: Deal with watermark level register related changes   Stefano Babic
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: Add watchdog support   Stefano Babic
• [U-Boot] [PATCH 3/6] Davinci: ea20: Add NAND support   Stefano Babic
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Stefano Babic
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Stefano Babic
• [U-Boot] [PATCH V1 1/1] MX5: Keep L2 cache enabled before jump to kernel   Stefano Babic
• [U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board   Stefano Babic
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Stefano Babic
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Stefano Babic
• [U-Boot] [PATCH v3 2/3] MX31: Introduce get_reset_cause()   Stefano Babic
• [U-Boot] [PATCH V3 1/2] MX5: factor out boot cause funciton to common code   Stefano Babic
• [U-Boot] [PATCH V3 1/2] MX5: factor out boot cause funciton to common code   Stefano Babic
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Stefano Babic
• [U-Boot] [PATCH] MX31: drop warnings in get_cpu_rev   Stefano Babic
• [U-Boot] [PATCH 1/1] mx5: drop boot cause code from board support code   Stefano Babic
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Stefano Babic
• [U-Boot] [PATCH v4 1/3] ARM: MX31: Fix file name label   Stefano Babic
• [U-Boot] [PATCH V5 1/2] MX5: factor out boot cause funciton to common code   Stefano Babic
• [U-Boot] [PATCH] MX31: drop warnings in get_cpu_rev   Stefano Babic
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Stefano Babic
• [U-Boot] [PATCH 1/1] mx5: drop boot cause code from board support code   Stefano Babic
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Stefano Babic
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Stefano Babic
• [U-Boot] [PATCH] MX31: removed warning due to missing prototype   Stefano Babic
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: Add watchdog support   Stefano Babic
• [U-Boot] [PATCH] gpio: imx: Fix return value on error   Stefano Babic
• [U-Boot] [PATCH] MX53: Handle silicon revision 2.1 case   Stefano Babic
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Stefano Babic
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Stefano Babic
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Stefano Babic
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Stefano Babic
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Stefano Babic
• [U-Boot] [PATCH] MX31: change return value of get_cpu_rev   Stefano Babic
• [U-Boot] [PATCH] MX31: change return value of get_cpu_rev   Stefano Babic
• [U-Boot] [PATCH V2] MX31: change return value of get_cpu_rev   Stefano Babic
• [U-Boot] OPEN THE ATTACHMENT AND READ YOUR LETTER   South African Reserve Bank
• [U-Boot] env: fix env var autocompletion   Peter Barada
• [U-Boot] mmcinit in U-Boot   Valerio Bardelli
• [U-Boot] Pull request: u-boot-fdt   Gerald Van Baren
• [U-Boot] Pull request: u-boot-fdt   Gerald Van Baren
• [U-Boot] [PATCH 1/6] Stop passing around bootmem_base value.   Jerry Van Baren
• [U-Boot] [PATCHv2] fdt_support: Fix buffer overflow in fdt_fixup_memory_banks   Jerry Van Baren
• [U-Boot] [PATCH 2/6] Default to bootm_size() when CONFIG_SYS_BOOTMAPSZ is not defined   Jerry Van Baren
• [U-Boot] Please pull u-boot-mpc85xx.git   Jerry Van Baren
• [U-Boot] Daughter card detection   Jerry Van Baren
• [U-Boot] The forbidden value in omap3-common timer.c code   Bedia, Vaibhav
• [U-Boot] [beagleboard] [PATCH] BeagleBoard: fixed typo in typecast   Dirk Behme
• [U-Boot] CLAIMS CONTACT @ fedextodaydelivery0385 at hotmail.com..   Hedman Bertil
• [U-Boot] RE   Hedman Bertil
• [U-Boot] U-boot, question   Stanislav Bezzubtcev
• [U-Boot] [PATCH ATMEL REWORK][V3] update arm/at91rm9200 work with rework rework110202   Andreas Bießmann
• [U-Boot] RFC: How use same interface between arm926ejs/at91 and arm920t/at91   Andreas Bießmann
• [U-Boot] [PATCH 00/15] [REWORK AVR32/AT91] additional changes for avr32   Andreas Bießmann
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Andreas Bießmann
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Andreas Bießmann
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Andreas Bießmann
• [U-Boot] [PATCH 01/15] AT91: rework at91sam9260.h   Andreas Bießmann
• [U-Boot] [PATCH 3/4] at91sam9261/g10: support relocation   Andreas Bießmann
• [U-Boot] [PATCH 00/15] [REWORK AVR32/AT91] additional changes for avr32   Andreas Bießmann
• [U-Boot] [PATCH V2 00/15] *** SUBJECT HERE ***   Andreas Bießmann
• [U-Boot] [PATCH V2 01/15] avr32/config.mk: simplify PLATFORM_RELFLAGS   Andreas Bießmann
• [U-Boot] [PATCH V2 02/15] avr32: use single linker script   Andreas Bießmann
• [U-Boot] [PATCH V2 03/15] atngw100: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 04/15] atstk1002: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 05/15] atstk1003: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 06/15] atstk1004: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 07/15] atstk1006: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 08/15] favr-32-ezkit: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 09/15] hammerhead: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 10/15] mimc200: fix "#define XXXX 1"   Andreas Bießmann
• [U-Boot] [PATCH V2 11/15] atngw100: move CONFIG_SYS_TEXT_BASE to header   Andreas Bießmann
• [U-Boot] [PATCH V2 12/15] atstk100x: move CONFIG_SYS_TEXT_BASE to header   Andreas Bießmann
• [U-Boot] [PATCH V2 13/15] favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header   Andreas Bießmann
• [U-Boot] [PATCH V2 14/15] mimc200: move CONFIG_SYS_TEXT_BASE to header   Andreas Bießmann
• [U-Boot] [PATCH V2 15/15] hammerhead: move CONFIG_SYS_TEXT_BASE to header   Andreas Bießmann
• [U-Boot] [PATCH 00/15] [REWORK AVR32/AT91] additional changes for avr32   Andreas Bießmann
• [U-Boot] u-boot and 2nd level usb hub   Kallol Biswas
• [U-Boot] u-boot and 2nd level usb hub   Kallol Biswas
• [U-Boot] [PATCH 0/5] introduce nand write.ubi, and drop ffs for jffs2 too   Artem Bityutskiy
• [U-Boot] Winner   Honda Car Board
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Remy Bohmer
• [U-Boot] Cloud Server雲端伺服器   Boris
• [U-Boot] [0/6] Patch serie UBI min I/O size fixes   Holger Brunck
• [U-Boot] U-Boot Digest, Vol 35, Issue 28   ByteLee
• [U-Boot] [PATCH 1/3] mp2usb: remove board support   Eric Bénard
• [U-Boot] [PATCH 2/3] cpu9260: update board support   Eric Bénard
• [U-Boot] [PATCH 3/3] cpuat91: fix board support   Eric Bénard
• [U-Boot] [PATCH 2/2] cpu9260: update board support   Eric Bénard
• [U-Boot] [PATCH 3/3] cpuat91: fix board support   Eric Bénard
• [U-Boot] [PATCH 2/3] cpu9260: update board support   Eric Bénard
• [U-Boot] [PATCH 1/3] mp2usb: remove board support   Eric Bénard
• [U-Boot] [PATCH] mp2usb: finish the removal   Eric Bénard
• [U-Boot] repurposing uboot's console UART after booting   CAIannello
• [U-Boot] Batch number--CT 091026XN   ICC CRICKET
• [U-Boot] Please pull u-boot-mpc85xx.git   Fabian Cenedese
• [U-Boot] get ram size/end in env var   Fabian Cenedese
• [U-Boot] Policy for checkpatch usage?   Fabian Cenedese
• [U-Boot] [PATCH v3 0/4] Add DIG297 board and OMAP3 fixes   Luca Ceresoli
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [PATCH] tools/env: document current cross-compilation issues and workaround   Luca Ceresoli
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [RFC] Act as a TFTP server   Luca Ceresoli
• [U-Boot] [RFC] Act as a TFTP server   Luca Ceresoli
• [U-Boot] [RFC] Act as a TFTP server   Luca Ceresoli
• [U-Boot] [PATCH 0/6] TFTP server   Luca Ceresoli
• [U-Boot] [PATCH 1/6] README: remove spurious line   Luca Ceresoli
• [U-Boot] [PATCH 2/6] NET: pass source IP address to packet handlers   Luca Ceresoli
• [U-Boot] [PATCH 3/6] TFTP: rename "server" to "remote"   Luca Ceresoli
• [U-Boot] [PATCH 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ   Luca Ceresoli
• [U-Boot] [PATCH 5/6] TFTP: net/tftp.c: add server mode receive   Luca Ceresoli
• [U-Boot] [PATCH 6/6] TFTP: add tftpsrv command   Luca Ceresoli
• [U-Boot] [PATCH 0/4] Add DIG297 board and OMAP3 fixes   Luca Ceresoli
• [U-Boot] [PATCH 1/4] ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX   Luca Ceresoli
• [U-Boot] [PATCH 2/4] ARMV7: OMAP3: Cleanup extern variables in mem.c   Luca Ceresoli
• [U-Boot] [PATCH 3/4] ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions   Luca Ceresoli
• [U-Boot] [PATCH 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [PATCH v4 0/4] Add DIG297 board and OMAP3 fixes   Luca Ceresoli
• [U-Boot] [PATCH v4 1/4] ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX   Luca Ceresoli
• [U-Boot] [PATCH v4 2/4] ARMV7: OMAP3: Cleanup extern variables in mem.c   Luca Ceresoli
• [U-Boot] [PATCH v4 3/4] ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions   Luca Ceresoli
• [U-Boot] [PATCH v4 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [PATCH v2 0/6] TFTP server   Luca Ceresoli
• [U-Boot] [PATCH v2 1/6] README: remove spurious line   Luca Ceresoli
• [U-Boot] [PATCH v2 2/6] NET: pass source IP address to packet handlers   Luca Ceresoli
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Luca Ceresoli
• [U-Boot] [PATCH v2 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ   Luca Ceresoli
• [U-Boot] [PATCH v2 5/6] TFTP: net/tftp.c: add server mode receive   Luca Ceresoli
• [U-Boot] [PATCH v2 6/6] TFTP: add tftpsrv command   Luca Ceresoli
• [U-Boot] [PATCH v4 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [PATCH v2 2/6] NET: pass source IP address to packet handlers   Luca Ceresoli
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Luca Ceresoli
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Luca Ceresoli
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Luca Ceresoli
• [U-Boot] [PATCH v5 0/2] Add DIG297 board and OMAP3 fixes   Luca Ceresoli
• [U-Boot] [PATCH v5 1/2] ARMV7: OMAP3: Cleanup extern variables in mem.c   Luca Ceresoli
• [U-Boot] [PATCH v5 2/2] ARMV7: OMAP3: Add support for Comelit DIG297 board   Luca Ceresoli
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Chih-Min Chao
• [U-Boot] Modify u-boot to let 8315 PCIe run in EP model   Yang Chaolin
• [U-Boot] [PATCH] ehci-pci: Fix PCI EHCI driver for 36-bit   Zhao Chenhui
• [U-Boot] [PATCH] Fix variable flavor in examples/standalone/Makefile   Che-liang Chiou
• [U-Boot] [PATCH v4] spi: add new driver for OpenCores tiny_spi   Thomas Chou
• [U-Boot] [PATCH] nios2: Make STANDALONE_LOAD_ADDR configurable per board   Thomas Chou
• [U-Boot] [PATCH] mmc_spi: add mmc_init call   Thomas Chou
• [U-Boot] [PATCH 1/2] mmc: coding style fix and tabify of mmc.h   Thomas Chou
• [U-Boot] [PATCH 2/2] mmc_spi: generate response for send status command   Thomas Chou
• [U-Boot] [PATCH v3 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd   Po-Yu Chuang
• [U-Boot] [PATCH v3 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd   Po-Yu Chuang
• [U-Boot] [PATCH] arm: a320: fix compile error caused by commit 00d10eb   Po-Yu Chuang
• [U-Boot] Fix for overlapping sections?   Ciummo, Larry (DS-1)
• [U-Boot] Good news   The Honda Car Company
• [U-Boot] [PATCH] ARM: fix stack pointer adjustment in board_init_f()   Eric Cooper
• [U-Boot] problem running u-boot from RAM   Eric Cooper
• [U-Boot] problem running u-boot from RAM   Eric Cooper
• [U-Boot] Policy for checkpatch usage?   Eric Cooper
• [U-Boot] Policy for checkpatch usage?   Eric Cooper
• [U-Boot] repurposing uboot's console UART after booting   Eric Cooper
• [U-Boot] boot-up time optimization. Where to start?   Eric Cooper
• [U-Boot] smdk2416 board support   Thiago A. Corrêa
• [U-Boot] ATM pin is 822   ATM CARD DEPARTMENT
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Rogan Dawes
• [U-Boot] How does u-boot know where to put its start code?   Rogan Dawes
• [U-Boot] How does u-boot know where to put its start code?   Rogan Dawes
• [U-Boot] How does u-boot know where to put its start code?   Rogan Dawes
• [U-Boot] How does u-boot know where to put its start code?   Rogan Dawes
• [U-Boot] [PATCH 10/11] Copy the ramdisk from flash for the DNS323   Rogan Dawes
• [U-Boot] Important: Database Maintenance Update ! ! !   Karen Denham
• [U-Boot] Saving environment question   Wolfgang Denk
• [U-Boot] how does Linux call the function from u-boot?   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] mpq101 board broken   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Implementation of a auto-update hash-check- if image has new hash, update flash, otherwise boot device immediately   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Implementation of a bootloader area protection during auto-update (new CONFIG_SYSTEM_START_ADDR necessary)   Wolfgang Denk
• [U-Boot] [PATCH] Provide pr_debug() and pr_info().   Wolfgang Denk
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Wolfgang Denk
• [U-Boot] [STATUS] U-Boot v2011.03 released - Merge Window OPEN   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] [PATCH v4 03/23] keymile: Fix Coding style issues for keymile boards.   Wolfgang Denk
• [U-Boot] [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor.   Wolfgang Denk
• [U-Boot] [PATCH v2] common: add a grepenv command   Wolfgang Denk
• [U-Boot] [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor.   Wolfgang Denk
• [U-Boot] Searching for JFFS2 understanding.   Wolfgang Denk
• [U-Boot] [PATCH V6 2/5] mv_i2c: use structure to replace the direclty define   Wolfgang Denk
• [U-Boot] [PATCH V7 2/5] mv_i2c: use structure to replace the direclty define   Wolfgang Denk
• [U-Boot] mpq101 board broken   Wolfgang Denk
• [U-Boot] [STATUS] U-Boot v2011.03 released - Merge Window OPEN   Wolfgang Denk
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Wolfgang Denk
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH v3] common: add a grepenv command   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] [GIT PULL] MIPS patches   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Wolfgang Denk
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Wolfgang Denk
• [U-Boot] Where can i get this patch ??   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/qoriq: Update USB mode device tree fixup   Wolfgang Denk
• [U-Boot] [PATCH v3 3/4] ARMV7: OMAP3: boot_flash_env_addr should not be volatile   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Wolfgang Denk
• [U-Boot] cannot ping from IMX53QSB   Wolfgang Denk
• [U-Boot] CONFIG_SILENT_CONSOLE not working with NAND env   Wolfgang Denk
• [U-Boot] [u-boot] why many init func moved to board_init_f and whereis the changelog   Wolfgang Denk
• [U-Boot] [PATCH 1/2] NS16550: buffer reads   Wolfgang Denk
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Wolfgang Denk
• [U-Boot] [PATCH] Handle most LDSCRIPT setting centrally   Wolfgang Denk
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Wolfgang Denk
• [U-Boot] [PATCH 01/13] add XScale sub architecture (IXP/PXA) to board list   Wolfgang Denk
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Wolfgang Denk
• [U-Boot] DM9000 on 2011.03   Wolfgang Denk
• [U-Boot] [PATCH v3 5/8] Create PHY Lib for U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Wolfgang Denk
• [U-Boot] [PATCH 6/6] powerpc/85xx: Add SHARP LQ084S3LG01 LCD support on P1022DS   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [Nios] Pull Request   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH 1/1] fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2   Wolfgang Denk
• [U-Boot] [PATCH v2] ARM: mx31: Print the silicon version   Wolfgang Denk
• [U-Boot] [PATCHv2 1/4] p101x: extra init for u8500   Wolfgang Denk
• [U-Boot] [PATCH 2/4] armv7: Add ST-Ericsson u8500 arch   Wolfgang Denk
• [U-Boot] [PATCHv2 4/4] armv7: Add support for ST-Ericsson U8500 href platform   Wolfgang Denk
• [U-Boot] [PATCH 01/21] Define new system_restart() and emergency_restart()   Wolfgang Denk
• [U-Boot] [PATCH 1/4] sf: unify read/write helpers   Wolfgang Denk
• [U-Boot] [PATCH 2/4] sf: unify status polling for ready bit   Wolfgang Denk
• [U-Boot] [PATCH 3/4] sf: unify erase functions   Wolfgang Denk
• [U-Boot] [PATCH 4/4] sf: unify read functions   Wolfgang Denk
• [U-Boot] [U-BOOT] [PATCH V2] bootm: replace blob_start with image_start   Wolfgang Denk
• [U-Boot] [PATCH v3] Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS   Wolfgang Denk
• [U-Boot] [PATCH V3] update VCMA9 port   Wolfgang Denk
• [U-Boot] [PATCH 1/2] ea20: fix libea20.o not found   Wolfgang Denk
• [U-Boot] [PATCH 2/2] ea20: fix undefined PHY_* errors   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Add support for -msingle-pic-base   Wolfgang Denk
• [U-Boot] [PATCH v3] spi: add new driver for OpenCores tiny_spi   Wolfgang Denk
• [U-Boot] [PATCH V2] Do not copy elf section to same adress   Wolfgang Denk
• [U-Boot] [PATCH v2] Net: Add Intel E1000 82574L PCIe card support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Makefile: change rule to build IMX image   Wolfgang Denk
• [U-Boot] [PATCH 1/2] cmd_ide: enhance new feature "CONFIG_IDE_AHB"   Wolfgang Denk
• [U-Boot] [PATCH 2/2] ftide020: add faraday ide ahb controller from Linux kernel   Wolfgang Denk
• [U-Boot] [PATCH] arm, keymile: remove unneeded code   Wolfgang Denk
• [U-Boot] [PATCH] ppc, mgcoge: add DIP switch detection   Wolfgang Denk
• [U-Boot] [PATCH 1/2] mp2usb: remove board support   Wolfgang Denk
• [U-Boot] [PATCH v4] ftwdt010_wdt: support faraday ftwdt010 watchdog   Wolfgang Denk
• [U-Boot] [PATCH] STx AMC8548: initial support for Silicon Turnkey Express AMC8548 board   Wolfgang Denk
• [U-Boot] [RFC] skip area in flash/memory commands (cp, cmp, ...)   Wolfgang Denk
• [U-Boot] [PATCH V2] Do not copy elf section to same adress   Wolfgang Denk
• [U-Boot] trigger automatic update (FIT image) from prompt instead of "updatefile" env variable   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Wolfgang Denk
• [U-Boot] [PATCH 3/6] Env and lds file clean up for ColdFire M5445x and M547x/8x boards.   Wolfgang Denk
• [U-Boot] [PATCH 2/6] Fix the CPP flags for toolchain 4.4.1 on ColdFire boards.   Wolfgang Denk
• [U-Boot] [PATCH 5/6] Enable the dm9000 on ColdFire 5253DEMO board.   Wolfgang Denk
• [U-Boot] [PATCH V4 4/4] VCMA9: various cleanups/code style fixes   Wolfgang Denk
• [U-Boot] [PATCH V4 1/4] VCMA9: activate ARM relocation feature   Wolfgang Denk
• [U-Boot] [PATCH V4 1/4] VCMA9: activate ARM relocation feature   Wolfgang Denk
• [U-Boot] [RFC] skip area in flash/memory commands (cp, cmp, ...)   Wolfgang Denk
• [U-Boot] [PATCH] powerpc: fix LDSCRIPT in NAND boot   Wolfgang Denk
• [U-Boot] [PATCH] mvgbe: enable the reception of packets with an odd number of preamble nibbles   Wolfgang Denk
• [U-Boot] [PATCH 1/1] Fix min/max macros in include/common.h   Wolfgang Denk
• [U-Boot] [PATCH] Fix gunzip to work for any gzipped uImage size Signed-off-by: Catalin Radu <Catalin at VirtualMetrix.com>   Wolfgang Denk
• [U-Boot] [PATCH] Fix gunzip to work for any gzipped uImage size Signed-off-by: Catalin Radu <Catalin at VirtualMetrix.com>   Wolfgang Denk
• [U-Boot] [PATCH] Fix gunzip to work for any gziped uImage size   Wolfgang Denk
• [U-Boot] [PATCH] Fix bad padding of bootp request packet   Wolfgang Denk
• [U-Boot] [PATCH V3] Fix misc spelling errors found by lintian   Wolfgang Denk
• [U-Boot] [PATCH] Drop config.h include in tools/imximage.h   Wolfgang Denk
• [U-Boot] [PATCH] [NEXT] Make STANDALONE_LOAD_ADDR configurable per board   Wolfgang Denk
• [U-Boot] [PATCH] Only build fw_printenv if we have mtd/mtd-user.h   Wolfgang Denk
• [U-Boot] [U-BOOT] [PATCH] mmc: enable switch partition function   Wolfgang Denk
• [U-Boot] [PATCH 1/3] cmd_nvedit: use explicit typecast for printf   Wolfgang Denk
• [U-Boot] [PATCH 3/3] common/cmd_bdinfo.c: fix do_bdinfo() for AVR32   Wolfgang Denk
