[U-Boot] [PATCH v5 9/9] Add mdio command for new PHY infrastructure
Andy Fleming
afleming at freescale.com
Wed Apr 13 09:12:07 CEST 2011
The new mdio command doesn't have all of the features of the mii
command, but it provides the necessary read/write primitives, and allows
users to interact with 10G PHYs, and other PHYs which use Clause 45 of
802.3. This means that the mdio command requires a "Device Address"
argument, though for clause 22 PHYs, the argument can be "-".
Signed-off-by: Andy Fleming <afleming at freescale.com>
---
common/Makefile | 3 +
common/cmd_mdio.c | 286 +++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 289 insertions(+), 0 deletions(-)
create mode 100644 common/cmd_mdio.c
diff --git a/common/Makefile b/common/Makefile
index 02dbeed..5f0c534 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -117,6 +117,9 @@ COBJS-$(CONFIG_MII) += miiphyutil.o
COBJS-$(CONFIG_CMD_MII) += miiphyutil.o
COBJS-$(CONFIG_PHYLIB) += miiphyutil.o
COBJS-$(CONFIG_CMD_MII) += cmd_mii.o
+ifdef CONFIG_PHYLIB
+COBJS-$(CONFIG_CMD_MII) += cmd_mdio.o
+endif
COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
COBJS-$(CONFIG_MP) += cmd_mp.o
diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c
new file mode 100644
index 0000000..cac0703
--- /dev/null
+++ b/common/cmd_mdio.c
@@ -0,0 +1,286 @@
+/*
+ * (C) Copyright 2011 Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MDIO Commands
+ */
+
+#include <common.h>
+#include <command.h>
+#include <miiphy.h>
+#include <phy.h>
+
+
+static char last_op[2];
+static uint last_data;
+static uint last_addr_lo;
+static uint last_addr_hi;
+static uint last_devad_lo;
+static uint last_devad_hi;
+static uint last_reg_lo;
+static uint last_reg_hi;
+
+static int extract_range(char *input, int *plo, int *phi)
+{
+ char *end;
+ *plo = simple_strtol(input, &end, 0);
+ if (end == input)
+ return -1;
+
+ if ((*end == '-') && *(++end))
+ *phi = simple_strtol(end, NULL, 0);
+ else if (*end == '\0')
+ *phi = *plo;
+ else
+ return -1;
+
+ return 0;
+}
+
+int mdio_write_ranges(struct mii_dev *bus, int addrlo,
+ int addrhi, int devadlo, int devadhi,
+ int reglo, int reghi, unsigned short data)
+{
+ int addr, devad, reg;
+ int err = 0;
+
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (devad = devadlo; devad <= devadhi; devad++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ err = bus->write(bus, addr, devad, reg, data);
+
+ if (err)
+ goto err_out;
+ }
+ }
+ }
+
+err_out:
+ return err;
+}
+
+int mdio_read_ranges(struct mii_dev *bus, int addrlo,
+ int addrhi, int devadlo, int devadhi,
+ int reglo, int reghi)
+{
+ int addr, devad, reg;
+
+ printf("Reading from bus %s\n", bus->name);
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ printf("PHY at address %d:\n", addr);
+
+ for (devad = devadlo; devad <= devadhi; devad++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ u16 val;
+ val = bus->read(bus, addr, devad, reg);
+
+ if (val < 0) {
+ printf("Error\n");
+
+ return val;
+ }
+
+ if (devad >= 0)
+ printf("%d.", devad);
+
+ printf("%d - 0x%x\n", reg, val & 0xffff);
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* The register will be in the form [a[-b].]x[-y] */
+int extract_reg_range(char *input, int *devadlo, int *devadhi,
+ int *reglo, int *reghi)
+{
+ char *regstr;
+
+ /* use strrchr to find the last string after a '.' */
+ regstr = strrchr(input, '.');
+
+ /* If it exists, extract the devad(s) */
+ if (regstr) {
+ char devadstr[32];
+
+ strncpy(devadstr, input, regstr - input);
+ devadstr[regstr - input] = '\0';
+
+ if (extract_range(devadstr, devadlo, devadhi))
+ return -1;
+
+ regstr++;
+ } else {
+ /* Otherwise, we have no devad, and we just got regs */
+ *devadlo = *devadhi = MDIO_DEVAD_NONE;
+
+ regstr = input;
+ }
+
+ return extract_range(regstr, reglo, reghi);
+}
+
+int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
+ int *addrlo, int *addrhi)
+{
+ struct phy_device *phydev;
+
+ if ((argc < 1) || (argc > 2))
+ return -1;
+
+ /* If there are two arguments, it's busname addr */
+ if (argc == 2) {
+ *bus = miiphy_get_dev_by_name(argv[0]);
+
+ if (!*bus)
+ return -1;
+
+ return extract_range(argv[1], addrlo, addrhi);
+ }
+
+ /* It must be one argument, here */
+
+ /*
+ * This argument can be one of two things:
+ * 1) Ethernet device name
+ * 2) Just an address (use the previously-used bus)
+ *
+ * We check all buses for a PHY which is connected to an ethernet
+ * device by the given name. If none are found, we call
+ * extract_range() on the string, and see if it's an address range.
