[U-Boot] [RFC] mpc83xx: add config options to spd_sdram

[York Sun]

On Fri, 2011-04-08 at 09:41 +0200, Andre Schwarz wrote:
> > I am sorry I totally ignored the subject with mpc83xx. I was thinking of
> > mpc85xx.
> ok - no "new" code for 83xx then.
> > You are right the old code is in spd_sdram.c and it is still in use for
> > mpc83xx. Unless to adjust the code, there is no board specific file.
> >
> Are you willing to accept some changes to spd_sdram.c or will I have 
> another out-of-tree board  ?
> 
> What we need is :
> 
> - more configurable settings like driver strength, cpo and odt values.
> - Reading SPD data from an arbitrary i2c eeprom.
> 
> What's so bad about my proposal ?
> Please let me know so that I'm able to improve.
> 

I welcome the change to use the new code since the feature you asked is
already there.

York