• [U-Boot] [PATCH 0/3] Get AVR32 boards working with partial linking   Wolfgang Denk
• [U-Boot] [PATCH v4] ftwdt010_wdt: support faraday ftwdt010 watchdog   Wolfgang Denk
• [U-Boot] [PATCH] ftwdt010_wdt: move header to include/faraday and enhance   Wolfgang Denk
• [U-Boot] [PATCH 2/5] e1000: Restructure and streamline PCI device probing   Wolfgang Denk
• [U-Boot] [PATCH 4/5] e1000: New "e1000" commands for SPI EEPROM management   Wolfgang Denk
• [U-Boot] [PATCH 5/5] e1000: Add a small SPI driver wrapper around the EEPROM code   Wolfgang Denk
• [U-Boot] [PATCH v4] mkimage: add "-V" option to print version information   Wolfgang Denk
• [U-Boot] [PATCH] Add support for dataflash to U-boot environment settings tool.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] hush: Fix return code when using 'exit' in control structures   Wolfgang Denk
• [U-Boot] [PATCH] disk/part.c: fix potential stack overflow bug   Wolfgang Denk
• [U-Boot] [PATCH] powerpc: fix LDSCRIPT in NAND boot   Wolfgang Denk
• [U-Boot] [PATCH 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Wolfgang Denk
• [U-Boot] [PATCH 5/5] Allow tftp server to be different from bootp/dhcp server   Wolfgang Denk
• [U-Boot] [PATCH 4/5] Put common autoload code into AutoLoad() function   Wolfgang Denk
• [U-Boot] [PATCH 2/5] e1000: Restructure and streamline PCI device probing   Wolfgang Denk
• [U-Boot] [PATCH 4/5] e1000: New "e1000" commands for SPI EEPROM management   Wolfgang Denk
• [U-Boot] [PATCH 5/5] Allow tftp server to be different from bootp/dhcp server   Wolfgang Denk
• [U-Boot] [U-BOOT] [PATCH] mmc: enable switch partition function   Wolfgang Denk
• [U-Boot] [U-BOOT] [PATCH] mmc: enable switch partition function   Wolfgang Denk
• [U-Boot] [RFC] Act as a TFTP server   Wolfgang Denk
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Wolfgang Denk
• [U-Boot] [PATCH 5/5] Allow tftp server to be different from bootp/dhcp server   Wolfgang Denk
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Wolfgang Denk
• [U-Boot] [PATCH] cfi_flash: Fix CONFIG_SYS_FLASH_AUTOPROTECT_LIST usage   Wolfgang Denk
• [U-Boot] [x86] Pull request   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Wolfgang Denk
• [U-Boot] [PATCH] Fix bad padding of bootp request packet   Wolfgang Denk
• [U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board   Wolfgang Denk
• [U-Boot] [PATCH V2 1/1] MX53: support for freescale MX53LOCO board   Wolfgang Denk
• [U-Boot] [PATCH] MAINTAINERS: fix email address case   Wolfgang Denk
• [U-Boot] [PATCH] Fix variable flavor in examples/standalone/Makefile   Wolfgang Denk
• [U-Boot] [PATCHv2] fsl_ddr: Don't use full 64-bit divides on 32-bit PowerPC   Wolfgang Denk
• [U-Boot] [PATCH v3] fsl_ddr: Don't use full 64-bit divides on 32-bit PowerPC   Wolfgang Denk
• [U-Boot] [PATCHv2] powerpc: Minimal private libgcc to build on Debian   Wolfgang Denk
• [U-Boot] [PATCH] Env. vars fix for lite5200   Wolfgang Denk
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Wolfgang Denk
• [U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board   Wolfgang Denk
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Wolfgang Denk
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Wolfgang Denk
• [U-Boot] [PATCH] ARM: fix stack pointer adjustment in board_init_f()   Wolfgang Denk
• [U-Boot] is any bug in cp?   Wolfgang Denk
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Wolfgang Denk
• [U-Boot] is any bug in cp?   Wolfgang Denk
• [U-Boot] [PATCH] xilinx_emaclite.c ping-pong macro names   Wolfgang Denk
• [U-Boot] problem running u-boot from RAM   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ARM: don't panic if no flash is there   Wolfgang Denk
• [U-Boot] problem running u-boot from RAM   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ARM: don't panic if no flash is there   Wolfgang Denk
• [U-Boot] [PATCH v4 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Wolfgang Denk
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Wolfgang Denk
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Wolfgang Denk
• [U-Boot] [PATCH v3] omap3_beagle: enable the use of a plain text file named uEnv.txt instead of boot.scr   Wolfgang Denk
• [U-Boot] Update and Cut down mach types   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Wolfgang Denk
• [U-Boot] Fix for overlapping sections?   Wolfgang Denk
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Wolfgang Denk
• [U-Boot] Please pull u-boot-mmc.git   Wolfgang Denk
• [U-Boot] [i2c] Pull request   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Pull request: u-boot-fdt   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git (misc branch)   Wolfgang Denk
• [U-Boot] Please pull u-boot-mmc.git phylib   Wolfgang Denk
• [U-Boot] [PATCH] Add 'led' command   Wolfgang Denk
• [U-Boot] [PATCH] BeagleBoard: Added LED driver   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Add target EDOSK2674   Wolfgang Denk
• [U-Boot] [PATCH] tools/env: fix redundant env flag comparison   Wolfgang Denk
• [U-Boot] [PATCH V8 1/6] pxa: move i2c driver to the common place   Wolfgang Denk
• [U-Boot] [PATCH V2] Ethernut 5 board support   Wolfgang Denk
• [U-Boot] Policy for checkpatch usage?   Wolfgang Denk
• [U-Boot] Mainlining android fastboot support to upstream u-boot   Wolfgang Denk
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ARM: don't panic if no flash is there   Wolfgang Denk
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Wolfgang Denk
• [U-Boot] [PATCH v3 1/4] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Wolfgang Denk
• [U-Boot] Policy for checkpatch usage?   Wolfgang Denk
• [U-Boot] Mainlining android fastboot support to upstream u-boot   Wolfgang Denk
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Wolfgang Denk
• [U-Boot] Policy for checkpatch usage?   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/85xx: Change timebase divisor to be defined per processor   Wolfgang Denk
• [U-Boot] ubi command in u-boot   Wolfgang Denk
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Wolfgang Denk
• [U-Boot] ubi command in u-boot   Wolfgang Denk
• [U-Boot] repurposing uboot's console UART after booting   Wolfgang Denk
• [U-Boot] Mainlining android fastboot support to upstream u-boot   Wolfgang Denk
• [U-Boot] [PATCH] env: allow people to force envcrc building   Wolfgang Denk
• [U-Boot] [PATCH 0/3] Make 8xx build with -msingle-pic-base   Wolfgang Denk
• [U-Boot] [PATCH 0/3] Make 8xx build with -msingle-pic-base   Wolfgang Denk
• [U-Boot] [PATCH 3/3] powerpc, 8xx: adapt a few linker scripts so it will build.   Wolfgang Denk
• [U-Boot] [PATCH 1/3] powerpc, 8xx: Fix fallout from "Fixup all 8xx u-boot.lds scripts"   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash   Wolfgang Denk
• [U-Boot] [PATCH] powerpc:Enable compiler debug option for powerpc platforms   Wolfgang Denk
• [U-Boot] [PATCH v3] Don't grab memory for LCD if FB address is defined   Wolfgang Denk
• [U-Boot] [PATCH v3] Don't grab memory for LCD if FB address is defined   Wolfgang Denk
• [U-Boot] [RFC] ks8851_mll: add ethernet support   Wolfgang Denk
• [U-Boot] [PATCH 2/9] mvgbe: Support preserving the existing MAC address   Wolfgang Denk
• [U-Boot] [PATCH 5/9] ARM: Rename CONFIG_SKIP_LOWLEVEL_INIT to CONFIG_SKIP_CPU_INIT_CRIT   Wolfgang Denk
• [U-Boot] [PATCH 6/9] ARM: Implement CONFIG_SKIP_LOWLEVEL_INIT for arm926ej-s   Wolfgang Denk
• [U-Boot] [PATCH 7/9] Add board support for TS-7800   Wolfgang Denk
• [U-Boot] [PATCH 8/9] Add NAND support for TS-7800   Wolfgang Denk
• [U-Boot] [PATCH 9/9] Add README for TS-7800   Wolfgang Denk
• [U-Boot] [PATCH 3/3] powerpc, 8xx: adapt a few linker scripts so it will build.   Wolfgang Denk
• [U-Boot] [PATCH] powerpc:Enable compiler debug option for powerpc platforms   Wolfgang Denk
• [U-Boot] Mainlining android fastboot support to upstream u-boot   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Wolfgang Denk
• [U-Boot] [PATCH v2] andes_spi: add andes_spi interface   Wolfgang Denk
• [U-Boot] [PATCH] powerpc:Enable compiler debug option for powerpc platforms   Wolfgang Denk
• [U-Boot] [PATCH 3/3] powerpc, 8xx: adapt a few linker scripts so it will build.   Wolfgang Denk
• [U-Boot] Fix for overlapping sections?   Wolfgang Denk
• [U-Boot] How can I replace the Linux scrolling text during boot-up with a splash image?   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Wolfgang Denk
• [U-Boot] Renaming files on an SD card   Wolfgang Denk
• [U-Boot] punt duplicate 2009.01-rc2 tag   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Wolfgang Denk
• [U-Boot] [PATCH 02/11] IDE: Don't assume there are always two devices per bus   Wolfgang Denk
• [U-Boot] [PATCH 07/11] Allow setting CONFIG_NR_DRAM_BANKS to a larger value   Wolfgang Denk
• [U-Boot] [PATCH 09/11] Support passing a Marvell-specific ATAG   Wolfgang Denk
• [U-Boot] [PATCH 10/11] Copy the ramdisk from flash for the DNS323   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Wolfgang Denk
• [U-Boot] [PATCH v2 2/4] ftsdmc021: add register definitions of ftsdmc021   Wolfgang Denk
• [U-Boot] [PATCH] Fix typo in #error: IS_IN_NOWHERE vs. IS_NOWHERE   Wolfgang Denk
• [U-Boot] [PATCH v2 1/4] Rename openrd_base files to openrd   Wolfgang Denk
• [U-Boot] [PATCH v2 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate   Wolfgang Denk
• [U-Boot] [PATCH v2 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate   Wolfgang Denk
• [U-Boot] [PATCH v2 3/4] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate   Wolfgang Denk
• [U-Boot] [PATCH v2 4/4] Enable multiple fs options for Marvell SoC family on OpenRD boards   Wolfgang Denk
• [U-Boot] [Patch v2 1/2] rtc, rv3029: add trickle charger support.   Wolfgang Denk
• [U-Boot] [Patch v2 2/2] mpc52xx, digsy_mtc: add trickle charger support for rev5 boards.   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Wolfgang Denk
• [U-Boot] [PATCH] ehci.h: replace usb root support from 2 to 5   Wolfgang Denk
• [U-Boot] [PATCH 8/9] Add NAND support for TS-7800   Wolfgang Denk
• [U-Boot] [PATCH][v4] powerpc: eSPI and eSPI controller support   Wolfgang Denk
• [U-Boot] [PATCH v3 2/2] ftsdmc021: add register definitions of ftsdmc021   Wolfgang Denk
• [U-Boot] [PATCH v3 1/2] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller   Wolfgang Denk
• [U-Boot] [PATCH v4 2/2] ftsdmc021: add register definitions of ftsdmc021   Wolfgang Denk
• [U-Boot] bootpath of the u-boot   Wolfgang Denk
• [U-Boot] Update and Cut down mach types   Wolfgang Denk
• [U-Boot] Update and Cut down mach types   Wolfgang Denk
• [U-Boot] smdk2416 board support   Wolfgang Denk
• [U-Boot] [PATCH v4 03/23] keymile: Fix Coding style issues for keymile boards.   Wolfgang Denk
• [U-Boot] boot-up time optimization. Where to start?   Wolfgang Denk
• [U-Boot] boot-up time optimization. Where to start?   Wolfgang Denk
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git (spi branch)   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Pull request: u-boot-fdt   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mp2usb: remove board support   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] boot-up time optimization. Where to start?   Wolfgang Denk
• [U-Boot] mpq101 board broken   Wolfgang Denk
• [U-Boot] [PATCH 6/6] Add CONFIG_OF_LIBFDT to more boards.   Wolfgang Denk
• [U-Boot] [PATCH] fix redundant environment for serial flash   Wolfgang Denk
• [U-Boot] [PATCH] NET: Correct potential missing goto label in case statement.   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mpc52xx, digsy_mtc: change phy addr for rev5 boards.   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mpc52xx, digsy_mtc: protect default flash sectors   Wolfgang Denk
• [U-Boot] [PATCH v2] lib/hashtable: fix env var autocompletion   Wolfgang Denk
• [U-Boot] [PATCH] [v2] powerpc: fix implementation of out_8 to match the other out_XX functions   Wolfgang Denk
• [U-Boot] [PATCH v5] common: add a grepenv command   Wolfgang Denk
• [U-Boot] fw_setenv usage for multiple copies of U-Boot Environment Variables   Wolfgang Denk
• [U-Boot] [PATCH]: Smart Autoboot   Wolfgang Denk
• [U-Boot] [PATCH] README.arm-relocation: get relocated address in gdb   Wolfgang Denk
• [U-Boot] Away from the list from Apr 29th to May 2nd inclusive   Wolfgang Denk
• [U-Boot] [PATCH] README.arm-relocation: get relocated address in gdb   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-video/master   Wolfgang Denk
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Wolfgang Denk
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Wolfgang Denk
• [U-Boot] mmcinit in U-Boot   Wolfgang Denk
• [U-Boot] strawman Fastboot in U-Boot Design Doc   Wolfgang Denk
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Wolfgang Denk
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Wolfgang Denk
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Wolfgang Denk
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Wolfgang Denk
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Wolfgang Denk
• [U-Boot] Please pull u-boot-mmc.git   Wolfgang Denk
• [U-Boot] musb: usb storage: USB device not accepting new address error   Wolfgang Denk
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Wolfgang Denk
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Wolfgang Denk
• [U-Boot] [PATCH] [v4] powerpc/85xx: fix compatible property for the L2 cache node   Wolfgang Denk
• [U-Boot] [PATCH v4 00/23] keymile board update   Wolfgang Denk
• [U-Boot] [PATCH] [v4] powerpc/85xx: fix compatible property for the L2 cache node   Wolfgang Denk
• [U-Boot] [PATCH] Handle most LDSCRIPT setting centrally   Wolfgang Denk
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Wolfgang Denk
• [U-Boot] [PATCH] tools/env: document current cross-compilation issues and workaround   Wolfgang Denk
• [U-Boot] [PATCH] lib, vsprintf: introduce strict_strtoul   Wolfgang Denk
• [U-Boot] [PATCH 01/30] lib, vsprintf: introduce strict_strtoul   Wolfgang Denk
• [U-Boot] [PATCH 5/7] JFFS2: Change DEFAULT_EMPTY_SCAN_SIZE to 256 Bytes   Wolfgang Denk
• [U-Boot] [PATCH 06/30] powerpc/km82xx: move SDRAM config to board config   Wolfgang Denk
• [U-Boot] [PATCH 08/30] powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support   Wolfgang Denk
• [U-Boot] [PATCH 10/30] arm/km: add addbootcount environment variable   Wolfgang Denk
• [U-Boot] [PATCH 17/30] cramfs: make cramfs usable without a NOR flash   Wolfgang Denk
• [U-Boot] [PATCH 21/30] common/hush: make get_local_var visible for other users   Wolfgang Denk
• [U-Boot] [PATCH 22/30] km/common: implement setboardid as a command   Wolfgang Denk
• [U-Boot] [PATCH 23/30] km/common: replace env var checkboardidlist by function   Wolfgang Denk
• [U-Boot] [PATCH 24/30] km/common: add pnvramsize to default environment   Wolfgang Denk
• [U-Boot] [Test] [u-boot] u-boot timing analysis   Wolfgang Denk
• [U-Boot] [PATCH] zlib: split up to match original source tree   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/p4080: Add support for secure boot flow on CoreNet Based QorIQ chips   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdb   Wolfgang Denk
• [U-Boot] [PATCH v4] spi: add new driver for OpenCores tiny_spi   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] cmd_ide: enhance new feature "CONFIG_IDE_AHB"   Wolfgang Denk
• [U-Boot] [PATCH v2 2/2] ftide020: add faraday ide ahb controller   Wolfgang Denk
• [U-Boot] [PATCH] cfi_flash driver: fixed addressing for 8-bit flash buses.   Wolfgang Denk
• [U-Boot] [PATCH] part_dos: allocate sector buffer dynamically   Wolfgang Denk
• [U-Boot] [PATCH 3/5] Add documentation for USB Host Networking   Wolfgang Denk
• [U-Boot] [RFC] Allow for parallel builds and saved output   Wolfgang Denk
• [U-Boot] [RFC] Act as a TFTP server   Wolfgang Denk
• [U-Boot] [PATCH v5 3/5] Add documentation for USB Host Networking   Wolfgang Denk
• [U-Boot] [PATCH] MatrixVision common code: use getenv_f instead of snprintf.   Wolfgang Denk
• [U-Boot] [PATCH] MPC837x: set i2c1_clk Running on mpc837x without CONFIG_FSL_ESDHC leads to i2c1_clk not being set at all. It is bound to clock of encryption module. fix this.   Wolfgang Denk
• [U-Boot] [PATCH 1/4] MergerBox: Add board config file.   Wolfgang Denk
• [U-Boot] [PATCH 2/4] MergerBox: add documentation.   Wolfgang Denk
• [U-Boot] [PATCH 3/4] MergerBox: add maintainer and boards.cfg entries.   Wolfgang Denk
• [U-Boot] [PATCH 4/4] MergerBox: add board specific files in vendor dir.   Wolfgang Denk
• [U-Boot] [PATCH 1/6] README: remove spurious line   Wolfgang Denk
• [U-Boot] [PATCH 2/6] NET: pass source IP address to packet handlers   Wolfgang Denk
• [U-Boot] [PATCH 2/6] NET: pass source IP address to packet handlers   Wolfgang Denk
• [U-Boot] [PATCH v3] cmd_nvedit.c: clean up with checkpatch   Wolfgang Denk
• [U-Boot] [PATCH] xilinx_emaclite.c ping-pong macro names   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] miiphy: miiphyutil.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_mdio.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] IDE: fix compiler warnings   Wolfgang Denk
• [U-Boot] Daughter card detection   Dev, Kapil
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Dudhat Dipen-B09055
• [U-Boot] DreamPlug bootloader replacement   Drassal, Allan
• [U-Boot] mpq101 board broken   Alex Dubov
• [U-Boot] mpq101 board broken   Alex Dubov
• [U-Boot] mpq101 board broken   Alex Dubov
• [U-Boot] [PATCH] STx AMC8548: initial support for Silicon Turnkey Express AMC8548 board   Alex Dubov
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Dipen Dudhat
• [U-Boot] [PATCH 0/8] ppc4xx: Update DLVision 10G support   Dirk Eibach
• [U-Boot] [PATCH 1/8] ppc4xx: Improve DLVision-10G PLL setup   Dirk Eibach
• [U-Boot] [PATCH 2/8] ppc4xx: Improve video board detection   Dirk Eibach
• [U-Boot] [PATCH 3/8] hwmon: Extend lm63.c to support LM64   Dirk Eibach
• [U-Boot] [PATCH 4/8] ppc4xx: Adapt DLVision 10G to new FPGA firmware   Dirk Eibach
• [U-Boot] [PATCH 5/8] ppc4xx: Set DLVision 10G osd position to linux defaults   Dirk Eibach
• [U-Boot] [PATCH 6/8] ppc4xx: Enable MPC92469AC on DLVision 10G   Dirk Eibach
• [U-Boot] [PATCH 7/8] ppc4xx: Improve fan PWM curve on DLVision 10G   Dirk Eibach
• [U-Boot] [PATCH 8/8] ppc4xx: Do not stop booting on any keypress on dlvision-10g   Dirk Eibach
• [U-Boot] [PATCH 3/8 v2] ppc4xx: Enable LM64 on DLVision 10G   Dirk Eibach
• [U-Boot] [PATCH] hwmon: Extend lm63.c to support LM64   Dirk Eibach
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: fix nand_spl   Fabio Estevam
• [U-Boot] [PATCH] MX25: tx25: Add _end section on nand_spl   Fabio Estevam
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: fix nand_spl   Fabio Estevam
• [U-Boot] [PATCH] gpio: imx: Fix return value on error   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] MX31: mx31pdk: Add watchdog support   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] MX31: mx31pdk: Print the cause of reset   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx31: Print the silicon version   Fabio Estevam
• [U-Boot] [PATCH v2] ARM: mx31: Print the silicon version   Fabio Estevam
• [U-Boot] [PATCH v3] ARM: mx31: Print the silicon version   Fabio Estevam
• [U-Boot] [PATCH v4] ARM: mx31: Print the silicon version   Fabio Estevam
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Fabio Estevam
• [U-Boot] [PATCH] MX51: mx51evk: Use struct to access SRSR register instead of offset   Fabio Estevam
• [U-Boot] [PATCH v2] MX51: mx51evk: Use struct to access SRSR register instead of offset   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] ARM: MX31: Fix file name label   Fabio Estevam
• [U-Boot] [PATCH v3 2/3] MX31: Introduce get_reset_cause()   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] MX31: mx31pdk: Print the cause of reset   Fabio Estevam