+ */
+ phydev = mdio_phydev_for_ethname(argv[0]);
+
+ if (phydev) {
+ *addrlo = *addrhi = phydev->addr;
+ *bus = phydev->bus;
+
+ return 0;
+ }
+
+ /* It's an address or nothing useful */
+ return extract_range(argv[0], addrlo, addrhi);
+}
+
+/* ---------------------------------------------------------------- */
+static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ char op[2];
+ int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
+ unsigned short data;
+ int pos = argc - 1;
+ struct mii_dev *bus;
+
+ if (argc < 2)
+ return cmd_usage(cmdtp);
+
+ /*
+ * We use the last specified parameters, unless new ones are
+ * entered.
+ */
+ op[0] = argv[1][0];
+ addrlo = last_addr_lo;
+ addrhi = last_addr_hi;
+ devadlo = last_devad_lo;
+ devadhi = last_devad_hi;
+ reglo = last_reg_lo;
+ reghi = last_reg_hi;
+ data = last_data;
+
+ bus = mdio_get_current_dev();
+
+ if (flag & CMD_FLAG_REPEAT)
+ op[0] = last_op[0];
+
+ switch (op[0]) {
+ case 'w':
+ if (pos > 1)
+ data = simple_strtoul(argv[pos--], NULL, 16);
+ case 'r':
+ if (pos > 1)
+ if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
+ ®lo, ®hi))
+ return -1;
+
+ default:
+ if (pos > 1)
+ if (extract_phy_range(&(argv[2]), pos - 1, &bus,
+ &addrlo, &addrhi))
+ return -1;
+
+ break;
+ }
+
+ if (op[0] == 'l') {
+ mdio_list_devices();
+
+ return 0;
+ }
+
+ /* Save the chosen bus */
+ miiphy_set_current_dev(bus->name);
+
+ switch (op[0]) {
+ case 'w':
+ mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi,
+ reglo, reghi, data);
+ break;
+
+ case 'r':
+ mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi,
+ reglo, reghi);
+ break;
+ }
+
+ /*
+ * Save the parameters for repeats.
+ */
+ last_op[0] = op[0];
+ last_addr_lo = addrlo;
+ last_addr_hi = addrhi;
+ last_devad_lo = devadlo;
+ last_devad_hi = devadhi;
+ last_reg_lo = reglo;
+ last_reg_hi = reghi;
+ last_data = data;
+
+ return 0;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+ mdio, 6, 1, do_mdio,
+ "MDIO utility commands",
+ "list - List MDIO buses\n"
+ "mdio read <phydev> [<devad>.]<reg> - "
+ "read PHY's register at <devad>.<reg>\n"
+ "mdio write <phydev> [<devad>.]<reg> <data> - "
+ "write PHY's register at <devad>.<reg>\n"
+ "<phydev> may be:\n"
+ " <busname> <addr>\n"
+ " <addr>\n"
+ " <eth name>\n"
+ "<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n"
+);
--
1.6.5.2.g6ff9a
More information about the U-Boot
mailing list