[U-Boot] [PATCH 6/9] cmd_sf: add handler for +len arg for erase command

[Richard Retanubun]

On 04/12/11 02:35, Mike Frysinger wrote:
> From: Richard Retanubun<RichardRetanubun at ruggedcom.com>
>
> This patch adds [+]len handler for the erase command that will
> automatically round up the requested erase length to the flash's
> sector_size.
>
> Signed-off-by: Richard Retanubun<RichardRetanubun at RuggedCom.com>
> Signed-off-by: Mike Frysinger<vapier at gentoo.org>
> ---
> Richard: I noticed some issues in your original patch, so please try
> 	this one instead and see if it still works for you.
Hi Mike,

Code looks okay. I won't have time to test for a while. Feel free to mainline if it works for you
if it makes problems for me, I'll figure it out and poke you then.

- Richard

>
>   common/cmd_sf.c |   51 +++++++++++++++++++++++++++++++++++++++++++++++----
>   1 files changed, 47 insertions(+), 4 deletions(-)
>
> diff --git a/common/cmd_sf.c b/common/cmd_sf.c
> index 6e7be81..afbef99 100644
> --- a/common/cmd_sf.c
> +++ b/common/cmd_sf.c
> @@ -19,6 +19,47 @@
>
>   static struct spi_flash *flash;
>
> +
> +/*
> + * This function computes the length argument for the erase command.
> + * The length on which the command is to operate can be given in two forms:
> + * 1.<cmd>  offset len  - operate on<'offset',  'len')
> + * 2.<cmd>  offset +len - operate on<'offset',  'round_up(len)')
> + * If the second form is used and the length doesn't fall on the
> + * sector boundary, than it will be adjusted to the next sector boundary.
> + * If it isn't in the flash, the function will fail (return -1).
> + * Input:
> + *    arg: length specification (i.e. both command arguments)
> + * Output:
> + *    len: computed length for operation
> + * Return:
> + *    1: success
> + *   -1: failure (bad format, bad address).
> + */
> +static int sf_parse_len_arg(char *arg, ulong *len)
> +{
> +	char *ep;
> +	char round_up_len; /* indicates if the "+length" form used */
> +	ulong len_arg;
> +
> +	round_up_len = 0;
> +	if (*arg == '+') {
> +		round_up_len = 1;
> +		++arg;
> +	}
> +
> +	len_arg = simple_strtoul(arg,&ep, 16);
> +	if (ep == arg || *ep != '\0')
> +		return -1;
> +
> +	if (round_up_len&&  flash->sector_size>  0)
> +		*len = ROUND(len_arg - 1, flash->sector_size);
> +	else
> +		*len = len_arg;
> +
> +	return 1;
> +}
> +
>   static int do_spi_flash_probe(int argc, char * const argv[])
>   {
>   	unsigned int bus = 0;
> @@ -135,8 +176,9 @@ static int do_spi_flash_erase(int argc, char * const argv[])
>   	offset = simple_strtoul(argv[1],&endp, 16);
>   	if (*argv[1] == 0 || *endp != 0)
>   		goto usage;
> -	len = simple_strtoul(argv[2],&endp, 16);
> -	if (*argv[2] == 0 || *endp != 0)
> +
> +	ret = sf_parse_len_arg(argv[2],&len);
> +	if (ret != 1)
>   		goto usage;
>
>   	ret = spi_flash_erase(flash, offset, len);
> @@ -148,7 +190,7 @@ static int do_spi_flash_erase(int argc, char * const argv[])
>   	return 0;
>
>   usage:
> -	puts("Usage: sf erase offset len\n");
> +	puts("Usage: sf erase offset [+]len\n");
>   	return 1;
>   }
>
> @@ -189,5 +231,6 @@ U_BOOT_CMD(
>   	"				  `offset' to memory at `addr'\n"
>   	"sf write addr offset len	- write `len' bytes from memory\n"
>   	"				  at `addr' to flash at `offset'\n"
> -	"sf erase offset len		- erase `len' bytes from `offset'"
> +	"sf erase offset [+]len		- erase `len' bytes from `offset'\n"
> +	"				  `+len' round up `len' to block size"
>   );