• [U-Boot] [PATCH V3 1/2] MX5: factor out boot cause funciton to common code   Fabio Estevam
• [U-Boot] [PATCH v4 1/3] ARM: MX31: Fix file name label   Fabio Estevam
• [U-Boot] [PATCH v4 2/3] MX31: Introduce get_reset_cause()   Fabio Estevam
• [U-Boot] [PATCH v4 3/3] MX31: mx31pdk: Print the cause of reset   Fabio Estevam
• [U-Boot] [PATCH v5] MX31: Introduce get_reset_cause()   Fabio Estevam
• [U-Boot] [PATCH] MX31: mx31pdk: Make the board name simpler.   Fabio Estevam
• [U-Boot] [PATCH] MX31: Make get_cpu_rev() and get_reset_cause() static   Fabio Estevam
• [U-Boot] [PATCH] MX53: Handle silicon revision 2.1 case   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] MX31: mx31pdk: Add watchdog support   Fabio Estevam
• [U-Boot] [PATCH v2] MX53: Handle silicon revision 2.1 case   Fabio Estevam
• [U-Boot] [PATCH] mx31pdk: Clean up mx31pdk.h file   Fabio Estevam
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: Add watchdog support   Fabio Estevam
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Fabio Estevam
• [U-Boot] OFFICIAL CASH PRIZE ANNUAL WEB ONLINE GRANT   Mr.Stuart Etherington
• [U-Boot] [PATCH 1/2] NAND: Fix integer overflow in ONFI detection of chips >= 4GiB   Florian Fainelli
• [U-Boot] [PATCH 2/2] NAND: rearrange ONFI revision checking, add ONFI 2.3   Florian Fainelli
• [U-Boot] PPC405EX CHIP_21 erratum   Steven A. Falco
• [U-Boot] mpq101 board broken   Andy Fleming
• [U-Boot] [PATCH 1/2] env_mmc: Allow board code to override the environment address   Andy Fleming
• [U-Boot] [PATCH v2 0/6] Universal PHY Infrastructure   Andy Fleming
• [U-Boot] [PATCH v2 1/6] tsec: use IO accessors for IO accesses   Andy Fleming
• [U-Boot] [PATCH v2 2/6] tsec: arrange the code to avoid useless function declaration   Andy Fleming
• [U-Boot] [PATCH v2 3/6] Remove instances of phy_read/write   Andy Fleming
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Andy Fleming
• [U-Boot] [PATCH v2 5/6] phylib: Add a bunch of PHY drivers from tsec   Andy Fleming
• [U-Boot] [PATCH v2 6/6] tsec: Convert tsec to use PHY Lib   Andy Fleming
• [U-Boot] [PATCH v2 0/6] Universal PHY Infrastructure   Andy Fleming
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Andy Fleming
• [U-Boot] [PATCH v3 0/8] Universal PHY Infrastructure   Andy Fleming
• [U-Boot] [PATCH v3 1/8] tsec: use IO accessors for IO accesses   Andy Fleming
• [U-Boot] [PATCH v3 2/8] tsec: arrange the code to avoid useless function declaration   Andy Fleming
• [U-Boot] [PATCH v3 3/8] Remove instances of phy_read/write   Andy Fleming
• [U-Boot] [PATCH v3 4/8] miiphy: Fix some formatting issues   Andy Fleming
• [U-Boot] [PATCH v3 5/8] Create PHY Lib for U-Boot   Andy Fleming
• [U-Boot] [PATCH v3 6/8] phylib: Add a bunch of PHY drivers from tsec   Andy Fleming
• [U-Boot] [PATCH v3 7/8] tsec: Convert tsec to use PHY Lib   Andy Fleming
• [U-Boot] [PATCH v3 8/8] Add mdio command for new PHY infrastructure   Andy Fleming
• [U-Boot] [PATCH v3 0/8] Universal PHY Infrastructure   Andy Fleming
• [U-Boot] [PATCH v4 5/8] Create PHY Lib for U-Boot   Andy Fleming
• [U-Boot] [PATCH v4 7/8] tsec: Convert tsec to use PHY Lib   Andy Fleming
• [U-Boot] [PATCH v5 0/9] Universal PHY Infrastructure   Andy Fleming
• [U-Boot] [PATCH v5 1/9] tsec: use IO accessors for IO accesses   Andy Fleming
• [U-Boot] [PATCH v5 2/9] tsec: arrange the code to avoid useless function declaration   Andy Fleming
• [U-Boot] [PATCH v5 3/9] Remove instances of phy_read/write   Andy Fleming
• [U-Boot] [PATCH v5 4/9] miiphy: Fix some formatting issues   Andy Fleming
• [U-Boot] [PATCH v5 5/9] Create PHY Lib for U-Boot   Andy Fleming
• [U-Boot] [PATCH v5 6/9] phylib: Add a bunch of PHY drivers from tsec   Andy Fleming
• [U-Boot] [PATCH v5 7/9] tsec: Convert tsec to use PHY Lib   Andy Fleming
• [U-Boot] [PATCH v5 8/9] fsl: Change fsl_phy_enet_if to phy_interface_t   Andy Fleming
• [U-Boot] [PATCH v5 9/9] Add mdio command for new PHY infrastructure   Andy Fleming
• [U-Boot] [RFC] Allow for parallel builds and saved output   Andy Fleming
• [U-Boot] [PATCH 0/4] generic mmc_spi driver   Andy Fleming
• [U-Boot] [U-BOOT] [PATCH] mmc: enable switch partition function   Andy Fleming
• [U-Boot] [PATCH v3 2/3] MMC: Add support for PL180 ARM mmc device   Andy Fleming
• [U-Boot] [PATCH v3 3/3] ARMV7: Vexpress: Add MMC support   Andy Fleming
• [U-Boot] [RFC 2/3][v4] mmc: SEND_OP_COND considers card capabilities (voltage)   Andy Fleming
• [U-Boot] [PATCH v5 0/9] Universal PHY Infrastructure   Andy Fleming
• [U-Boot] [PATCH v3 1/4] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Andy Fleming
• [U-Boot] [PATCH] cfi_flash: Fix CONFIG_SYS_FLASH_AUTOPROTECT_LIST   Andy Fleming
• [U-Boot] building breakage for xpedite5xxx boards   Andy Fleming
• [U-Boot] [PATCH] cfi_flash: Fix CONFIG_SYS_FLASH_AUTOPROTECT_LIST   Andy Fleming
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] [PATCHv2] MMC: disable multiblock rw on old rev OMAP3 silicon   Andy Fleming
• [U-Boot] Please pull u-boot-mmc.git phylib   Andy Fleming
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Andy Fleming
• [U-Boot] [PATCH v3 3/3] ARMV7: Vexpress: Add MMC support   Andy Fleming
• [U-Boot] [PATCH] tsec: Fix MDIO on devices with eTSEC2   Andy Fleming
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Andy Fleming
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Andy Fleming
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] Beagle mux config: nCS5 vs. DMAREQ2?   Orjan Friberg
• [U-Boot] [PATCH v2] common: add a grepenv command   Mike Frysinger
• [U-Boot] OSE support shouldnt be enabled by default   Mike Frysinger
• [U-Boot] [PATCH] crc32: make command optional   Mike Frysinger
• [U-Boot] [PATCH] md5sum/sha1sum/unzip: split out of mondo mem file   Mike Frysinger
• [U-Boot] [PATCH] gpio: generalize for all generic gpio providers   Mike Frysinger
• [U-Boot] [PATCH 00/34] Blackfin updates for 2011.06   Mike Frysinger
• [U-Boot] [PATCH 01/34] Blackfin: bf518f-ezbrd: don't require SPI logic all the time   Mike Frysinger
• [U-Boot] [PATCH 02/34] Blackfin: skip RAM display for 0 mem systems   Mike Frysinger
• [U-Boot] [PATCH 03/34] Blackfin: drop CONFIG_SYS_TEXT_BASE from boards   Mike Frysinger
• [U-Boot] [PATCH 04/34] Blackfin: unify bootmode based LDR_FLAGS setup   Mike Frysinger
• [U-Boot] [PATCH 05/34] Blackfin: move CONFIG_BFIN_CPU back to board config.h   Mike Frysinger
• [U-Boot] [PATCH 06/34] Blackfin: bf527-sdp: update custom CFLAGS paths   Mike Frysinger
• [U-Boot] [PATCH 07/34] Blackfin: bf537-pnav/blackstamp/blackvme: drop empty config.mk files   Mike Frysinger
• [U-Boot] [PATCH 08/34] Blackfin: dnp5370: new board port   Mike Frysinger
• [U-Boot] [PATCH 09/34] Blackfin: bf525-ucr2: new board port   Mike Frysinger
• [U-Boot] [PATCH 10/34] Blackfin: serial: clean up muxing a bit   Mike Frysinger
• [U-Boot] [PATCH 11/34] Blackfin: bf537-minotaur/bf537-srv1: undefine nfs when net is disabled   Mike Frysinger
• [U-Boot] [PATCH 12/34] Blackfin: bf537: fix L1 data defines   Mike Frysinger
• [U-Boot] [PATCH 13/34] Blackfin: bf561-ezkit/ibf-dsp561: invert env offset/addr logic   Mike Frysinger
• [U-Boot] [PATCH 14/34] Blackfin: fix bd_t handling   Mike Frysinger
• [U-Boot] [PATCH 15/34] Blackfin: BF50x: new processor port   Mike Frysinger
• [U-Boot] [PATCH 16/34] Blackfin: drop duplicate system mmr and L1 scratch defines   Mike Frysinger
• [U-Boot] [PATCH 17/34] Blackfin: BF52x: unify duplicated headers   Mike Frysinger
• [U-Boot] [PATCH 18/34] Blackfin: BF537: unify duplicated headers   Mike Frysinger
• [U-Boot] [PATCH 19/34] Blackfin: only check for os log when we have external memory   Mike Frysinger
• [U-Boot] [PATCH 20/34] Blackfin: turn off caches when self initializing   Mike Frysinger
• [U-Boot] [PATCH 21/34] Blackfin: default to L1 bank A when L1 bank B does not exist   Mike Frysinger
• [U-Boot] [PATCH 22/34] Blackfin: bf506f-ezkit: new board port   Mike Frysinger
• [U-Boot] [PATCH 23/34] Blackfin: adi boards: drop old ELF define   Mike Frysinger
• [U-Boot] [PATCH 24/34] Blackfin: bootrom.h: sync with toolchain   Mike Frysinger
• [U-Boot] [PATCH 25/34] Blackfin: bootldr: use common defines   Mike Frysinger
• [U-Boot] [PATCH 26/34] Blackfin: ldrinfo: new command   Mike Frysinger
• [U-Boot] [PATCH 27/34] Blackfin: adi boards: enable ldrinfo   Mike Frysinger
• [U-Boot] [PATCH 28/34] Blackfin: bfin_sdh: set all timer bits before transfer   Mike Frysinger
• [U-Boot] [PATCH 29/34] Blackfin: bfin_sdh: add support for multiblock operations   Mike Frysinger
• [U-Boot] [PATCH 30/34] Blackfin: adi boards: enable CONFIG_MONITOR_IS_IN_RAM   Mike Frysinger
• [U-Boot] [PATCH 31/34] Blackfin: replace "bfin_reset_or_hang()" with "panic()"   Mike Frysinger
• [U-Boot] [PATCH 32/34] Blackfin: bf548-ezkit: move env sector   Mike Frysinger
• [U-Boot] [PATCH 33/34] Blackfin: bf518f-ezbrd: get MAC from flash   Mike Frysinger
• [U-Boot] [PATCH 34/34] Blackfin: bf526-ezbrd: get MAC from flash   Mike Frysinger
• [U-Boot] env: fix env var autocompletion   Mike Frysinger
• [U-Boot] [PATCH v4] common: add a grepenv command   Mike Frysinger
• [U-Boot] CONFIG_SILENT_CONSOLE not working with NAND env   Mike Frysinger
• [U-Boot] [PATCH] imximage: drop useless config.h include   Mike Frysinger
• [U-Boot] [PATCH v2 5/6] phylib: Add a bunch of PHY drivers from tsec   Mike Frysinger
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Mike Frysinger
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Mike Frysinger
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Mike Frysinger
• [U-Boot] [PATCH v2 0/6] Universal PHY Infrastructure   Mike Frysinger
• [U-Boot] [PATCH] Handle most LDSCRIPT setting centrally   Mike Frysinger
• [U-Boot] [PATCH] config_defaults.h: drop OSE bootm default   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH v3 0/8] Universal PHY Infrastructure   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: use common LDSCRIPT logic   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: use common LDSCRIPT logic   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: cmd_gpio: allow port pins over 15   Mike Frysinger
• [U-Boot] [PATCH] zlib: split up to match original source tree   Mike Frysinger
• [U-Boot] [PATCH] cfi_flash: reverse geometry for M29W800DT parts   Mike Frysinger
• [U-Boot] [PATCH] gpio: generalize for all generic gpio providers   Mike Frysinger
• [U-Boot] [PATCH 1/2] SPI: Add struct spi_flash.sector_size parameter   Mike Frysinger
• [U-Boot] [PATCH 0/9] SPI Flash updates for 2011.06   Mike Frysinger
• [U-Boot] [PATCH 1/9] sf: punt unused spi_flash_region struct   Mike Frysinger
• [U-Boot] [PATCH 2/9] sf: atmel: undo unification of status polling   Mike Frysinger
• [U-Boot] [PATCH 3/9] sf: add struct spi_flash.sector_size parameter   Mike Frysinger
• [U-Boot] [PATCH 4/9] sf: sst: setup read func   Mike Frysinger
• [U-Boot] [PATCH 5/9] sf: localize erase funcs   Mike Frysinger
• [U-Boot] [PATCH 6/9] cmd_sf: add handler for +len arg for erase command   Mike Frysinger
• [U-Boot] [PATCH 7/9] sf: use print_size() for sector_size output   Mike Frysinger
• [U-Boot] [PATCH 8/9] cmd_sf: drop device status message when probing   Mike Frysinger
• [U-Boot] [PATCH 9/9] cmd_sf: use cmd_usage() in more places   Mike Frysinger
• [U-Boot] [PATCH 1/2] powerpc: eSPI and eSPI controller support   Mike Frysinger
• [U-Boot] [PATCH 0/4] generic mmc_spi driver   Mike Frysinger
• [U-Boot] [PATCH] gpio: check request result   Mike Frysinger
• [U-Boot] [PATCH] Do not copy to same address   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: adi boards: add eon to the "all" spi flash list   Mike Frysinger
• [U-Boot] [PATCH] gpio: generalize for all generic gpio providers   Mike Frysinger
• [U-Boot] ramtron f-ram   Mike Frysinger
• [U-Boot] Image copy to ram   Mike Frysinger
• [U-Boot] Image copy to ram   Mike Frysinger
• [U-Boot] [PATCH 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Mike Frysinger
• [U-Boot] [PATCH] imximage: drop useless config.h include   Mike Frysinger
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Mike Frysinger
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH 7/6] sf: sst: add support for SST25VF064C   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Mike Frysinger
• [U-Boot] [PATCH 0/4] generic mmc_spi driver   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git (misc branch)   Mike Frysinger
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Mike Frysinger
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH 6/9] cmd_sf: add handler for +len arg for erase command   Mike Frysinger
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH v2] lib/hashtable: fix env var autocompletion   Mike Frysinger
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Mike Frysinger
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Mike Frysinger
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Mike Frysinger
• [U-Boot] [PATCH] sf: kick watchdog when polling   Mike Frysinger
• [U-Boot] [PATCH] musb: process control messages after roothub accepted it   Mike Frysinger
• [U-Boot] [PATCH] sf: spansion: add support for new spansion flash   Mike Frysinger
• [U-Boot] [PATCH] mtd/spi/macronix.c: add MX25L4005 and MX25L8005   Mike Frysinger
• [U-Boot] RFC: getramsize() prototype and volatile qualifier   Mike Frysinger
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Mike Frysinger
• [U-Boot] [PATCH 2/2][v2] powerpc: make espi can read more than 0xFFFA bytes   Mike Frysinger
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Mike Frysinger
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Mike Frysinger
• [U-Boot] RFC: getramsize() prototype and volatile qualifier   Mike Frysinger
• [U-Boot] [PATCH] MAKEALL: add -h/--help options   Mike Frysinger
• [U-Boot] [PATCH 1/2][v3] powerpc: eSPI and eSPI controller support   Mike Frysinger
• [U-Boot] [PATCH] andes_spi: add andes_spi interface   Mike Frysinger
• [U-Boot] [PATCH] andes_spi: add andes_spi interface   Mike Frysinger
• [U-Boot] repurposing uboot's console UART after booting   Mike Frysinger
• [U-Boot] [PATCH] env: allow people to force envcrc building   Mike Frysinger
• [U-Boot] [PATCH 1/4] sf: unify write enable commands   Mike Frysinger
• [U-Boot] [PATCH 2/4] sf: unify write funcs   Mike Frysinger
• [U-Boot] [PATCH 3/4] sf: kill off now-unused local state   Mike Frysinger
• [U-Boot] [PATCH 4/4] sf: eon/stmicro: inline useless ID defines   Mike Frysinger
• [U-Boot] [PATCH] constify default env   Mike Frysinger
• [U-Boot] [PATCH] cmd_usage: constify   Mike Frysinger
• [U-Boot] [PATCH] command: constify _do_help input tables   Mike Frysinger
• [U-Boot] [PATCH] command: constify _do_help input tables   Mike Frysinger
• [U-Boot] [PATCH] env: allow people to force envcrc building   Mike Frysinger
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Mike Frysinger
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Mike Frysinger
• [U-Boot] [PATCH] andes_spi: add andes_spi interface   Mike Frysinger
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Mike Frysinger
• [U-Boot] [PATCH 0/2] SPI updates   Mike Frysinger
• [U-Boot] [PATCH 1/2] spi: add spi_set_speed func   Mike Frysinger
• [U-Boot] [PATCH 2/2] bfin_spi: add spi_set_speed   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git (spi branch)   Mike Frysinger
• [U-Boot] [PATCH 0/3] Blackfin minor config updates for 2011.06   Mike Frysinger
• [U-Boot] [PATCH 1/3] Blackfin: bf537-stamp/bf527-ad7160-eval: convert to mmc_spi   Mike Frysinger
• [U-Boot] [PATCH 2/3] Blackfin: bf506f-ezkit: disable import/export env commands   Mike Frysinger
• [U-Boot] [PATCH 3/3] Blackfin: adi boards: add eon to the "all" spi flash list   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH v2] andes_spi: add andes_spi interface   Mike Frysinger
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Mike Frysinger
• [U-Boot] How can I replace the Linux scrolling text during boot-up with a splash image?   Mike Frysinger
• [U-Boot] [PATCH 2/4 v2] sf: unify write funcs   Mike Frysinger
• [U-Boot] [PATCH 5/4] sf: unify write disable commands   Mike Frysinger
• [U-Boot] [PATCH 6/4] sf: sst: support newer standardized flashes   Mike Frysinger
• [U-Boot] [PATCH 1/4] sf: unify write enable commands   Mike Frysinger
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Mike Frysinger
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Mike Frysinger
• [U-Boot] [PATCH] disable security warning flags when possible   Mike Frysinger
• [U-Boot] [PATCH] disable security warning flags when possible   Mike Frysinger
• [U-Boot] punt duplicate 2009.01-rc2 tag   Mike Frysinger
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Mike Frysinger
• [U-Boot] [PATCH][v4] powerpc: eSPI and eSPI controller support   Mike Frysinger
• [U-Boot] Query - BF537 STAMP Board U-boot Prompt‏   Mike Frysinger
• [U-Boot] boot-up time optimization. Where to start?   Mike Frysinger
• [U-Boot] Query - BF537 STAMP Board U-boot Prompt‏   Mike Frysinger
• [U-Boot] [PATCH] README: Clarify difference of CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG   Mike Frysinger
• [U-Boot] boot-up time optimization. Where to start?   Mike Frysinger
• [U-Boot] Second serial port access ...   Mike Frysinger
• [U-Boot] [PATCH] spi: Tegra2: Add SPI driver for SPIFLASH on Seaboard   Mike Frysinger
• [U-Boot] [PATCH] GPIO: Tegra2: add GPIO driver for Seaboard and Harmony   Mike Frysinger
• [U-Boot] [PATCH] README: Clarify difference of CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG   Mike Frysinger
• [U-Boot] [PATCH 1/3] serial: push default_serial_console to drivers   Mike Frysinger
• [U-Boot] [PATCH 2/3] serial: drop serial_register return value   Mike Frysinger
• [U-Boot] [PATCH 3/3] serial: drop useless ctlr field   Mike Frysinger
• [U-Boot] [PATCH 2/9] mvgbe: Support preserving the existing MAC address   Mike Frysinger
• [U-Boot] [PATCH 2/9] mvgbe: Support preserving the existing MAC address   Mike Frysinger
• [U-Boot] [RFC] ks8851_mll: add ethernet support   Mike Frysinger
• [U-Boot] [PATCH v2 6/6] TFTP: add tftpsrv command   Mike Frysinger
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Mike Frysinger
• [U-Boot] [PATCH 2/2][v2] powerpc: make espi can read more than 0xFFFA bytes   Mike Frysinger
• [U-Boot] [PATCH 2/2][v3] powerpc: make espi can read more than 0xFFFA bytes   Mike Frysinger
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Mike Frysinger
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Mike Frysinger
• [U-Boot] u-boot fails to build for powerpc with gcc 4.5.1   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH 1/2] env_mmc: Allow board code to override the environment address   Kumar Gala
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Kumar Gala
• [U-Boot] [PATCH 2/2] powerpc/85xx: Enable eSDHC boot support on P2020 DS   Kumar Gala
• [U-Boot] [PATCH 1/2] env_mmc: Allow board code to override the environment address   Kumar Gala
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Kumar Gala
• [U-Boot] [PATCH] fsl_esdhc: Deal with watermark level register related changes   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: don't init SDRAM when CONFIG_SYS_RAMBOOT   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add some defines & registers in immap_85xx.h   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add P1021 specific QE and UEC support   Kumar Gala
• [U-Boot] [PATCH] powerpc/qoriq: Update USB mode device tree fixup   Kumar Gala
• [U-Boot] [PATCH v2 1/6] tsec: use IO accessors for IO accesses   Kumar Gala
• [U-Boot] [PATCH v3 7/8] tsec: Convert tsec to use PHY Lib   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Drop CONFIG_VIDEO support on corenet_ds boards   Kumar Gala
• [U-Boot] [PATCH v1 1/2] powerpc/85xx: rename NAND prefixes to CONFIG_SYS   Kumar Gala
• [U-Boot] [PATCH v1 2/2] nand/spl: Assuming a static nand page size to reduce code size   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add support to save environment in SD card on p1_p2_rdb   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for P1010/P1014 SoC   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Modify NAND loader makefiles to compile NAND_SPL linker script   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Change CS timing parameters before changing CS properties on IFC   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add device tree fixup for bman portal   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdb   Kumar Gala
• [U-Boot] [PATCH] powerpc/p4080: Add support for secure boot flow on CoreNet Based QorIQ chips   Kumar Gala
• [U-Boot] [PATCH] powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code)   Kumar Gala
• [U-Boot] [PATCH 1/2] powerpc/85xx: fsl_corenet_serdes code rework   Kumar Gala
• [U-Boot] [PATCH 2/2] p4080/serdes: Implement the XAUI workaround for SERDES9 erratum   Kumar Gala
• [U-Boot] [PATCH 1/2] P4080/PBL: add support for boot from SPI flash.   Kumar Gala
• [U-Boot] [PATCH 2/6] powerpc/85xx: Enable support for ATI graphics cards on P1022DS   Kumar Gala
• [U-Boot] [PATCH 4/6] powerpc/85xx: Add support usb2/etsec and tdm/audio pin multiplex on P1022DS   Kumar Gala
• [U-Boot] [PATCH 5/6] powerpc/85xx: Update default hwconfig on P1022DS   Kumar Gala
• [U-Boot] [PATCH v2 4/6] powerpc/85xx: Add support usb2/etsec and tdm/audio pin multiplex on P1022DS   Kumar Gala
• [U-Boot] [PATCH 3/6] powerpc/85xx: Added DIU configs for P1022DS and fixed LVDS config   Kumar Gala
• [U-Boot] [PATCH 6/6] powerpc/85xx: Add SHARP LQ084S3LG01 LCD support on P1022DS   Kumar Gala
• [U-Boot] [PATCH] fsl_esdhc: Deal with watermark level register related changes   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH] Removed clearing of L2-as-SRAM   Kumar Gala
• [U-Boot] [PATCH 1/1] fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020   Kumar Gala
• [U-Boot] building breakage for xpedite5xxx boards   Kumar Gala
• [U-Boot] [RFC] Centralise documentation of CONFIG_ options (and finding unused ones)   Kumar Gala
• [U-Boot] [PATCHv4 1/4] Serial: p1011: new vendor init options   Kumar Gala
• [U-Boot] [PATCH] QorIQ corenet_ds.h: Wrong PCIe 3 virtual address   Kumar Gala
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: handle both "secX.Y" and "sec-vX.Y" properties   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs   Kumar Gala
• [U-Boot] [PATCH 1/3] powerpc/85xx: Enable eSPI controller & SPI bootsupport on P2020DS   Kumar Gala
• [U-Boot] [PATCH 2/3] powerpc/85xx: Enable eSPI support for p1_p2_rdb   Kumar Gala
• [U-Boot] [PATCH 3/3] powerpc/85xx: Enable eSPI support on P1022DS   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Change timebase divisor to be defined per processor   Kumar Gala
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Kumar Gala
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Change timebase divisor to be defined per processor   Kumar Gala
• [U-Boot] [PATCH 1/4] powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005   Kumar Gala
• [U-Boot] [PATCH 2/4] powerpc/85xx: Display SERDES 8 erratum warning if banks are not disabled   Kumar Gala
• [U-Boot] [PATCH 3/4] powerpc/85xx: Extend SERDES9 erratum work-around to SGMII, SRIO, and AURORA   Kumar Gala
• [U-Boot] [PATCH 4/4] powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001   Kumar Gala
• [U-Boot] [PATCH 4/4] powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Change timebase divisor to be defined per processor   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/85xx: Change timebase divisor to be defined per processor   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI is not set   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards   Kumar Gala
• [U-Boot] powerpc/86xx: remove empty board_early_init_f()   Kumar Gala
• [U-Boot] [PATCH] fsl: add 'pixis_reset dump' command   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards   Kumar Gala
• [U-Boot] [PATCH] tsec: Fix MDIO on devices with eTSEC2   Kumar Gala
• [U-Boot] [PATCH][v5] powerpc: eSPI and eSPI controller support   Kumar Gala
• [U-Boot] [PATCH 1/3] powerpc/85xx: Enable eSPI controller & SPI bootsupport on P2020DS   Kumar Gala
• [U-Boot] [PATCH 2/3] powerpc/85xx: Enable eSPI support for p1_p2_rdb   Kumar Gala
• [U-Boot] [PATCH 3/3] powerpc/85xx: Enable eSPI support on P1022DS   Kumar Gala
• [U-Boot] [PATCH 1/4] powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005   Kumar Gala
• [U-Boot] [PATCH 2/4] powerpc/85xx: Display SERDES 8 erratum warning if banks are not disabled   Kumar Gala
• [U-Boot] [PATCH 3/4] powerpc/85xx: Extend SERDES9 erratum work-around to SGMII, SRIO, and AURORA   Kumar Gala
• [U-Boot] [PATCH 4/4] powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: handle both "secX.Y" and "sec-vX.Y" properties   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/85xx: Change timebase divisor to be defined per processor   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020   Kumar Gala
• [U-Boot] [PATCH] powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code)   Kumar Gala
• [U-Boot] [PATCH 1/2] powerpc/85xx: fsl_corenet_serdes code rework   Kumar Gala
• [U-Boot] [PATCH 2/2] p4080/serdes: Implement the XAUI workaround for SERDES9 erratum   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add device tree fixup for bman portal   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdb   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Change CS timing parameters before changing CS properties on IFC   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for P1010/P1014 SoC   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add support to save environment in SD card on p1_p2_rdb   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards   Kumar Gala
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: fix compatible property for the L2 cache node   Kumar Gala
• [U-Boot] [PATCH] fsl-ddr: Fix mixed-case macro names   Kumar Gala
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Kumar Gala
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Kumar Gala
• [U-Boot] [PATCH] ehci-pci: Fix PCI EHCI driver for 36-bit   Kumar Gala
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Kumar Gala
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Kumar Gala
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Kumar Gala
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Kumar Gala
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH] Fix the issue of _end symbol not being found while building   Sughosh Ganu
• [U-Boot] [PATCH] Fix the issue of _end symbol not being found while building   Sughosh Ganu
• [U-Boot] [PATCH 3/6] Davinci: ea20: Add NAND support   Ben Gardiner
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Ben Gardiner
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Ben Gardiner
• [U-Boot] [PATCH 3/6] Davinci: ea20: Add NAND support   Ben Gardiner
• [U-Boot] [PATCH] da850evm: fix NAND WSTROBE and TA timings   Ben Gardiner
• [U-Boot] [PATCH] README.arm-relocation: get relocated address in gdb   Ben Gardiner
• [U-Boot] [PATCH] README.arm-relocation: get relocated address in gdb   Ben Gardiner
• [U-Boot] [PATCH v2 0/2] README.arm-relocation: debugging options update   Ben Gardiner
• [U-Boot] [PATCH v2 1/2] README.arm-relocation: get relocated address from bdinfo   Ben Gardiner
• [U-Boot] [PATCH 2/2] README.arm-relocation: get relocated address in gdb   Ben Gardiner
• [U-Boot] [PATCH v3 0/2] README.arm-relocation: debugging options update   Ben Gardiner
• [U-Boot] [PATCH v3 1/2] README.arm-relocation: get relocated address from bdinfo   Ben Gardiner
• [U-Boot] [PATCH v3 2/2] README.arm-relocation: get relocated address in gdb   Ben Gardiner
• [U-Boot] [PATCH 0/5] introduce nand write.ubi, and drop ffs for jffs2 too   Ben Gardiner
• [U-Boot] [PATCH 1/5] nand_base: trivial: fix comment read/write comment   Ben Gardiner
• [U-Boot] [PATCH 2/5] nand_util: convert nand_write_skip_bad() to flags   Ben Gardiner
• [U-Boot] [PATCH 3/5] nand_util: drop trailing all-0xff pages if requested   Ben Gardiner
• [U-Boot] [PATCH 4/5] cmd_nand: add nand write.ubi command   Ben Gardiner
• [U-Boot] [PATCH 5/5] cmd_nand: also drop 0xff pages for jffs2   Ben Gardiner
• [U-Boot] USB to Ethernet (asix)   Simon Glass
• [U-Boot] USB to Ethernet (asix)   Simon Glass
• [U-Boot] [PATCH 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH 3/5] Add documentation for USB Host Networking   Simon Glass
• [U-Boot] [PATCH 4/5] Put common autoload code into AutoLoad() function   Simon Glass
• [U-Boot] [PATCH 5/5] Allow tftp server to be different from bootp/dhcp server   Simon Glass
• [U-Boot] [PATCH 5/5] Allow tftp server to be different from bootp/dhcp server   Simon Glass
• [U-Boot] [PATCH 4/5] Put common autoload code into AutoLoad() function   Simon Glass
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH v2 3/5] Add documentation for USB Host Networking   Simon Glass
• [U-Boot] [PATCH v2 4/5] Put common autoload code into AutoLoad() function   Simon Glass
• [U-Boot] [PATCH v2 5/5] Allow tftp server to be different from bootp/dhcp server   Simon Glass
• [U-Boot] [PATCH] Fix bad padding of bootp request packet   Simon Glass
• [U-Boot] [PATCH 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH 5/5] Allow tftp server to be different from bootp/dhcp server   Simon Glass
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v3 1/4] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v3 1/4] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v3 1/4] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v3 2/4] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH v3 3/4] Add documentation for USB Host Networking   Simon Glass
• [U-Boot] [PATCH v3 4/4] Put common autoload code into auto_load() function   Simon Glass
• [U-Boot] [PATCH v2 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH] Fix bad padding of bootp request packet   Simon Glass
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v2 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v3 1/4] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v4 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH v4 3/5] Add documentation for USB Host Networking   Simon Glass
• [U-Boot] [PATCH v4 4/5] Put common autoload code into auto_load() function   Simon Glass
• [U-Boot] [PATCH v4 5/5] usbeth: asix: Do a fast init if link already established   Simon Glass
• [U-Boot] [PATCH v4 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH v5 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Simon Glass
• [U-Boot] [PATCH v5 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH v5 3/5] Add documentation for USB Host Networking   Simon Glass
• [U-Boot] [PATCH v5 4/5] Put common autoload code into auto_load() function   Simon Glass
• [U-Boot] [PATCH v5 5/5] usbeth: asix: Do a fast init if link already established   Simon Glass
• [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation   Simon Glass
• [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation   Simon Glass
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH v2 00/10] armv7: cache maintenance operations   Simon Glass
• [U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet   Simon Glass
• [U-Boot] [PATCH 0/7] Tegra2: USB Host Support patch series   Simon Glass
• [U-Boot] [PATCH 1/7] Tegra2: Add bitfield access macros   Simon Glass
• [U-Boot] [PATCH 2/7] Tegra2: Add microsecond timer functions   Simon Glass
• [U-Boot] [PATCH 3/7] Tegra2: Add more clock support   Simon Glass
• [U-Boot] [PATCH 4/7] Tegra2: add additional pin multiplexing features   Simon Glass
• [U-Boot] [PATCH 5/7] Tegra2: Use clock and pinmux functions to simplify code   Simon Glass
• [U-Boot] [PATCH 7/7] Tegra2: config: enable network booting   Simon Glass
• [U-Boot] [PATCH 6/7] Tegra2: Add USB support   Simon Glass
• [U-Boot] Issue with ehci-pci on MPC8548   Sandeep Kumar Gopalpet
• [U-Boot] [PATCH 1/1] at91: reworked support for meesc board   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: reworked support for otc570 board   Daniel Gorsulowski
• [U-Boot] [PATCH-V2 1/2] at91: reworked support for meesc board   Daniel Gorsulowski
• [U-Boot] [PATCH-V2 2/2] at91: reworked support for otc570 board   Daniel Gorsulowski
• [U-Boot] [PATCH-V2 2/2] at91: reworked support for otc570 board   Daniel Gorsulowski
• [U-Boot] [PATCH 0/9] Update support for CM-T35   Igor Grinberg
• [U-Boot] [PATCH 1/9] OMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file scope   Igor Grinberg
• [U-Boot] [PATCH 2/9] OMAP3: CM-T35: update config   Igor Grinberg
• [U-Boot] [PATCH 3/9] OMAP3: CM-T35: update board files header information   Igor Grinberg
• [U-Boot] [PATCH 4/9] OMAP3: CM-T35: update MAINTAINERS file   Igor Grinberg
• [U-Boot] [PATCH 5/9] OMAP3: CM-T35: add MMC1 pinmux   Igor Grinberg
• [U-Boot] [PATCH 6/9] OMAP3: CM-T35: fix mmc   Igor Grinberg
• [U-Boot] [PATCH 7/9] OMAP3: CM-T35: remove redundand i2c initialization   Igor Grinberg
• [U-Boot] [PATCH 8/9] OMAP3: CM-T35: enable the green LED   Igor Grinberg
• [U-Boot] [PATCH 9/9] OMAP3: CM-T35: Add support for CM-T3730   Igor Grinberg
• [U-Boot] [PATCH 0/9] Update support for CM-T35   Igor Grinberg
• [U-Boot] [PATCH 0/9] Update support for CM-T35   Igor Grinberg
• [U-Boot] Update and Cut down mach types   Igor Grinberg
• [U-Boot] [PATCH] led: correct off/on locations in structure   Igor Grinberg
• [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video   Igor Grinberg
• [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor   Igor Grinberg
• [U-Boot] Update and Cut down mach types   Igor Grinberg
• [U-Boot] [PATCH 1/2] Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition   Shawn Guo
• [U-Boot] [PATCH 2/2] Fix CONFIG_OF_LIBFDT redefined warning   Shawn Guo
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Anatolij Gustschin
• [U-Boot] subscribe me to this list   Anatolij Gustschin
• [U-Boot] Pull request for u-boot-video?   Anatolij Gustschin
• [U-Boot] Pull request for u-boot-video?   Anatolij Gustschin
• [U-Boot] [PATCH v5] powerpc: use 'video-mode' environment variable to configure DIU   Anatolij Gustschin
• [U-Boot] Pull request for u-boot-video?   Anatolij Gustschin
• [U-Boot] [PATCH v2] cfb_console: fix RLE bitmap drawing code   Anatolij Gustschin
• [U-Boot] [PATCH v2] cfb_console: fix RLE bitmap drawing code   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] video: parse the video-mode environment variable   Anatolij Gustschin
• [U-Boot] [PATCH v5] powerpc: use 'video-mode' environment variable to configure DIU   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH] miiphy: miiphyutil.c: fix compile warning   Anatolij Gustschin
• [U-Boot] [PATCH] common/cmd_mdio.c: fix compile warning   Anatolij Gustschin
• [U-Boot] (no subject)   DARY HARTSON
• [U-Boot] Job Offer Urgently.   MARRIOTT HOTEL
• [U-Boot] Automated Cash Machine   Nik Hafzam
• [U-Boot] u-boot fails to build for powerpc with gcc 4.5.1   Darren Hart
• [U-Boot] SPI - cs validity   Hebbar, Gururaja
• [U-Boot] SPI - cs validity   Hebbar, Gururaja
• [U-Boot] How does u-boot know where to put its start code?   Hebbar, Gururaja
• [U-Boot] wassup   Sagar Heroorkar
• [U-Boot] Web Mail Technical Services.   Hieu, Bui Minh
• [U-Boot] Dear Email Account Owner Notice‏‏!!!   Hines-Smith, Sharon
• [U-Boot] [PATCH] Provide pr_debug() and pr_info().   Alexander Holler
• [U-Boot] [PATCH] Provide pr_debug() and pr_info().   Alexander Holler
• [U-Boot] [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor.   Alexander Holler
• [U-Boot] [PATCH 1/3] OMAP3: Change some USB related MUX settings to values used by the kernel.   Alexander Holler
• [U-Boot] [PATCH 2/3] OMAP3: Add support for DPLL5 (usbhost)   Alexander Holler
• [U-Boot] [PATCH 3/3] omap3_beagle: enable EHCI and USB storage.   Alexander Holler
• [U-Boot] [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor.   Alexander Holler
• [U-Boot] [PATCH 1/3] OMAP3: Change some USB related MUX settings to values used by the kernel.   Alexander Holler
• [U-Boot] [PATCH 2/3] OMAP3: Add support for DPLL5 (usbhost)   Alexander Holler
• [U-Boot] [PATCH 3/3] omap3_beagle: enable EHCI and USB storage.   Alexander Holler
• [U-Boot] [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor.   Alexander Holler
• [U-Boot] [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor.   Alexander Holler
• [U-Boot] [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor.   Alexander Holler
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Jason Hui
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Jason Hui
• [U-Boot] [PATCH 1/1] mx5: drop boot cause code from board support code   Jason Hui
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Jason Hui
• [U-Boot] (no subject)   Norton Financial Loan Company Inc
• [U-Boot] [PATCH] sh: sh7785lcr: Update BSC of USB area   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3] Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS   Nobuhiro Iwamatsu
• [U-Boot] Contact DHL for the delivery of a cheque   Mrs. Emilly Olivier Jacjman
• [U-Boot] "YOUR EMAIL I ,D WON £1,000,000.00.GBP"   Mrs.Elizabeth James
• [U-Boot] DreamPlug bootloader replacement   Jason
• [U-Boot] DreamPlug bootloader replacement   Jason
• [U-Boot] [patch 0/6] Update patchset for some Freescale ColdFire boards   Jason Jin
• [U-Boot] [PATCH 1/6] Fix the configuration broken for ColdFire boards.   Jason Jin
• [U-Boot] [PATCH 2/6] Fix the CPP flags for toolchain 4.4.1 on ColdFire boards.   Jason Jin
• [U-Boot] [PATCH 3/6] Env and lds file clean up for ColdFire M5445x and M547x/8x boards.   Jason Jin
• [U-Boot] [PATCH 4/6] Clean up lds files for some ColdFire nommu chips   Jason Jin
• [U-Boot] [PATCH 5/6] Enable the dm9000 on ColdFire 5253DEMO board.   Jason Jin
• [U-Boot] [PATCH 6/6] Disable the NFS define for 52277 board.   Jason Jin
• [U-Boot] [PATCH 0/9] Patch set for some Freescale ColdFire boards   Jason Jin
• [U-Boot] [PATCH 1/9] Fix the configuration broken for ColdFire boards.   Jason Jin
• [U-Boot] [PATCH V2 2/9] ColdFire: Change the way to set platform CPP flags   Jason Jin
• [U-Boot] [PATCH V2 3/9] Env and lds file clean up for ColdFire M5445x and M547x/8x boards.   Jason Jin
• [U-Boot] [PATCH 4/9] Clean up lds files for some ColdFire nommu chips   Jason Jin
• [U-Boot] [PATCH V2 5/9] Enable the dm9000 on ColdFire 5253DEMO board.   Jason Jin
• [U-Boot] [PATCH 6/9] Disable the NFS define for 52277 board.   Jason Jin
• [U-Boot] [PATCH 7/9] ColdFire:Add mb for 5253 dram initialization   Jason Jin
• [U-Boot] [PATCH 8/9] Change the env settings for u-boot update   Jason Jin
• [U-Boot] [PATCH 9/9] sync the buffer descriptor IO for coldfire FEC   Jason Jin
• [U-Boot] [PATCH] at91sam9260ek: pull up on gpio   Prchal Jiří
• [U-Boot] LED LIGHTING   Johan
• [U-Boot] [PATCH] Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE comments   Michael Jones
• [U-Boot] [PATCH 1/2] ARMV7: Adding support for Samsung SMDKV310 Board   Minkyu Kang
• [U-Boot] [PATCH] S5P: mmc: Resolved interrupt error during mmc_init   Minkyu Kang
• [U-Boot] [PATCH V6 1/4] SMDK2410: activate ARM relocation feature   Minkyu Kang
• [U-Boot] [PATCH V6 2/4] SMDK2410: remove unneeded config.mk   Minkyu Kang
• [U-Boot] [PATCH V6 3/4] SMDK2410: use the CFI driver (and remove the old one)   Minkyu Kang
• [U-Boot] [PATCH V6 4/4] SMDK2410: various cleanup/code style fixes   Minkyu Kang
• [U-Boot] [PATCH V3] update VCMA9 port   Minkyu Kang
• [U-Boot] Net: smc911x: Invalid chip endian 0x04980498 No ethernet found.   Minkyu Kang
• [U-Boot] [PATCH 1/2] ARMV7: Adding support for Samsung SMDKV310 Board   Minkyu Kang
• [U-Boot] [PATCH 0/2] SROM config code moved to s5p-common directory   Minkyu Kang
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Minkyu Kang
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Minkyu Kang
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Minkyu Kang
• [U-Boot] [PATCH] S5P:SROM config code moved to s5p-common directory   Minkyu Kang
• [U-Boot] [PATCH] S5P:SROM config code moved to s5p-common directory   Minkyu Kang
• [U-Boot] [PATCH v2] S5P: GPIO Macro Values Corrected.   Minkyu Kang
• [U-Boot] [PATCH v3] Don't grab memory for LCD if FB address is defined   Minkyu Kang
• [U-Boot] [PATCH v4] Don't grab memory for LCD if FB address is defined   Minkyu Kang
• [U-Boot] [PATCH 1/2] ARMV7: Adding support for Samsung SMDKV310 Board   Chander Kashyap
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Chander Kashyap
• [U-Boot] [PATCH 0/2] SROM config code moved to s5p-common directory   Chander Kashyap
• [U-Boot] [PATCH 1/2] S5P: SROM config code moved to common directory s5p-common   Chander Kashyap
• [U-Boot] [PATCH 2/2] S5PC1XX: Refers to SROM config code in s5p-common directory. Header file renamed from smc.h to sromc.h.   Chander Kashyap
• [U-Boot] [PATCH] S5P:SROM config code moved to s5p-common directory   Chander Kashyap
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Chander Kashyap
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Chander Kashyap
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Chander Kashyap
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Chander Kashyap
• [U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.   Chander Kashyap
• [U-Boot] [PATCH v2] S5P: GPIO Macro Values Corrected.   Chander Kashyap
• [U-Boot] [PATCH v2 0/2] SMDKV310 Board Support   Chander Kashyap
• [U-Boot] [PATCH v2 1/2] ARMV7: Add support for Samsung SMDKV310 Board   Chander Kashyap
• [U-Boot] [PATCH v2 2/2] ARMV7: MMC SPL Boot support for SMDKV310 board   Chander Kashyap
• [U-Boot] Renaming files on an SD card   D Kesselring
• [U-Boot] Renaming files on an SD card   D Kesselring
• [U-Boot] Booting kernel from NAND flash on AT91SAM9 custom board using fsload   Nicholas Kinar
• [U-Boot] Booting kernel from NAND flash on AT91SAM9 custom board using fsload   Nicholas Kinar
• [U-Boot] Booting kernel from NAND flash on AT91SAM9 custom board using fsload   Nicholas Kinar
• [U-Boot] [PATCH 1/2] Implementation of a auto-update hash-check- if image has new hash, update flash, otherwise boot device immediately   Christoph Koenig
• [U-Boot] [PATCH 2/2] Implementation of a bootloader area protection during auto-update (new CONFIG_SYSTEM_START_ADDR necessary)   Christoph Koenig
• [U-Boot] Request For Affiliation   Mrs.Helena Kolb
• [U-Boot] [PATCH] BeagleBoard updates rebased on u-boot-ti and debugged   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: fixed typo in typecast   Jason Kridner
• [U-Boot] [PATCH] Corrected LED name match finding   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: fix LED 0/1 in driver   Jason Kridner
• [U-Boot] [PATCH] led: added cmd_led to Makefile   Jason Kridner
• [U-Boot] [PATCH] led: correct off/on locations in structure   Jason Kridner
• [U-Boot] [PATCH] led: remove trailing whitespace   Jason Kridner
• [U-Boot] [PATCH] led: loop through all leds   Jason Kridner
• [U-Boot] [PATCH] led: fixup help/usage   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: Pin mux initialization glitch fix   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: Switch default console from ttyS2 to ttyO2   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: Remove omapfb.debug=y from Beagle and Overo env settings   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: reduce BOOTDELAY to 3   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: change default resolution to VGA   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: don't suck in blank line   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: make mtest run   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: increase command-line functionality   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: load kernel via MMC ext2   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: add optargs/buddy/camera   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: add ramboot   Jason Kridner
• [U-Boot] [PATCH v2] BeagleBoard: Added userbutton command   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: use the USERBUTTON command   Jason Kridner
• [U-Boot] [PATCH] video: DSS makefile update   Jason Kridner
• [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: config: enable DSS   Jason Kridner
• [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video   Jason Kridner
• [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor   Jason Kridner
• [U-Boot] [PATCH] TWL4030/BeagleBoard: Added hub power enable   Jason Kridner
• [U-Boot] [beagleboard] Re: [PATCH] Add 'led' command   Jason Kridner
• [U-Boot] [beagleboard] Re: [PATCH] Add 'led' command   Jason Kridner
• [U-Boot] Saving environment question   Charles Krinke
• [U-Boot] jffs2 & ubi rootfs in nor flash   Charles Krinke
• [U-Boot] Searching for JFFS2 understanding.   Charles Krinke
• [U-Boot] Searching for JFFS2 understanding.   Charles Krinke
• [U-Boot] Searching for JFFS2 understanding.   Charles Krinke
• [U-Boot] is any bug in cp?   Charles Krinke
• [U-Boot] UEC phy not working on first try   Charles Krinke
• [U-Boot] [GIT PULL] MIPS patches   Shinya Kuribayashi
• [U-Boot] [MIPS 0/2] Trivial cleanups   Shinya Kuribayashi
• [U-Boot] [PATCH 1/2] MIPS: Remove mips_cache_lock() feature   Shinya Kuribayashi
• [U-Boot] [PATCH 2/2] MIPS: Coding style cleanups on common assembly files   Shinya Kuribayashi
• [U-Boot] [PATCH 2/2] MIPS: Coding style cleanups on common assembly files   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Introduce --gc-sections for MIPS   Shinya Kuribayashi
• [U-Boot] cannot ping from IMX53QSB   Shlomo Kut
• [U-Boot] Meaning of CONFIG_SYS_BOOTMAPSZ/cns3xxx port to v2009.01   Christoph König
• [U-Boot] JOB APPLICATION   NIPPON OIL EXPLORATION LTD
• [U-Boot] Your mailbox has exceeded the storage limit   Lewis, Maggie
• [U-Boot] Pull request: u-boot-fdt   Grant Likely
• [U-Boot] [PATCH] ftsmc020: enhance for features and asm support.   Macpaul Lin
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Macpaul Lin
• [U-Boot] [PATCH v7 02/10] nds32: add NDS32 support into common header file   Macpaul Lin
• [U-Boot] [PATCH v7 03/10] nds32/core N1213: NDS32 N12 core family N1213   Macpaul Lin
• [U-Boot] [PATCH v7 04/10] nds32/ag101: dev offset header of SoC ag101   Macpaul Lin
• [U-Boot] [PATCH v7 05/10] nds32/ag101: lowlevel_init.S of ag101   Macpaul Lin
• [U-Boot] [PATCH v7 06/10] nds32/ag101: cpu and init funcs of SoC ag101   Macpaul Lin
• [U-Boot] [PATCH v7 07/10] nds32/lib: add generic funcs in NDS32 lib   Macpaul Lin
• [U-Boot] [PATCH v7 08/10] nds32: standalone support   Macpaul Lin
• [U-Boot] [PATCH v7 09/10] nds32: common bdinfo, bootm, image support   Macpaul Lin
• [U-Boot] [PATCH v7 10/10] adp-ag101: add board adp-ag101 support   Macpaul Lin
• [U-Boot] [PATCH v7 05/10] nds32/ag101: lowlevel_init.S of ag101   Macpaul Lin
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Macpaul Lin
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Macpaul Lin
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   Macpaul Lin
• [U-Boot] [PATCH v8 01/10] nds32: add header files support for nds32   Macpaul Lin
• [U-Boot] [PATCH v8 02/10] nds32: add NDS32 support into common header file   Macpaul Lin
• [U-Boot] [PATCH v8 03/10] nds32/core N1213: NDS32 N12 core family N1213   Macpaul Lin
• [U-Boot] [PATCH v8 04/10] nds32/ag101: dev offset header of SoC ag101   Macpaul Lin
• [U-Boot] [PATCH v8 05/10] nds32/ag101: lowlevel_init.S of ag101   Macpaul Lin
• [U-Boot] [PATCH v8 06/10] nds32/ag101: cpu and init funcs of SoC ag101   Macpaul Lin
• [U-Boot] [PATCH v8 07/10] nds32/lib: add generic funcs in NDS32 lib   Macpaul Lin
• [U-Boot] [PATCH v8 08/10] nds32: standalone support   Macpaul Lin
• [U-Boot] [PATCH v8 09/10] nds32: common bdinfo, bootm, image support   Macpaul Lin
• [U-Boot] [PATCH v8 10/10] adp-ag101: add board adp-ag101 support   Macpaul Lin
• [U-Boot] [PATCH v4] ftwdt010_wdt: support faraday ftwdt010 watchdog   Macpaul Lin
• [U-Boot] [PATCH] ftwdt010_wdt: move header to include/faraday and enhance   Macpaul Lin
• [U-Boot] [PATCH v2 1/2] cmd_ide: enhance new feature "CONFIG_IDE_AHB"   Macpaul Lin
• [U-Boot] [PATCH v2 2/2] ftide020: add faraday ide ahb controller   Macpaul Lin
• [U-Boot] [arm] a320evb related fix   Macpaul Lin
• [U-Boot] [arm] a320evb related fix   Macpaul Lin
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH v2 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Macpaul Lin
• [U-Boot] [PATCH v3 1/4] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller   Macpaul Lin
• [U-Boot] [PATCH v3 2/4] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v3 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Macpaul Lin
• [U-Boot] [PATCH v3 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd   Macpaul Lin
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH v2] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH V8 1/6] pxa: move i2c driver to the common place   Macpaul Lin
• [U-Boot] [PATCH] mtd/spi/macronix.c: add MX25L4005 and MX25L8005   Macpaul Lin
• [U-Boot] [PATCH v2 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Macpaul Lin
• [U-Boot] [PATCH v2 3/4] ftsdmc020: move ftsdmc020.h to include/faraday   Macpaul Lin
• [U-Boot] [PATCH] andes_spi: add andes_spi interface   Macpaul Lin
• [U-Boot] [PATCH] andes_spi: add andes_spi interface   Macpaul Lin
• [U-Boot] [PATCH v2] andes_spi: add andes_spi interface   Macpaul Lin
• [U-Boot] [PATCH v3] andes_spi: add andes_spi interface   Macpaul Lin
• [U-Boot] [PATCH v2] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH 1/2] cmd_ide: enhance new feature "CONFIG_IDE_AHB"   Macpaul Lin
• [U-Boot] [PATCH] ehci.h: replace usb root support from 2 to 5   Macpaul Lin
• [U-Boot] [PATCH] ehci.h: replace usb root support from 2 to 5   Macpaul Lin
• [U-Boot] [PATCH v2 1/2] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller   Macpaul Lin
• [U-Boot] [PATCH v2 2/2] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v2 2/4] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v3 1/2] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller   Macpaul Lin
• [U-Boot] [PATCH v3 2/2] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v3 2/2] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v4 1/2] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller   Macpaul Lin
• [U-Boot] [PATCH v4 2/2] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v4 2/2] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v5 1/2] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller   Macpaul Lin
• [U-Boot] [PATCH v5 2/2] ftsdmc021: add register definitions of ftsdmc021   Macpaul Lin
• [U-Boot] [PATCH v3] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH 1/4] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Macpaul Lin
• [U-Boot] [PATCH 1/4] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Macpaul Lin
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Macpaul Lin
• [U-Boot] 回覆: [PATCH v2] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH v2] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] [PATCH v3] cmd_nvedit.c: clean up with checkpatch   Macpaul Lin
• [U-Boot] Pull request: u-boot-arm/master   Macpaul Lin
• [U-Boot] [PATCH v3] cosmetic: cmd_bdinfo.c: clean up by using checkpatch.pl   Macpaul Lin
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Macpaul Lin
• [U-Boot] [PATCH v3 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd   Macpaul Lin
• [U-Boot] [PATCH v3 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd   Macpaul Lin
• [U-Boot] [PATCH] arm: a320: fix compile error caused by commit 00d10eb   Macpaul Lin
• [U-Boot] Pull request: u-boot-arm/master   Macpaul Lin
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Macpaul Lin
• [U-Boot] [PATCH] JFFS2: bug fix for summary support.   Baidu Liu
• [U-Boot] [PATCH] JFFS2: accelerate scanning.   Baidu Liu
• [U-Boot] [PATCH V2] JFFS2: bug fix for summary support.   Baidu Liu
• [U-Boot] [PATCH,V2] JFFS2: accelerate scanning.   Baidu Liu
• [U-Boot] [PATCH 1/7] JFFS2: Bug fix for summary support   Baidu Liu
• [U-Boot] [PATCH 2/7] JFFS2: Change allocated buffer size   Baidu Liu
• [U-Boot] [PATCH 3/7] JFFS2: Calculate buf_len before we read data from flash   Baidu Liu
• [U-Boot] [PATCH 4/7] JFFS2: Improve error checking   Baidu Liu
• [U-Boot] [PATCH 5/7] JFFS2: Change DEFAULT_EMPTY_SCAN_SIZE to 256 Bytes   Baidu Liu
• [U-Boot] [PATCH 6/7] JFFS2: scanning performance improvement   Baidu Liu
• [U-Boot] [PATCH 7/7] JFFS2: reduce number of read operations   Baidu Liu
• [U-Boot] [PATCH,V2] JFFS2: accelerate scanning.   Baidu Liu
• [U-Boot] [PATCH V2] JFFS2: bug fix for summary support.   Baidu Liu
• [U-Boot] [PATCH 1/7] JFFS2: Bug fix for summary support   Baidu Liu
• [U-Boot] [PATCH 3/7] JFFS2: Calculate buf_len before we read data from flash   Baidu Liu
• [U-Boot] [PATCH 3/7] JFFS2: Calculate buf_len before we read data from flash   Baidu Liu
• [U-Boot] [PATCH 4/7] JFFS2: Improve error checking   Baidu Liu
• [U-Boot] [PATCH 5/7] JFFS2: Change DEFAULT_EMPTY_SCAN_SIZE to 256 Bytes   Baidu Liu
• [U-Boot] [PATCH 6/7] JFFS2: scanning performance improvement   Baidu Liu
• [U-Boot] [PATCH 1/7] JFFS2: Bug fix for summary support   Baidu Liu
• [U-Boot] [PATCH 3/7] JFFS2: Calculate buf_len before we read data from flash   Baidu Liu
• [U-Boot] [PATCH 5/7] JFFS2: Change DEFAULT_EMPTY_SCAN_SIZE to 256 Bytes   Baidu Liu
• [U-Boot] [PATCH 1/1] fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2   Jason Liu
• [U-Boot] [PATCH 1/1] fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2   Jason Liu
• [U-Boot] [PATCH 1/1] fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2   Jason Liu
• [U-Boot] [PATCH] MX51: mx51evk: Use struct to access SRSR register instead of offset   Jason Liu
• [U-Boot] [PATCH V1 1/1] MX5: Keep L2 cache enabled before jump to kernel   Jason Liu
• [U-Boot] [PATCH 1/1] MX5: clock: Add clock config interface   Jason Liu
• [U-Boot] [PATCH 1/2] PMIC: Add dialog pmic support   Jason Liu
• [U-Boot] [PATCH 2/2] MX53: loco: Add power init support   Jason Liu
• [U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH V3 1/2] MX5: factor out boot cause funciton to common code   Jason Liu
• [U-Boot] [PATCH V3 2/2] MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH V1 1/1] MX5: Keep L2 cache enabled before jump to kernel   Jason Liu
• [U-Boot] [PATCH V4 1/2] MX5: factor out boot cause funciton to common code   Jason Liu
• [U-Boot] [PATCH V4 2/2] MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH V4 1/2] MX5: factor out boot cause funciton to common code   Jason Liu
• [U-Boot] [PATCH V4 2/2] MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH 1/1] mx5: drop boot cause code from board support code   Jason Liu
• [U-Boot] [PATCH V5 1/2] MX5: factor out boot cause funciton to common code   Jason Liu
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH V3 1/2] MX5: factor out boot cause funciton to common code   Jason Liu
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH 1/1] mx5: drop boot cause code from board support code   Jason Liu
• [U-Boot] [PATCH V2 1/1] mx5: board: code clean up for checkboard code   Jason Liu
• [U-Boot] [PATCH V6 1/3] MX5: clock: Add clock config interface   Jason Liu
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Jason Liu
• [U-Boot] [PATCH V6 3/3] MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH V5 2/2] MX53: support for freescale MX53LOCO board   Jason Liu
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Jason Liu
• [U-Boot] [PATCH] JFFS2: bug fix for summary support.   Leo Liu
• [U-Boot] [PATCH] JFFS2: accelerate scanning.   Leo Liu
• [U-Boot] [PATCH v6 4/7] jz4740 nand driver   Xiangfu Liu
• [U-Boot] [PATCH v6 4/7] jz4740 nand driver   Xiangfu Liu
• [U-Boot] Loan Offer   Jordan Global Loan
• [U-Boot] Loan Offer...   Norton Finance Loan
• [U-Boot] [PATCH] Keymile boards mainlining, part 2   Valentin Longchamp
• [U-Boot] [PATCH] lib, vsprintf: introduce strict_strtoul   Valentin Longchamp
• [U-Boot] [PATCH] powerpc/km82xx: add DIP switch detection   Valentin Longchamp
• [U-Boot] [PATCH] km/common: remove hdlc_enet implementation   Valentin Longchamp
• [U-Boot] [PATCH] powerpc/km82xx: cleanup coding style for mgcoge.c   Valentin Longchamp
• [U-Boot] [PATCH] powerpc/km82xx: rename mgcoge files to km82xx   Valentin Longchamp
• [U-Boot] [PATCH] powerpc/km82xx: move SDRAM config to board config   Valentin Longchamp
• [U-Boot] [PATCH] powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual   Valentin Longchamp
• [U-Boot] [PATCH] powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support   Valentin Longchamp
• [U-Boot] [PATCH] poweprc/km82xx: add board specific environment variable   Valentin Longchamp
• [U-Boot] [PATCH] arm/km: add addbootcount environment variable   Valentin Longchamp
• [U-Boot] [PATCH] cramfs: make cramfs usable without a NOR flash   Valentin Longchamp
• [U-Boot] [PATCH] i2c, soft_i2c: deblock bus if switching to another i2c bus   Valentin Longchamp
• [U-Boot] [PATCH] km/common: fix initial_boot_bank for bootpackages   Valentin Longchamp
• [U-Boot] [PATCH] common/hush: make get_local_var visible for other users   Valentin Longchamp
• [U-Boot] [PATCH] km/common: implement setboardid as a command   Valentin Longchamp
• [U-Boot] [PATCH] km/common: replace env var checkboardidlist by function   Valentin Longchamp
• [U-Boot] [PATCH] km/common: add pnvramsize to default environment   Valentin Longchamp
• [U-Boot] [PATCH] km/common: fix coding style issues in generic header   Valentin Longchamp
• [U-Boot] [PATCH] km/common: simplify default environment   Valentin Longchamp
• [U-Boot] [PATCH] Keymile boards mainlining, part 2   Valentin Longchamp
• [U-Boot] [PATCH] Keymile boards mainlining, part 2   Valentin Longchamp
• [U-Boot] [PATCH 00/30] Keymile boards mainlining, part 2 (resend)   Valentin Longchamp
• [U-Boot] [PATCH 01/30] lib, vsprintf: introduce strict_strtoul   Valentin Longchamp
• [U-Boot] [PATCH 02/30] powerpc/km82xx: add DIP switch detection   Valentin Longchamp
• [U-Boot] [PATCH 03/30] km/common: remove hdlc_enet implementation   Valentin Longchamp
• [U-Boot] [PATCH 04/30] powerpc/km82xx: cleanup coding style for mgcoge.c   Valentin Longchamp
• [U-Boot] [PATCH 05/30] powerpc/km82xx: rename mgcoge files to km82xx   Valentin Longchamp
• [U-Boot] [PATCH 06/30] powerpc/km82xx: move SDRAM config to board config   Valentin Longchamp
• [U-Boot] [PATCH 07/30] powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual   Valentin Longchamp
• [U-Boot] [PATCH 08/30] powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support   Valentin Longchamp
• [U-Boot] [PATCH 09/30] poweprc/km82xx: add board specific environment variable   Valentin Longchamp
• [U-Boot] [PATCH 10/30] arm/km: add addbootcount environment variable   Valentin Longchamp
• [U-Boot] [PATCH 11/30] arm/km: remove last_stage_init and unneeded printouts   Valentin Longchamp
• [U-Boot] [PATCH 12/30] arm/km: add CRAMFS support for keymile boards   Valentin Longchamp
• [U-Boot] [PATCH 13/30] arm/km: add mkimage config file for uart download   Valentin Longchamp
• [U-Boot] [PATCH 14/30] arm/km: add BootROM config files for memphis SDRAM   Valentin Longchamp
• [U-Boot] [PATCH 15/30] arm/km: disable ls (through jffs2 support)   Valentin Longchamp
• [U-Boot] [PATCH 16/30] arm/km: add second serial interface for kirkwood   Valentin Longchamp
• [U-Boot] [PATCH 17/30] cramfs: make cramfs usable without a NOR flash   Valentin Longchamp
• [U-Boot] [PATCH 18/30] i2c: add i2c deblock sequence before and after every mux config   Valentin Longchamp
• [U-Boot] [PATCH 19/30] i2c, soft_i2c: deblock bus if switching to another i2c bus   Valentin Longchamp
• [U-Boot] [PATCH 20/30] km/common: fix initial_boot_bank for bootpackages   Valentin Longchamp
• [U-Boot] [PATCH 21/30] common/hush: make get_local_var visible for other users   Valentin Longchamp
• [U-Boot] [PATCH 22/30] km/common: implement setboardid as a command   Valentin Longchamp
• [U-Boot] [PATCH 23/30] km/common: replace env var checkboardidlist by function   Valentin Longchamp
• [U-Boot] [PATCH 24/30] km/common: add pnvramsize to default environment   Valentin Longchamp
• [U-Boot] [PATCH 25/30] km/common: fix coding style issues in generic header   Valentin Longchamp
• [U-Boot] [PATCH 26/30] arm, powerpc, keymile boards: move keymile specific header in subdir   Valentin Longchamp
• [U-Boot] [PATCH 27/30] km/common: simplify default environment   Valentin Longchamp
• [U-Boot] [PATCH 28/30] arm/km: rename mgcoge2un to mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH 29/30] arm/km: change default settings for egiga on mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH 30/30] arm/km: update mgcoge3un board support   Valentin Longchamp
• [U-Boot] [PATCH] arm/km: add mkimage config file for uart download   Valentin Longchamp
• [U-Boot] [PATCH] Keymile boards mainlining, part 2   Valentin Longchamp
• [U-Boot] [PATCH] Strip dead code on omap3 devices   Charles Manning
• [U-Boot] [PATCH] Strip dead code on omap3 devices   Charles Manning
• [U-Boot] Fix for overlapping sections?   Charles Manning
• [U-Boot] [PATCH] nand/spl: Assuming a static nand page size to reduce code size   McClintock Matthew-B29882
• [U-Boot] UEC phy not working on first try   DUNDA Matthias
• [U-Boot] UEC phy not working on first try   DUNDA Matthias
• [U-Boot] UEC phy not working on first try   DUNDA Matthias
• [U-Boot] [PATCH] nand/spl: Assuming a static nand page size to reduce code size   Matthew McClintock
• [U-Boot] [PATCH v1 1/2] powerpc/85xx: rename NAND prefixes to CONFIG_SYS   Matthew McClintock
• [U-Boot] [PATCH v1 2/2] nand/spl: Assuming a static nand page size to reduce code size   Matthew McClintock
• [U-Boot] [PATCH] powerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI is not set   Matthew McClintock
• [U-Boot] Contact Mr. Thomas Hillary on (bmwdpt211 at shqiptar.eu)   Shirley McGough
• [U-Boot] [Nios] Pull Request   Scott McNutt
• [U-Boot] [PATCH v2 1/2] avr32: rename memory-map.h -> hardware.h   Reinhard Meyer
• [U-Boot] [PATCH v2 2/2] avr32: fixup definitions to ATMEL_BASE_xxx   Reinhard Meyer
• [U-Boot] [PATCH 0/15] ATMEL rework   Reinhard Meyer
• [U-Boot] [PATCH alternate V3] at91rm9200: fix lowlevel_init() SMRDATA size   Reinhard Meyer
• [U-Boot] [Patch ARM/AT91] remove __attribute__ ((packed)) in at91 headers   Reinhard Meyer
• [U-Boot] U-Boot support for board(s) meesc, otc570   Reinhard Meyer
• [U-Boot] [PATCH 1/2] at91: fixed at91sam9263 system file   Reinhard Meyer
• [U-Boot] [PATCH 2/2] cpu9260: update board support   Reinhard Meyer
• [U-Boot] [PATCH] pm9g45_v1.3: make ethernet works   Reinhard Meyer
• [U-Boot] [PATCH v3] Add support for Bluewater Systems Snapper 9260 and 9G20 modules   Reinhard Meyer
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Reinhard Meyer
• [U-Boot] [PATCH 1/2] Fix timer usage of the Atmel SPI dataflash driver   Reinhard Meyer
• [U-Boot] [PATCH 1/4] atmel_dataflash: remove use of get_timer_masked   Reinhard Meyer
• [U-Boot] [PATCH 2/3] avr32: fix linking   Reinhard Meyer
• [U-Boot] [PATCH 00/15] [REWORK AVR32/AT91] additional changes for avr32   Reinhard Meyer
• [U-Boot] [PATCH 00/15] [REWORK AVR32/AT91] additional changes for avr32   Reinhard Meyer
• [U-Boot] [PATCH-V2 1/2] at91: reworked support for meesc board   Reinhard Meyer
• [U-Boot] [PATCH-V2 2/2] at91: reworked support for otc570 board   Reinhard Meyer
• [U-Boot] [PATCH] avr32: add ATAG_BOARDINFO   Reinhard Meyer
• [U-Boot] [PATCH 00/15] [REWORK AVR32/AT91] additional changes for avr32   Reinhard Meyer
• [U-Boot] Update and Cut down mach types   Reinhard Meyer
• [U-Boot] Account Alert Confirmation.   Elena Mihailescu
• [U-Boot] [PATCH] Only build fw_printenv if we have mtd/mtd-user.h   Loïc Minier
• [U-Boot] [PATCH 1/3] ARM: don't panic if no flash is there   Loïc Minier
• [U-Boot] [PATCH] fsl-ddr: Fix mixed-case macro names   Kyle Moffett
• [U-Boot] [PATCH 2/5] e1000: Restructure and streamline PCI device probing   Moffett, Kyle D
• [U-Boot] [PATCH 4/5] e1000: New "e1000" commands for SPI EEPROM management   Moffett, Kyle D
• [U-Boot] [PATCH 4/5] e1000: New "e1000" commands for SPI EEPROM management   Moffett, Kyle D
• [U-Boot] [PATCHv2] powerpc: Minimal private libgcc to build on Debian   Moffett, Kyle D
• [U-Boot] Notification   Western Union Money
• [U-Boot] Online accredited degrees (4/4/2011)   Robert Moore
• [U-Boot] Health insurance (4/12/2011)   Robert Moore
• [U-Boot] Casino Email Prize Award.   Mrs.Sonia Matilla,
• [U-Boot] [PATCH V4] update VCMA9 port   David Müller
• [U-Boot] [PATCH V4 1/4] VCMA9: activate ARM relocation feature   David Müller
• [U-Boot] [PATCH V4 2/4] VCMA9: remove unneeded config.mk   David Müller
• [U-Boot] [PATCH V4 3/4] VCMA9: use the CFI driver (and remove the old one)   David Müller
• [U-Boot] [PATCH V4 4/4] VCMA9: various cleanups/code style fixes   David Müller
• [U-Boot] [PATCH] mpc83xx fdt: do not adjust clock frequency of external UARTs   David Müller
• [U-Boot] Hello   Mis Norna
• [U-Boot] Status of ethernet support for Beagleboard xM ?   Bids O'Bids
• [U-Boot] Status of ethernet support for Beagleboard xM ?   Bids O'Bids
• [U-Boot] PAYMENT SENT!!   WESTERN UNION MONEY OFFICE
• [U-Boot] Payment sent!!!   WESTERN UNION MONEY OFFICE
• [U-Boot] Spam- Payment sent!!!   WESTERN UNION MONEY OFFICE
• [U-Boot] Payment sent!!!   WESTERN UNION MONEY OFFICE
• [U-Boot] YOUR FIRST $5000.00USD FROM WESTERN UNION   Western Union Head Office
• [U-Boot] pick up 5000USD from western union   Western Union Money Transfer Office
• [U-Boot] [U-Boot-Users] U-Boot WinCE booting support?   Balaji P
• [U-Boot] RE   PEPSI BOTTLING COMPANY PLC
• [U-Boot] RE   PEPSI BOTTLING COMPANY PLC
• [U-Boot] Net: smc911x: Invalid chip endian 0x04980498 No ethernet found.   Sung Hee Park
• [U-Boot] [PATCH] BeagleBoard: Added LED driver   Paulraj, Sandeep
• [U-Boot] [PATCH v3] omap3_beagle: enable the use of a plain text file named uEnv.txt instead of boot.scr   Paulraj, Sandeep
• [U-Boot] [PATCH v3] OMAP3: BeagleBoard: Enable pullups on i2c2.   Paulraj, Sandeep
• [U-Boot] [PATCH v2] OMAP3: BeagleBoard: add xM rev B to ID table   Paulraj, Sandeep
• [U-Boot] [PATCH v2] OMAP3: BeagleBoard: add more expansionboard IDs   Paulraj, Sandeep
• [U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table   Paulraj, Sandeep
• [U-Boot] [Patch v1] ARMV7: AM3517/05: Add support for CraneBoard.   Paulraj, Sandeep
• [U-Boot] [PATCH 0/9] Update support for CM-T35   Paulraj, Sandeep
• [U-Boot] [PATCH v3] omap3_beagle: enable the use of a plain text file named uEnv.txt instead of boot.scr   Paulraj, Sandeep
• [U-Boot] Update and Cut down mach types   Paulraj, Sandeep
• [U-Boot] [PATCHv2 0/2] ARM: OMAP3: Revamp IGEP default configuration   Paulraj, Sandeep
• [U-Boot] [PATCH 3/3] omap3_beagle: enable EHCI and USB storage.   Paulraj, Sandeep
• [U-Boot] Update and Cut down mach types   Paulraj, Sandeep
• [U-Boot] [PATCH v4 1/4] ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX   Paulraj, Sandeep
• [U-Boot] [PATCH v4 3/4] ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions   Paulraj, Sandeep
• [U-Boot] [PATCH v4 2/4] ARMV7: OMAP3: Cleanup extern variables in mem.c   Paulraj, Sandeep
• [U-Boot] [PATCH v4 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Paulraj, Sandeep
• [U-Boot] [PATCH v4 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board   Paulraj, Sandeep
• [U-Boot] [PATCH v5 0/2] Add DIG297 board and OMAP3 fixes   Paulraj, Sandeep
• [U-Boot] [PATCH] da850evm: fix NAND WSTROBE and TA timings   Paulraj, Sandeep
• [U-Boot] Please pull u-boot-ti/master   Paulraj, Sandeep
• [U-Boot] Expanding checkpatch for non-linux (specifically U-Boot) use   Joe Perches
• [U-Boot] Expanding checkpatch for non-linux (specifically U-Boot) use   Joe Perches
• [U-Boot] [RFC PATCH] checkpatch.pl: Add ability to ignore various messages   Joe Perches
• [U-Boot] Mainlining android fastboot support to upstream u-boot   Zach Pfeffer
• [U-Boot] Mainlining android fastboot support to upstream u-boot   Zach Pfeffer
• [U-Boot] Mainlining android fastboot support to upstream u-boot   Zach Pfeffer
• [U-Boot] [PATCH] mpc83xx: restrict UTMI PHY configuration to 831x parts   Kim Phillips
• [U-Boot] [PATCH v4 01/23] powerpc, mpc83xx: add missing functions to include/common.h   Kim Phillips
• [U-Boot] [PATCH v4 03/23] keymile: Fix Coding style issues for keymile boards.   Kim Phillips
• [U-Boot] [PATCH v4 04/23] ppc, arm: adapt keymile header   Kim Phillips
• [U-Boot] [PATCH v4 05/23] arm, ppc: rework environment variables for keymile boards   Kim Phillips
• [U-Boot] [PATCH v4 06/23] mpc832x: add support for the mpc8321 based suvd3 board   Kim Phillips
• [U-Boot] [PATCH v4 07/23] mpc832x: add support for mpc8321 based tuxa1 board   Kim Phillips
• [U-Boot] [PATCH v4 08/23] mpc832x: add support for mpc8321 based tuda1 board   Kim Phillips
• [U-Boot] [PATCH v4 12/23] keymile, 8321 boards: move common definitions to km8321-common.h   Kim Phillips
• [U-Boot] [PATCH v4 13/23] powerpc, 83xx: add kmsupx5 board support   Kim Phillips
• [U-Boot] [PATCH v4 16/23] ppc, 8321: cleanup tuxa1, tuda1 and suvd3 support   Kim Phillips
• [U-Boot] [PATCH v4 20/23] keymile, common: add setting of some environment variables   Kim Phillips
• [U-Boot] [PATCH v2] common: add a grepenv command   Kim Phillips
• [U-Boot] [PATCH v4 03/23] keymile: Fix Coding style issues for keymile boards.   Kim Phillips
• [U-Boot] [PATCH v3] common: add a grepenv command   Kim Phillips
• [U-Boot] env: fix env var autocompletion   Kim Phillips
• [U-Boot] [PATCH v4] common: add a grepenv command   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: restrict UTMI PHY configuration to 831x parts   Kim Phillips
• [U-Boot] [PATCH v4 01/23] powerpc, mpc83xx: add missing functions to include/common.h   Kim Phillips
• [U-Boot] [PATCH v2] lib/hashtable: fix env var autocompletion   Kim Phillips
• [U-Boot] [PATCH v5] common: add a grepenv command   Kim Phillips
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Kim Phillips
• [U-Boot] [PATCH v4 03/23] keymile: Fix Coding style issues for keymile boards.   Kim Phillips
• [U-Boot] [PATCH 2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Julian Pidancet
• [U-Boot] [STATUS] U-Boot v2011.03 released - Merge Window OPEN   Andy Pont
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Jon Povey
• [U-Boot] [RFC] skip area in flash/memory commands (cp, cmp, ...)   Andreas Pretzsch
• [U-Boot] [PATCH] gpio: generalize for all generic gpio providers   Andreas Pretzsch
• [U-Boot] [PATCH] Blackfin: cmd_gpio: allow port pins over 15   Andreas Pretzsch
• [U-Boot] [RFC] skip area in flash/memory commands (cp, cmp, ...)   Andreas Pretzsch
• [U-Boot] trigger automatic update (FIT image) from prompt instead of "updatefile" env variable   Andreas Pretzsch
• [U-Boot] [PATCH] gpio: generalize for all generic gpio providers   Andreas Pretzsch
• [U-Boot] [PATCH] gpio: check request result   Andreas Pretzsch
• [U-Boot] [RFC] skip area in flash/memory commands (cp, cmp, ...)   Andreas Pretzsch
• [U-Boot] trigger automatic update (FIT image) from prompt instead of "updatefile" env variable   Andreas Pretzsch
• [U-Boot] [RFC] skip area in flash/memory commands (cp, cmp, ...)   Andreas Pretzsch
• [U-Boot] [PATCH 0/2] update from FIT image: add optional address, new command fitupd   Andreas Pretzsch
• [U-Boot] [PATCH 1/2] automatic update from FIT image: add optional address parameter   Andreas Pretzsch
• [U-Boot] [PATCH 2/2] add command fitupd to run an update from a FIT image   Andreas Pretzsch
• [U-Boot] trigger automatic update (FIT image) from prompt instead of "updatefile" env variable   Andreas Pretzsch
• [U-Boot] Policy for checkpatch usage?   Andreas Pretzsch
• [U-Boot] RE Winner   Benz Promo
• [U-Boot] Your E-mail Have Just Been Awarded   Premier Oil Online Promo
• [U-Boot] Reply Immediately   Mr Cheung Pui
• [U-Boot] Reply Immediately   Mr Cheung Pui
• [U-Boot] subscribe me to this list   Ratheendran R
• [U-Boot] help for porting u-boot   Ratheendran R
• [U-Boot] ubi command in u-boot   Ratheendran R
• [U-Boot] [Patch v1] ARMV7: AM3517/05: Add support for CraneBoard.   Srinath R
• [U-Boot] PLEASE ACCEPT MY REGUEST   PLEASE ACCEPT MY REGUEST
• [U-Boot] P2020RDB/P1020RDB regression in 2011.03   Felix Radensky
• [U-Boot] [PATCH] powerpc/qoriq: Update USB mode device tree fixup   Mehresh Ramneek-B31383
• [U-Boot] Network Code Custodian ?   Raffaele Recalcati
• [U-Boot] [PATCH] S5P: mmc: Resolved interrupt error during mmc_init   Raffaele Recalcati
• [U-Boot] [PATCH] S5P: mmc: Resolved interrupt error during mmc_init   Raffaele Recalcati
• [U-Boot] [RFC 2/3][v4] mmc: SEND_OP_COND considers card capabilities (voltage)   Raffaele Recalcati
• [U-Boot] fw_printenv & fw_setenv for NAND partition   Amarendra Reddy
• [U-Boot] fw_setenv usage for multiple copies of U-Boot Environment Variables   Amarendra Reddy
• [U-Boot] fw_setenv usage for multiple copies of U-Boot Environment Variables   Amarendra Reddy
• [U-Boot] fw_printernv fw_setenv usage on redundant environment copies   Amarendra Reddy
• [U-Boot] [PATCH 6/9] cmd_sf: add handler for +len arg for erase command   Richard Retanubun
• [U-Boot] [PATCHv2 0/4] ST-Ericsson U8500 support   John Rigby
• [U-Boot] [PATCHv2 1/4] p101x: extra init for u8500   John Rigby
• [U-Boot] [PATCHv2 2/4] armv7: Add ST-Ericsson u8500 arch   John Rigby
• [U-Boot] [PATCHv2 3/4] I2C: add driver of st-ericsson u8500 i2c   John Rigby
• [U-Boot] [PATCHv2 4/4] armv7: Add support for ST-Ericsson U8500 href platform   John Rigby
• [U-Boot] [PATCHv2 0/4] ST-Ericsson U8500 support   John Rigby
• [U-Boot] [PATCHv3 0/4] ST-Ericsson U8500 support   John Rigby
• [U-Boot] [PATCHv3 1/4] Serial: p1011: new vendor init options   John Rigby
• [U-Boot] [PATCHv3 2/4] armv7: Add ST-Ericsson u8500 arch   John Rigby
• [U-Boot] [PATCHv3 3/4] I2C: Add driver for ST-Ericsson U8500 i2c   John Rigby
• [U-Boot] [PATCHv3 4/4] armv7: Add support for ST-Ericsson U8500 href platform   John Rigby
• [U-Boot] [PATCH] MMC: disable multiblock rw on old rev OMAP3 silicon   John Rigby
• [U-Boot] [PATCHv2] MMC: disable multiblock rw on old rev OMAP3 silicon   John Rigby
• [U-Boot] [PATCHv2 1/2] MMC: make b_max unconditional   John Rigby
• [U-Boot] [PATCHv2 2/2] mmc: omap_hsmmc.c: disable multiblock rw on old rev omap34xx silicon   John Rigby
• [U-Boot] [PATCHv3 2/2] MMC: omap_hsmmc.c: disable multiblock rw on old rev omap34xx silicon   John Rigby
• [U-Boot] [PATCHv4 1/4] Serial: p1011: new vendor init options   John Rigby
• [U-Boot] [PATCHv4 2/4] armv7: Add ST-Ericsson u8500 arch   John Rigby
• [U-Boot] [PATCHv4 3/4] I2C: Add driver for ST-Ericsson U8500 i2c   John Rigby
• [U-Boot] [PATCHv4 4/4] armv7: Add support for ST-Ericsson U8500 href platform   John Rigby
• [U-Boot] Mainlining android fastboot support to upstream u-boot   John Rigby
• [U-Boot] Mainlining android fastboot support to upstream u-boot   John Rigby
• [U-Boot] Mainlining android fastboot support to upstream u-boot   John Rigby
• [U-Boot] [PATCHv3 0/4] ST-Ericsson U8500 support   John Rigby
• [U-Boot] [PATCHv3 0/4] ST-Ericsson U8500 support   John Rigby
• [U-Boot] [PATCH v3 3/3] ARMV7: Vexpress: Add MMC support   John Rigby
• [U-Boot] [PATCHv4 3/4] I2C: Add driver for ST-Ericsson U8500 i2c   John Rigby
• [U-Boot] [PATCH v3 3/3] ARMV7: Vexpress: Add MMC support   John Rigby
• [U-Boot] strawman Fastboot in U-Boot Design Doc   John Rigby
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Stefan Roese
• [U-Boot] [0/6] Patch serie UBI min I/O size fixes   Stefan Roese
• [U-Boot] [PATCH] powerpc/ppc4xx: add ENTRY() to linker script   Stefan Roese
• [U-Boot] [PATCH v2] cfi_flash: use AMD fixups for AMIC (e.g. A29L160A series) too   Stefan Roese
• [U-Boot] [PATCH 2/3] mtd, cfi: introduce void flash_protect_default(void)   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash   Stefan Roese
• [U-Boot] [PATCH] mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices   Stefan Roese
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Stefan Roese
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Stefan Roese
• [U-Boot] [PATCH]: add canyonlands RAM-boot target   Stefan Roese
• [U-Boot] [PATCH 3/8] hwmon: Extend lm63.c to support LM64   Stefan Roese
• [U-Boot] [PATCH] xilinx_ppc_boards: Change address of RESET_VECTOR   Stefan Roese
• [U-Boot] [PATCH 0/8] ppc4xx: Update DLVision 10G support   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: reverse geometry for M29W800DT parts   Stefan Roese
• [U-Boot] [PATCH v2] mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices   Stefan Roese
• [U-Boot] [PATCH] cfi_flash driver - Add delay after reset command   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash   Stefan Roese
• [U-Boot] [PATCH v2] Net: Add Intel E1000 82574L PCIe card support   Zang Roy-R61911
• [U-Boot] [PATCH] powerpc:Enable compiler debug option for powerpc platforms   Zang Roy-R61911
• [U-Boot] [PATCH] powerpc:Enable compiler debug option for powerpc platforms   Zang Roy-R61911
• [U-Boot] [PATCH] powerpc:Enable compiler debug option for powerpc platforms   Zang Roy-R61911
• [U-Boot] [PATCH 1/3] nhk8815: remove platform.S, which was unused at link time   Alessandro Rubini
• [U-Boot] [PATCH 2/3] nhk8815: add support for relocation   Alessandro Rubini
• [U-Boot] [PATCH 3/3] nhk8815: move config targets from Makefile to boards.cfg   Alessandro Rubini
• [U-Boot] [PATCH 2/3 V2] nhk8815: add support for relocation   Alessandro Rubini
• [U-Boot] Question about relocation   Alessandro Rubini
• [U-Boot] [PATCH 1/3] ARM: don't panic if no flash is there   Alessandro Rubini
• [U-Boot] [PATCH 2/3] versatile: use boards.confg   Alessandro Rubini
• [U-Boot] [PATCH 3/3] versatile: support relocation   Alessandro Rubini
• [U-Boot] [PATCH 1/3] ARM: don't panic if no flash is there   Alessandro Rubini
• [U-Boot] Question about relocation   Alessandro Rubini
• [U-Boot] Question about relocation   Alessandro Rubini
• [U-Boot] Question about relocation   Alessandro Rubini
• [U-Boot] [PATCH 1/4] atmel_dataflash: remove use of get_timer_masked   Alessandro Rubini
• [U-Boot] [PATCH 2/4] ARM: don't relocate if we are already too high   Alessandro Rubini
• [U-Boot] [PATCH 3/4] at91sam9261/g10: support relocation   Alessandro Rubini
• [U-Boot] [PATCH 4/4] at91sam9261/g10: move config from Makefile to boards.cfg   Alessandro Rubini
• [U-Boot] [STATUS] U-Boot v2011.03 released - Merge Window OPEN   Graeme Russ
• [U-Boot] [PATCH] eNET: Fix undefined reference to `monitor_flash_len'   Graeme Russ
• [U-Boot] [PATCH] Handle most LDSCRIPT setting centrally   Graeme Russ
• [U-Boot] [PATCH] eNET: Fix undefined reference to `monitor_flash_len'   Graeme Russ
• [U-Boot] [PATCH 0/6] x86: General cleanup   Graeme Russ
• [U-Boot] [PATCH 1/6] eNET: Fix saveenv crash   Graeme Russ
• [U-Boot] [PATCH 2/6] eNET: Remove config.mk   Graeme Russ
• [U-Boot] [PATCH 3/6] x86: Code cleanup   Graeme Russ
• [U-Boot] [PATCH 4/6] x86: Rename i386 to x86   Graeme Russ
• [U-Boot] [PATCH 5/6] sc520: Move reset to stand-alone file   Graeme Russ
• [U-Boot] [PATCH 6/6] x86: Update MAINTAINERS and delete README files   Graeme Russ
• [U-Boot] [RFC] Centralise documentation of CONFIG_ options (and finding unused ones)   Graeme Russ
• [U-Boot] Is patchwork dropping patches?   Graeme Russ
• [U-Boot] [PATCH 1/6] eNET: Fix saveenv crash   Graeme Russ
• [U-Boot] [PATCH 2/6] eNET: Remove config.mk   Graeme Russ
• [U-Boot] [PATCH 3/6] x86: Code cleanup   Graeme Russ
• [U-Boot] [PATCH 4/6] x86: Rename i386 to x86   Graeme Russ
• [U-Boot] [PATCH 5/6] sc520: Move reset to stand-alone file   Graeme Russ
• [U-Boot] [PATCH 6/6] x86: Update MAINTAINERS and delete README files   Graeme Russ
• [U-Boot] [x86] Pull request   Graeme Russ
• [U-Boot] [RFC] Centralise documentation of CONFIG_ options (and finding unused ones)   Graeme Russ
• [U-Boot] [PATCH] cmd_nvedit.c: clean up with checkpatch   Graeme Russ
• [U-Boot] [RFC] Centralise documentation of CONFIG_ options (and finding unused ones)   Graeme Russ
• [U-Boot] [RFC] Centralise documentation of CONFIG_ options (and finding unused ones)   Graeme Russ
• [U-Boot] Policy for checkpatch usage?   Graeme Russ
• [U-Boot] Policy for checkpatch usage?   Graeme Russ
• [U-Boot] Policy for checkpatch usage?   Graeme Russ
• [U-Boot] Policy for checkpatch usage?   Graeme Russ
• [U-Boot] Policy for checkpatch usage?   Graeme Russ
• [U-Boot] Policy for checkpatch usage?   Graeme Russ
• [U-Boot] Expanding checkpatch for non-linux (specifically U-Boot) use   Graeme Russ
• [U-Boot] Policy for checkpatch usage?   Graeme Russ
• [U-Boot] Expanding checkpatch for non-linux (specifically U-Boot) use   Graeme Russ
• [U-Boot] LOAN PROPOSAL   CRAWTHER BILLS FINANCE SERVICE
• [U-Boot] LOAN PROPOSAL   CRAWTHER BILLS FINANCE SERVICE
• [U-Boot] LOAN PROPOSAL   CRAWTHER BILLS FINANCE SERVICE
• [U-Boot] nand partition   Sanjeev_86
• [U-Boot] How can I replace the Linux scrolling text during boot-up with a splash image?   Stephen Saputo
• [U-Boot] [PATCH] Add CONFIG_AT91FAMILY to AT91RM9200 arch   Jens Scharsig
• [U-Boot] [PATCH ATMEL REWORK][V3] update arm/at91rm9200 work with rework rework110202   Jens Scharsig
• [U-Boot] RFC: How use same interface between arm926ejs/at91 and arm920t/at91   Jens Scharsig
• [U-Boot] [PATCH] eb_cpux9k2: add USB host support to board   Jens Scharsig
• [U-Boot] [PATCH v4 00/23] keymile board update   Heiko Schocher
• [U-Boot] [PATCH v4 01/23] powerpc, mpc83xx: add missing functions to include/common.h   Heiko Schocher
• [U-Boot] [PATCH v4 02/23] arm, keymile: rename MACH_SUEN3 to MACH_KM_KIRKWOOD   Heiko Schocher
• [U-Boot] [PATCH v4 03/23] keymile: Fix Coding style issues for keymile boards.   Heiko Schocher
• [U-Boot] [PATCH v4 04/23] ppc, arm: adapt keymile header   Heiko Schocher
• [U-Boot] [PATCH v4 05/23] arm, ppc: rework environment variables for keymile boards   Heiko Schocher
• [U-Boot] [PATCH v4 06/23] mpc832x: add support for the mpc8321 based suvd3 board   Heiko Schocher
• [U-Boot] [PATCH v4 07/23] mpc832x: add support for mpc8321 based tuxa1 board   Heiko Schocher
• [U-Boot] [PATCH v4 08/23] mpc832x: add support for mpc8321 based tuda1 board   Heiko Schocher
• [U-Boot] [PATCH v4 09/23] arm: add support for kirkwood based mgcoge2un board   Heiko Schocher
• [U-Boot] [PATCH v4 10/23] arm: add support of Kirkwood based board SUEN8   Heiko Schocher
• [U-Boot] [PATCH v4 11/23] ppc: add support for ppc based board mgcoge2ne   Heiko Schocher
• [U-Boot] [PATCH v4 12/23] keymile, 8321 boards: move common definitions to km8321-common.h   Heiko Schocher
• [U-Boot] [PATCH v4 13/23] powerpc, 83xx: add kmsupx5 board support   Heiko Schocher
• [U-Boot] [PATCH v4 14/23] km-arm: i2c support for suenx based boards   Heiko Schocher
• [U-Boot] [PATCH v4 15/23] km_arm: change some register values for SDRAM initialization   Heiko Schocher
• [U-Boot] [PATCH v4 16/23] ppc, 8321: cleanup tuxa1, tuda1 and suvd3 support   Heiko Schocher
• [U-Boot] [PATCH v4 17/23] keymile, common; fix i2c deblocking support   Heiko Schocher
• [U-Boot] [PATCH v4 18/23] arm, keymile: updates for the arm based boards from keymile   Heiko Schocher
• [U-Boot] [PATCH v4 19/23] keymile boards: add CONFIG_PIGGY_MAC_ADRESS_OFFSET   Heiko Schocher
• [U-Boot] [PATCH v4 20/23] keymile, common: add setting of some environment variables   Heiko Schocher
• [U-Boot] [PATCH v4 21/23] ppc, arm: rework and enhance keymile-common.h   Heiko Schocher
• [U-Boot] [PATCH v4 22/23] keymile boards: support of boardId / hwkey lists   Heiko Schocher
• [U-Boot] [PATCH v4 23/23] keymile-common.h: remove IO mux stuff   Heiko Schocher
• [U-Boot] [PATCHv2 3/4] I2C: add driver of st-ericsson u8500 i2c   Heiko Schocher
• [U-Boot] [PATCH 0/3] powerpc, mpc52xx: update for digsy_mtc support   Heiko Schocher
• [U-Boot] [PATCH 1/3] mpc52xx, digsy_mtc: change phy addr for rev5 boards.   Heiko Schocher
• [U-Boot] [PATCH 2/3] mtd, cfi: introduce void flash_protect_default(void)   Heiko Schocher
• [U-Boot] [PATCH 3/3] mpc52xx, digsy_mtc: protect default flash sectors   Heiko Schocher
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Heiko Schocher
• [U-Boot] [PATCH] mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices   Heiko Schocher
• [U-Boot] [PATCH v2] mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices   Heiko Schocher
• [U-Boot] [PATCHv3 3/4] I2C: Add driver for ST-Ericsson U8500 i2c   Heiko Schocher
• [U-Boot] [PATCH] I2C: OMAP: detect more devices when probing an i2c bus   Heiko Schocher
• [U-Boot] [PATCH v2] I2C: OMAP: detect more devices when probing an i2c bus   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [PATCH 2/2] README.arm-relocation: get relocated address in gdb   Heiko Schocher
• [U-Boot] [PATCH 18/30] i2c: add i2c deblock sequence before and after every mux config   Heiko Schocher
• [U-Boot] [PATCH 19/30] i2c, soft_i2c: deblock bus if switching to another i2c bus   Heiko Schocher
• [U-Boot] [PATCHv4 3/4] I2C: Add driver for ST-Ericsson U8500 i2c   Heiko Schocher
• [U-Boot] [PATCH v3 2/2] README.arm-relocation: get relocated address in gdb   Heiko Schocher
• [U-Boot] [PATCH v3 1/2] README.arm-relocation: get relocated address from bdinfo   Heiko Schocher
• [U-Boot] [PATCH] mpc83xx: restrict UTMI PHY configuration to 831x parts   Andre Schwarz
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Andre Schwarz
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Andre Schwarz
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Andre Schwarz
• [U-Boot] data alignment problem with redundant env   Andre Schwarz
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Andre Schwarz
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Andre Schwarz
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Andre Schwarz
• [U-Boot] [PATCH] MatrixVision common code: use getenv_f instead of snprintf.   Andre Schwarz
• [U-Boot] [PATCH] MPC837x: set i2c1_clk Running on mpc837x without CONFIG_FSL_ESDHC leads to i2c1_clk not being set at all. It is bound to clock of encryption module. fix this.   Andre Schwarz
• [U-Boot] [PATCH] MPC83xx: add define for global half-strength enable (HSE)   Andre Schwarz
• [U-Boot] [PATCH] MPC83xx: add config options for memory setup.   Andre Schwarz
• [U-Boot] [PATCH v2] MPC837x: set i2c1_clk   Andre Schwarz
• [U-Boot] [PATCH 0/4] MPC83xx: Add MergerBox support.   Andre Schwarz
• [U-Boot] [PATCH 1/4] MergerBox: Add board config file.   Andre Schwarz
• [U-Boot] [PATCH 2/4] MergerBox: add documentation.   Andre Schwarz
• [U-Boot] [PATCH 3/4] MergerBox: add maintainer and boards.cfg entries.   Andre Schwarz
• [U-Boot] [PATCH 4/4] MergerBox: add board specific files in vendor dir.   Andre Schwarz
• [U-Boot] The forbidden value in omap3-common timer.c code   Simon Schwarz
• [U-Boot] bootpath of the u-boot   Simon Schwarz
• [U-Boot] boot-up time optimization. Where to start?   Simon Schwarz
• [U-Boot] boot-up time optimization. Where to start?   Simon Schwarz
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Schwarz,Andre
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   Schwarz,Andre
• [U-Boot] [PATCH 2/2] MIPS: Coding style cleanups on common assembly files   Daniel Schwierzeck
• [U-Boot] [IXP42x PATCH series v4 00/17] Overview   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 01/17] add XScale sub architecture (IXP/PXA) to maintainer list   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 02/17] add support for IXP42x Rev. B1 and newer   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 03/17] trigger hardware watchdog in IXP42x serial driver   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 04/17] Fix IXP code to work after relocation was added   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 05/17] fix "depend" target in npe directory   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 06/17] support CONFIG_SYS_LDSCRIPT on ARM   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 07/17] use -ffunction-sections / --gc-sections on IXP42x   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 08/17] update/fix AcTux1 board   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 09/17] update/fix AcTux2 board   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 10/17] update/fix AcTux3 board   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 11/17] update/fix AcTux4 board   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 12/17] IXP NPE: add support for fixed-speed MII ports   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 13/17] add dvlhost (dLAN 200 AV Wireless G) board   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 14/17] update/fix IXDP425 / IXDPG425 boards   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 15/17] update/fix PDNB3 board   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 16/17] IXP42x PCI rewrite   Michael Schwingen
• [U-Boot] [IXP42x PATCH series v4 17/17] run arm_pci_init after relocation   Michael Schwingen
• [U-Boot] Update and Cut down mach types   Michael Schwingen
• [U-Boot] Update and Cut down mach types   Michael Schwingen
• [U-Boot] Update and Cut down mach types   Michael Schwingen
• [U-Boot] Update and Cut down mach types   Michael Schwingen
• [U-Boot] Update and Cut down mach types   Michael Schwingen
• [U-Boot] Second serial port access ...   Robert Sciuk
• [U-Boot] Your account has been temporarily limited.   PayPal Servce
• [U-Boot] Dear Webmail User   Webmail Upgrading Service
• [U-Boot] SPI - cs validity   Ran Shalit
• [U-Boot] SPI - cs validity   Ran Shalit
• [U-Boot] ramtron f-ram   Ran Shalit
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Xie Shaohui-B21989
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Xie Shaohui-B21989
• [U-Boot] [PATCH 2/2][v2] powerpc: make espi can read more than 0xFFFA bytes   Xie Shaohui-B21989
• [U-Boot] [PATCH 1/2][v3] powerpc: eSPI and eSPI controller support   Xie Shaohui-B21989
• [U-Boot] [PATCH 2/2][v3] powerpc: make espi can read more than 0xFFFA bytes   Xie Shaohui-B21989
• [U-Boot] [PATCH][v4] powerpc: eSPI and eSPI controller support   Xie Shaohui-B21989
• [U-Boot] [PATCH][v4] powerpc: eSPI and eSPI controller support   Xie Shaohui-B21989
• [U-Boot] [PATCH] part_dos: allocate sector buffer dynamically   Sergei Shtylyov
• [U-Boot] [PATCH] MX51: mx51evk: Use struct to access SRSR register instead of offset   Sergei Shtylyov
• [U-Boot] [PATCH 7/9] Add board support for TS-7800   Michael Spang
• [U-Boot] [PATCH 5/9] ARM: Rename CONFIG_SKIP_LOWLEVEL_INIT to CONFIG_SKIP_CPU_INIT_CRIT   Michael Spang
• [U-Boot] [PATCH 8/9] Add NAND support for TS-7800   Michael Spang
• [U-Boot] [PATCH 9/9] Add README for TS-7800   Michael Spang
• [U-Boot] [PATCH 2/9] mvgbe: Support preserving the existing MAC address   Michael Spang
• [U-Boot] [PATCH 2/9] mvgbe: Support preserving the existing MAC address   Michael Spang
• [U-Boot] [PATCH 6/9] ARM: Implement CONFIG_SKIP_LOWLEVEL_INIT for arm926ej-s   Michael Spang
• [U-Boot] [PATCH] arm: Tegra2: Fix out of tree builds   Anton Staaf
• [U-Boot] [PATCH] arm: Tegra2: Fix out of tree builds   Anton Staaf
• [U-Boot] boot-up time optimization. Where to start?   Alexander Stein
• [U-Boot] [PATCH] Add flexbus support for Freescale Coldfire 5235   Jate Sujjavanich
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   York Sun
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   York Sun
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   York Sun
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   York Sun
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   York Sun
• [U-Boot] [RFC] mpc83xx: add config options to spd_sdram   York Sun
• [U-Boot] [PATCH] MPC83xx: add config options for memory setup.   York Sun
• [U-Boot] Hot sale LED lightings   Sunbow-Sophia
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Timur Tabi
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] [PATCH] [v2] powerpc: fix implementation of out_8 to match the other out_XX functions   Timur Tabi
• [U-Boot] [PATCH] [v4 powerpc: use 'video-mode' environment variable to configure DIU   Timur Tabi
• [U-Boot] [PATCH] mpc83xx fdt: do not adjust clock frequency of external UARTs   Timur Tabi
• [U-Boot] [RFC] Centralise documentation of CONFIG_ options (and finding unused ones)   Timur Tabi
• [U-Boot] [PATCH v5] powerpc: use 'video-mode' environment variable to configure DIU   Timur Tabi
• [U-Boot] [PATCH] powerpc/86xx: display boot device and bank on the MPC8610 HPCD   Timur Tabi
• [U-Boot] powerpc/86xx: remove empty board_early_init_f()   Timur Tabi
• [U-Boot] powerpc/83xx: remove empty board_early_init_f()   Timur Tabi
• [U-Boot] [PATCH] powerpc/85xx: fix compatible property for the L2 cache node   Timur Tabi
• [U-Boot] [u-boot-release] [PATCH] tsec: Fix MDIO on devices with eTSEC2   Timur Tabi
• [U-Boot] [PATCH] powerpc/85xx: fix compatible property for the L2 cache node   Timur Tabi
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Timur Tabi
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Timur Tabi
• [U-Boot] [PATCH] [v3] powerpc/85xx: fix compatible property for the L2 cache node   Timur Tabi
• [U-Boot] [PATCH] [v4] powerpc/85xx: fix compatible property for the L2 cache node   Timur Tabi
• [U-Boot] [PATCH] [v5] powerpc/85xx: fix compatible property for the L2 cache node   Timur Tabi
• [PATCH] Smart autoboot   Johannes Thoma
• [U-Boot] [PATCH]: Smart Autoboot   Johannes Thoma
• [U-Boot] [PATCH]: Smart Autoboot   Johannes Thoma
• [U-Boot] CONFIG_SILENT_CONSOLE not working with NAND env   Nick Thompson
• [U-Boot] CONFIG_SILENT_CONSOLE not working with NAND env   Nick Thompson
• [U-Boot] CONFIG_SILENT_CONSOLE not working with NAND env   Nick Thompson
• [U-Boot] CONFIG_SILENT_CONSOLE not working with NAND env   Nick Thompson
• [U-Boot] [PATCH] I2C: OMAP: detect more devices when probing an i2c bus   Nick Thompson
• [U-Boot] [PATCH v2] I2C: OMAP: detect more devices when probing an i2c bus   Nick Thompson
• [U-Boot] [PATCH] [v4] powerpc: clean up DIU macro definitions for Freescale reference boards   Tabi Timur-B04825
• [U-Boot] [PATCH 3/6] powerpc/85xx: Added DIU configs for P1022DS and fixed LVDS config   Tabi Timur-B04825
• [U-Boot] [PATCH 6/6] powerpc/85xx: Add SHARP LQ084S3LG01 LCD support on P1022DS   Tabi Timur-B04825
• [U-Boot] [PATCH] mpc83xx fdt: do not adjust clock frequency of external UARTs   Tabi Timur-B04825
• [U-Boot] [PATCH] powerpc/85xx: Change timebase divisor to be defined per processor   Tabi Timur-B04825
• [U-Boot] [PATCH 4/4] powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001   Tabi Timur-B04825
• [U-Boot] [PATCH] powerpc/85xx: Change timebase divisor to be defined per processor   Tabi Timur-B04825
• [U-Boot] [PATCH 2/9] mvgbe: Support preserving the existing MAC address   Tabi Timur-B04825
• [U-Boot] Pull request for u-boot-video?   Tabi Timur-B04825
• [U-Boot] boot-up time optimization. Where to start?   Tabi Timur-B04825
• [U-Boot] Pull request for u-boot-video?   Tabi Timur-B04825
• [U-Boot] [PATCH] powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards   Tabi Timur-B04825
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Tabi Timur-B04825
• [U-Boot] [PATCH] [v4] powerpc/85xx: fix compatible property for the L2 cache node   Tabi Timur-B04825
• [U-Boot] [PATCH] [v4] powerpc/85xx: fix compatible property for the L2 cache node   Tabi Timur-B04825
• [U-Boot] [PATCH 2/9] mvgbe: Support preserving the existing MAC address   Tabi Timur-B04825
• [U-Boot] CEPAT email saya   Titie
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Joakim Tjernlund
• [U-Boot] [PATCH] JFFS2: accelerate scanning.   Joakim Tjernlund
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Joakim Tjernlund
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Joakim Tjernlund
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Joakim Tjernlund
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Joakim Tjernlund
• [PATCH] powerpc, 8xx: Fixup all 8xx u-boot.lds scripts   Joakim Tjernlund
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Joakim Tjernlund
• [U-Boot] [PATCH] PowerPC: Move -fPIC flag to common place   Joakim Tjernlund
• [PATCH 2/3] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH 0/3] Make 8xx build with -msingle-pic-base   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] powerpc, 8xx: Fix fallout from "Fixup all 8xx u-boot.lds scripts"   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] powerpc, 8xx: adapt a few linker scripts so it will build.   Joakim Tjernlund
• [U-Boot] [PATCH 0/3] Make 8xx build with -msingle-pic-base   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] powerpc, 8xx: adapt a few linker scripts so it will build.   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] powerpc, 8xx: adapt a few linker scripts so it will build.   Joakim Tjernlund
• [U-Boot] [PATCH] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] powerpc, 8xx: adapt a few linker scripts so it will build.   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Joakim Tjernlund
• [U-Boot] [PATCH] disable security warning flags when possible   Joakim Tjernlund
• [U-Boot] Imx51 processor hangs when we do an md 0xf0000000 (memory display) in u-boot   Greg Topmiller
• [U-Boot] Attn: Urgent Payment Information From Western Union!!!   Western Union Money Transfer
• [U-Boot] Payment Information (AWARDED) 5000.00USD   Western Union® Money Transfer
• [U-Boot] [PATCH] QorIQ corenet_ds.h: Wrong PCIe 3 virtual address   Trübenbach, Ralf
• [U-Boot] [PATCH v4] common: add a grepenv command   Peter Tyser
• [U-Boot] [PATCH] cfi_flash: Fix CONFIG_SYS_FLASH_AUTOPROTECT_LIST usage   Peter Tyser
• [U-Boot] Authentication On How To Credit Your Account With The Sum of £5,800,000.00.   BARCLAYS BANK OF UK
• [U-Boot] (no subject)   Western Union
• [U-Boot] Confirmation!!!   Western Union®
• [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation   Aneesh V
• [U-Boot] [U-Boot-Users] U-Boot WinCE booting support?   Marek Vasut
• [U-Boot] [PATCH 01/13] add XScale sub architecture (IXP/PXA) to board list   Marek Vasut
• [U-Boot] [PATCH 01/13] add XScale sub architecture (IXP/PXA) to board list   Marek Vasut
• [U-Boot] [PATCH] cfi_flash: reverse geometry for M29W800DT parts   Marek Vasut
• [U-Boot] [PATCH v3 1/4] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter   Rabin Vincent
• [U-Boot] [PATCH V6 2/5] mv_i2c: use structure to replace the direclty define   Prafulla Wadaskar
• [U-Boot] [PATCH V6 3/5] I2C: add i2c support for Pantheon platform   Prafulla Wadaskar
• [U-Boot] [PATCH V6 4/5] I2C: mv_i2c: add multi bus support   Prafulla Wadaskar
• [U-Boot] [PATCH V6 5/5] I2C: add i2c support for Armada100 platform   Prafulla Wadaskar
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Prafulla Wadaskar
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Prafulla Wadaskar
• [U-Boot] [PATCH] arm/km: change default settings for egiga on mgcoge3un   Prafulla Wadaskar
• [U-Boot] [PATCH] arm/km: add mkimage config file for uart download   Prafulla Wadaskar
• [U-Boot] [PATCH] Keymile boards mainlining, part 2   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Prafulla Wadaskar
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Prafulla Wadaskar
• [U-Boot] [PATCH] mvgbe: enable the reception of packets with an odd number of preamble nibbles   Prafulla Wadaskar
• [U-Boot] [PATCH 2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Prafulla Wadaskar
• [U-Boot] [PATCH 3/3] Rename openrd_base files to openrd.   Prafulla Wadaskar
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Prafulla Wadaskar
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Prafulla Wadaskar
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Prafulla Wadaskar
• [U-Boot] [PATCH 1/7] Orion5x: Correct DRAM bank detection   Prafulla Wadaskar
• [U-Boot] Pull request u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH v2 3/4] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate   Prafulla Wadaskar
• [U-Boot] [PATCH v3 3/3] ARMV7: Vexpress: Add MMC support   Matt Waddel
• [U-Boot] [PATCH V4] arm: Tegra2: add support for A9 CPU init   Tom Warren
• [U-Boot] [PATCH 0/3] Fix hang when loading U-Boot from SPI or NAND   Tom Warren
• [U-Boot] [PATCH 1/3] arm: Tegra2: Add missing PLLX init   Tom Warren
• [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality   Tom Warren
• [U-Boot] [PATCH 3/3] arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init   Tom Warren
• [U-Boot] [PATCH V4] arm: Tegra2: add support for A9 CPU init   Tom Warren
• [U-Boot] [PATCH 1/3] arm: Tegra2: Add missing PLLX init   Tom Warren
• [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality   Tom Warren
• [U-Boot] [PATCH V4] arm: Tegra2: add support for A9 CPU init   Tom Warren
• [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality   Tom Warren
• [U-Boot] [PATCH V2 0/3] Fix hang when loading U-Boot from SPI or NAND   Tom Warren
• [U-Boot] [PATCH V2 1/3] arm: Tegra2: Add missing PLLX init   Tom Warren
• [U-Boot] [PATCH V2 2/3] arm: Tegra2: GPIO: Add basic GPIO definitions   Tom Warren
• [U-Boot] [PATCH V2 3/3] arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init   Tom Warren
• [U-Boot] [PATCH V5] arm: Tegra2: add support for A9 CPU init   Tom Warren
• [U-Boot] [PATCH] GPIO: Tegra2: add GPIO driver for Seaboard and Harmony   Tom Warren
• [U-Boot] [PATCH] spi: Tegra2: Add SPI driver for SPIFLASH on Seaboard   Tom Warren
• [U-Boot] [PATCH] GPIO: Tegra2: add GPIO driver for Seaboard and Harmony   Tom Warren
• [U-Boot] [PATCH v2] nand_spl: Fix large page nand_command()   Alex Waterman
• [U-Boot] [PATCH V2] Do not copy elf section to same adress   Matthias Weisser
• [U-Boot] [PATCH V2] Do not copy elf section to same adress   Matthias Weisser
• [U-Boot] [PATCH] Do not copy to same address   Matthias Weisser
• [U-Boot] Image copy to ram   Matthias Weisser
• [U-Boot] Image copy to ram   Matthias Weisser
• [U-Boot] Update and Cut down mach types   Matthias Weisser
• [U-Boot] [PATCH] Do not copy to same address   Matthias Weißer
• [U-Boot] [PATCH] Do not copy to same address   Matthias Weißer
• [U-Boot] [PATCH] Do not copy to same address   Matthias Weißer
• [U-Boot] Image copy to ram   Matthias Weißer
• [U-Boot] Update and Cut down mach types   Matthias Weißer
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Lei Wen
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Lei Wen
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Lei Wen
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Lei Wen
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Lei Wen
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Lei Wen
• [U-Boot] [PATCH] serial: ns16550: fix different reg size access   Lei Wen
• [U-Boot] [PATCH V6 2/5] mv_i2c: use structure to replace the direclty define   Lei Wen
• [U-Boot] [PATCH V6 3/5] I2C: add i2c support for Pantheon platform   Lei Wen
• [U-Boot] [PATCH V7 0/5] add i2c support to pantheon and aramada100   Lei Wen
• [U-Boot] [PATCH V7 1/5] pxa: move i2c driver to the common place   Lei Wen
• [U-Boot] [PATCH V7 2/5] mv_i2c: use structure to replace the direclty define   Lei Wen
• [U-Boot] [PATCH V7 3/5] I2C: add i2c support for Pantheon platform   Lei Wen
• [U-Boot] [PATCH V7 4/5] I2C: mv_i2c: add multi bus support   Lei Wen
• [U-Boot] [PATCH V7 5/5] I2C: add i2c support for Armada100 platform   Lei Wen
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Lei Wen
• [U-Boot] [PATCH V8 1/6] pxa: move i2c driver to the common place   Lei Wen
• [U-Boot] [PATCH V8 2/6] mv_i2c: fix timeout value to be consistent with comments   Lei Wen
• [U-Boot] [PATCH V8 3/6] mv_i2c: use structure to replace the direclty define   Lei Wen
• [U-Boot] [PATCH V8 4/6] I2C: add i2c support for Pantheon platform   Lei Wen
• [U-Boot] [PATCH V8 5/6] I2C: mv_i2c: add multi bus support   Lei Wen
• [U-Boot] [PATCH V8 6/6] I2C: add i2c support for Armada100 platform   Lei Wen
• [U-Boot] [U-BOOT] [PATCH] mmc: enable switch partition function   Lei Wen
• [U-Boot] [U-BOOT] [PATCH] mmc: enable switch partition function   Lei Wen
• [U-Boot] [U-BOOT] [PATCH] mmc: enable switch partition function   Lei Wen
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Lei Wen
• [U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100   Lei Wen
• [U-Boot] [PATCH V2 0/2] mmc: add partition support   Lei Wen
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Lei Wen
• [U-Boot] [PATCH V2 2/2] mmc: enable partition switch fucntion for emmc   Lei Wen
• [U-Boot] [PATCH V8 1/6] pxa: move i2c driver to the common place   Lei Wen
• [U-Boot] [PATCH V8 1/6] pxa: move i2c driver to the common place   Lei Wen
• [U-Boot] [PATCH V8.1 1/6] pxa: move i2c driver to the common place   Lei Wen
• [U-Boot] mmc "Tran Speed" shows in mmcinfo   Lei Wen
• [U-Boot] [PATCH V2 1/2] cmd_mmc: eliminate device num in the mmc command   Lei Wen
• [U-Boot] CFI flash broken for 8-bit bus   Aaron Williams
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Aaron Williams
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Aaron Williams
• [U-Boot] [PATCH] cfi_flash driver: fixed addressing for 8-bit flash buses.   Aaron Williams
• [U-Boot] [PATCH] cfi_flash driver - Add delay after reset command   Aaron Williams
• [U-Boot] [PATCH] Fix CFI flash driver for 8-bit bus support   Aaron Williams
• [U-Boot] [PATCH] MIPS: Introduce --gc-sections for MIPS   Aaron Williams
• [U-Boot] [PATCH] cfi_flash driver: fixed addressing for 8-bit flash buses.   Aaron Williams
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] dynenv and mtdparts   Scott Wood
• [U-Boot] [PATCH 1/2] NAND: Fix integer overflow in ONFI detection of chips >= 4GiB   Scott Wood
• [U-Boot] Please pull u-boot-mpc85xx.git   Scott Wood
• [U-Boot] Please pull u-boot-mpc85xx.git   Scott Wood
• [U-Boot] CONFIG_SILENT_CONSOLE not working with NAND env   Scott Wood
• [U-Boot] [PATCH] nand_spl: Fix large page nand_command()   Scott Wood
• [U-Boot] [PATCH] nand/spl: Assuming a static nand page size to reduce code size   Scott Wood
• [U-Boot] [PATCH] nand/spl: Assuming a static nand page size to reduce code size   Scott Wood
• [U-Boot] [PATCH 1/2] NS16550: buffer reads   Scott Wood
• [U-Boot] [PATCH 2/2] corenet_ds: enable buffered reads   Scott Wood
• [U-Boot] [PATCH 1/2] NS16550: buffer reads   Scott Wood
• [U-Boot] [PATCH] Handle most LDSCRIPT setting centrally   Scott Wood
• [U-Boot] [PATCH] Handle most LDSCRIPT setting centrally   Scott Wood
• [U-Boot] [PATCH v1 2/2] nand/spl: Assuming a static nand page size to reduce code size   Scott Wood
• [U-Boot] [PATCH v1 2/2] nand/spl: Assuming a static nand page size to reduce code size   Scott Wood
• [U-Boot] [PATCH v2] nand_spl: Fix large page nand_command()   Scott Wood
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Scott Wood
• [U-Boot] [PATCH v3] Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS   Scott Wood
• [U-Boot] [PATCH] powerpc: fix LDSCRIPT in NAND boot   Scott Wood
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Scott Wood
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Modify NAND loader makefiles to compile NAND_SPL linker script   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Policy for checkpatch usage?   Scott Wood
• [U-Boot] Policy for checkpatch usage?   Scott Wood
• [U-Boot] [PATCH 1/3] powerpc/85xx: Enable eSPI controller & SPI bootsupport on P2020DS   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Change timebase divisor to be defined per processor   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Scott Wood
• [U-Boot] [PATCH 6/6] EA20: do not use subpage write for NAND   Scott Wood
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Integrated Flash Controller NAND support   Scott Wood
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Scott Wood
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Scott Wood
• [U-Boot] [PATCH 2/3] Fix a few gcc warnings.   Scott Wood
• [U-Boot] Modify u-boot to let 8315 PCIe run in EP model   Scott Wood
• [U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git (updated)   Scott Wood
• [U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node   Scott Wood
• [U-Boot] [PATCH 1/2][v2] powerpc: eSPI and eSPI controller support   Shaohui Xie
• [U-Boot] [PATCH 2/2][v2] powerpc: make espi can read more than 0xFFFA bytes   Shaohui Xie
• [U-Boot] [PATCH] sf: spansion: add support for new spansion flash   Shaohui Xie
• [U-Boot] [PATCH 1/2][v3] powerpc: eSPI and eSPI controller support   Shaohui Xie
• [U-Boot] [PATCH 2/2][v3] powerpc: make espi can read more than 0xFFFA bytes   Shaohui Xie
• [U-Boot] [PATCH][v4] powerpc: eSPI and eSPI controller support   Shaohui Xie
• [U-Boot] [PATCH][v5] powerpc: eSPI and eSPI controller support   Shaohui Xie
• [U-Boot] I never forget you   Ahmed Zongrana
• [U-Boot] [PATCH 1/3] mpc52xx, digsy_mtc: change phy addr for rev5 boards.   Detlev Zundel
• [U-Boot] [PATCH v2 0/6] Universal PHY Infrastructure   Detlev Zundel
• [U-Boot] [PATCH v2 1/6] tsec: use IO accessors for IO accesses   Detlev Zundel
• [U-Boot] [PATCH v2 2/6] tsec: arrange the code to avoid useless function declaration   Detlev Zundel
• [U-Boot] [PATCH v2 3/6] Remove instances of phy_read/write   Detlev Zundel
• [U-Boot] [PATCH v2 4/6] Create PHY Lib for U-Boot   Detlev Zundel
• [U-Boot] [PATCH v2 5/6] phylib: Add a bunch of PHY drivers from tsec   Detlev Zundel
• [U-Boot] [PATCH v2 6/6] tsec: Convert tsec to use PHY Lib   Detlev Zundel
• [U-Boot] [PATCH v2 0/6] Universal PHY Infrastructure   Detlev Zundel
• [U-Boot] [PATCH v2 2/2] MX31: mx31pdk: Print the cause of reset   Detlev Zundel
• [U-Boot] [PATCH 2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate.   Detlev Zundel
• [U-Boot] [PATCH] JFFS2: bug fix for summary support.   Detlev Zundel
• [U-Boot] [PATCH] JFFS2: accelerate scanning.   Detlev Zundel
• [U-Boot] [PATCH v2] MX51: mx51evk: Use struct to access SRSR register instead of offset   Detlev Zundel
• [U-Boot] [PATCH v5 0/9] Universal PHY Infrastructure   Detlev Zundel
• [U-Boot] [PATCH v5 8/9] fsl: Change fsl_phy_enet_if to phy_interface_t   Detlev Zundel
• [U-Boot] [PATCH] JFFS2: bug fix for summary support.   Detlev Zundel
• [U-Boot] [PATCH] JFFS2: accelerate scanning.   Detlev Zundel
• [U-Boot] [PATCH v3 2/3] MX31: Introduce get_reset_cause()   Detlev Zundel
• [U-Boot] [PATCH V3 1/2] MX5: factor out boot cause funciton to common code   Detlev Zundel
• [U-Boot] [PATCH v2 0/6] TFTP server   Detlev Zundel
• [U-Boot] [PATCH v2 1/6] README: remove spurious line   Detlev Zundel
• [U-Boot] [PATCH v2 2/6] NET: pass source IP address to packet handlers   Detlev Zundel
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Detlev Zundel
• [U-Boot] [PATCH v2 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ   Detlev Zundel
• [U-Boot] [PATCH v2 5/6] TFTP: net/tftp.c: add server mode receive   Detlev Zundel
• [U-Boot] [PATCH v2 6/6] TFTP: add tftpsrv command   Detlev Zundel
• [U-Boot] [PATCH V2] JFFS2: bug fix for summary support.   Detlev Zundel
• [U-Boot] [PATCH,V2] JFFS2: accelerate scanning.   Detlev Zundel
• [U-Boot] [PATCH v5] MX31: Introduce get_reset_cause()   Detlev Zundel
• [U-Boot] UEC phy not working on first try   Detlev Zundel
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Detlev Zundel
• [U-Boot] Update and Cut down mach types   Detlev Zundel
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Detlev Zundel
• [U-Boot] UEC phy not working on first try   Detlev Zundel
• [U-Boot] [PATCH v2 3/6] TFTP: rename "server" to "remote"   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] UEC phy not working on first try   Detlev Zundel
• [U-Boot] checkpatch - theory and practice [was: [PATCH v2 3/6] TFTP: rename "server" to "remote"]   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] TFTP - check for len == 0 before storing   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] Policy for checkpatch usage?   Detlev Zundel
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Detlev Zundel
• [U-Boot] [PATCH] MAKEALL: add -h/--help options   Detlev Zundel
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   Detlev Zundel
• [U-Boot] [PATCH,V2] JFFS2: accelerate scanning.   Detlev Zundel
• [U-Boot] [PATCH V2] JFFS2: bug fix for summary support.   Detlev Zundel
• [U-Boot] [PATCH v2] cmd_nvedit.c: clean up with checkpatch   Detlev Zundel
• [U-Boot] [PATCH v2 1/2] MX31: mx31pdk: Add watchdog support   Detlev Zundel
• [U-Boot] [PATCH 1/2] MX31: mx31pdk: Add watchdog support   Detlev Zundel
• [U-Boot] Update and Cut down mach types   Detlev Zundel
• [U-Boot] [PATCH v3] cmd_nvedit.c: clean up with checkpatch   Detlev Zundel
• [U-Boot] 回覆: [PATCH v2] cmd_nvedit.c: clean up with checkpatch   Detlev Zundel
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Detlev Zundel
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   Detlev Zundel
• [U-Boot] [PATCH] README: Clarify difference of CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG   Detlev Zundel
• [U-Boot] [PATCH v3] cosmetic: cmd_bdinfo.c: clean up by using checkpatch.pl   Detlev Zundel
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Detlev Zundel
• [U-Boot] Update and Cut down mach types   Detlev Zundel
• [U-Boot] fw_setenv usage for multiple copies of U-Boot Environment Variables   Detlev Zundel
• [U-Boot] strawman Fastboot in U-Boot Design Doc   Detlev Zundel
• [U-Boot] [PATCH] README: Clarify difference of CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG   Detlev Zundel
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Detlev Zundel
• [U-Boot] [PATCH v2] cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl   Detlev Zundel
• [U-Boot] [PATCH] MX31: change return value of get_cpu_rev   Detlev Zundel
• [U-Boot] [PATCH 2/5] nand_util: convert nand_write_skip_bad() to flags   Detlev Zundel
• [U-Boot] [PATCH 4/5] cmd_nand: add nand write.ubi command   Detlev Zundel
• [U-Boot] [PATCH 0/5] introduce nand write.ubi, and drop ffs for jffs2 too   Detlev Zundel
• [U-Boot] [PATCH] MX31: change return value of get_cpu_rev   Detlev Zundel
• [U-Boot] [PATCH 1/7] JFFS2: Bug fix for summary support   Detlev Zundel
• [U-Boot] [PATCH 3/7] JFFS2: Calculate buf_len before we read data from flash   Detlev Zundel
• [U-Boot] [PATCH 4/7] JFFS2: Improve error checking   Detlev Zundel
• [U-Boot] [PATCH 5/7] JFFS2: Change DEFAULT_EMPTY_SCAN_SIZE to 256 Bytes   Detlev Zundel
• [U-Boot] [PATCH 6/7] JFFS2: scanning performance improvement   Detlev Zundel
• [U-Boot] [PATCH V2] MX31: change return value of get_cpu_rev   Detlev Zundel
• [U-Boot] [PATCH 1/7] JFFS2: Bug fix for summary support   Detlev Zundel
• [U-Boot] [PATCH 3/7] JFFS2: Calculate buf_len before we read data from flash   Detlev Zundel
• [U-Boot] [PATCH 4/7] JFFS2: Improve error checking   Detlev Zundel
• [U-Boot] [PATCH v7 01/10] nds32: add header files support for nds32   macpaul at andestech.com
• [U-Boot] [PATCH] andes_spi: add andes_spi interface   macpaul at andestech.com
• [U-Boot] 回覆: [PATCH v2] cmd_nvedit.c: clean up with checkpatch   macpaul at andestech.com
• [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version   stefano babic
• [U-Boot] [PATCH V6 2/3] PMIC: Add dialog pmic support   stefano babic
• [U-Boot] Pull request: u-boot-fdt   Jerry Van baren
• [U-Boot] GOODNEWS   honda car board
• [U-Boot] Apple iPhone 3G 32GB unlocked cell phone 100% new   info at dtp.org
• [U-Boot] USB to Ethernet (asix)   rick at efn.org
• [U-Boot] USB to Ethernet (asix)   rick at efn.org
• [U-Boot] Uboot - USB to Ethernet patch   rick at efn.org
• [U-Boot] DSN: failed (Returned mail: see transcript for details)   Mailbot for etexusa.com
• [U-Boot] DSN: failed (Returned mail: Data format error)   Mailbot for etexusa.com
• [U-Boot] DSN: failed (Delivery reports about your e-mail)   Mailbot for etexusa.com
• [U-Boot] DSN: failed (Message could not be delivered)   Mailbot for etexusa.com
• [U-Boot] DSN: failed (Delivery reports about your e-mail)   Mailbot for etexusa.com
• [U-Boot] DSN: failed (MESSAGE COULD NOT BE DELIVERED)   Mailbot for etexusa.com
• [U-Boot] DSN: failed (Delivery reports about your e-mail)   Mailbot for fineweavetextile.com
• [U-Boot] [PATCH] MIPS: Introduce --gc-sections for MIPS   daniel.schwierzeck at googlemail.com
• [U-Boot] re   grand6651
• [U-Boot] is any bug in cp?   hacklu.uboot
• [U-Boot] is any bug in cp?   hacklu.uboot
• [U-Boot] is any bug in cp?   hacklu.uboot
• [U-Boot] is any bug in cp?   hacklu.uboot
• [U-Boot] Your Mail-ID has been awarded £750,000.00 in our Nokia Mobile company   nokiauk33 at itbox.ro
• [U-Boot] (no subject)   manohar kallutla
• [U-Boot] [Test] [u-boot] u-boot timing analysis   manohar kallutla
• [U-Boot] Adding spi support for SH7757 processor.   manohar kallutla
• [U-Boot] Attention Buyer   led10-May
• [U-Boot] [PATCH V4 0/3] Add support for the MMC device to the vexpress   matt.waddel at linaro.org
• [U-Boot] [PATCH V4 1/3] MMC: Max blocks value adjustable   matt.waddel at linaro.org
• [U-Boot] [PATCH V4 2/3] MMC: Add support for PL180 ARM mmc device   matt.waddel at linaro.org
• [U-Boot] [PATCH V4 3/3] ARMV7: Vexpress: Add MMC support   matt.waddel at linaro.org
• [U-Boot] hi   favour mashal
• [U-Boot] [Patch v1] ARMV7: AM3517/05: Add support for CraneBoard.   srinath at mistralsolutions.com
• [U-Boot] (no subject)   terri nechwa
• [U-Boot] Your Payment !!!   Western union payment office
• [U-Boot] problems with u-boot , ignores bootargs while booting.   bumble omap
• [U-Boot] Panda Security for Desktops Warnung   CD-400-552 at pandasecurity.alert
• [U-Boot] Where can i get this patch ??   ravi.rao at rflelect.com
• [U-Boot] Query - BF537 STAMP Board U-boot Prompt‏   sarosh
• [U-Boot] Query - BF537 STAMP Board U-boot Prompt‏   sarosh
• [U-Boot] [PATCH] xilinx_emaclite.c ping-pong macro names   alain.peteut at space.unibe.ch
• [U-Boot] [PATCH] xilinx_emaclite.c ping-pong macro names   alain.peteut at space.unibe.ch
• [U-Boot] how does Linux call the function from u-boot?   sywang
• [U-Boot] Suchen Sie nach einer Beschaftigung, die Ihnen Geld bringen konnte?   athens at theia.denx.de
• [U-Boot] Ein Job mit Nebenbeschaftigung fur alle!   lillyland at theia.denx.de
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] [PATCH] da850evm: fix NAND WSTROBE and TA timings   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Ticket number: YG764T 854R   COCA-COLA at une-pmta04.une.net.co
• [U-Boot] Business Proposal   Mrs at une-pmta04.une.net.co
• [U-Boot] FINANCIAL SERVICE OFFER!!   rvescude at unsl.edu.ar
• [U-Boot] Hello with love,   vivian
• [U-Boot] (no subject)   jeffhemstreet at yahoo.com
• [U-Boot] (no subject)   jeffhemstreet at yahoo.com
• [U-Boot] (no subject)   jeffhemstreet at yahoo.com
• [U-Boot] dynenv and mtdparts   haifeng zhang
• [U-Boot] DM9000 on 2011.03   haifeng zhang
• [U-Boot] [u-boot] why many init func moved to board_init_f and whereis the changelog   du zhigang
• [U-Boot] 【号外】プレゼントのお知らせ   インフォメルマ