[U-Boot] [PATCH] da850evm: fix NAND WSTROBE and TA timings

[Ben Gardiner]

The current NAND timings, introduced in commit
a3f88293ddd13facd734769c1664d35ab4ed681f da850evm: setup the NAND flash
timings , incorrectly set WSTROBE and TA to 0. A more recent inspection of the
values set by the Linux kernel indicates that these should be set to 1.

Set the WSTROBE and TA field of the EMIFA cycle-count timings configuration to
1 to match the values set by linux.

Signed-off-by: Ben Gardiner <bengardiner at nanometrics.ca>
CC: Stefano Babic <sbabic at denx.de>
CC: Sandeep Paulraj <s-paulraj at ti.com>
CC: Scott Wood <scottwood at freescale.com>
---
 board/davinci/da8xxevm/da850evm.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index b088c9c..73eaa48 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -179,12 +179,12 @@ int board_init(void)
 	 * Linux kernel @ 25MHz EMIFA
 	 */
 	writel((DAVINCI_ABCR_WSETUP(0) |
-		DAVINCI_ABCR_WSTROBE(0) |
+		DAVINCI_ABCR_WSTROBE(1) |
 		DAVINCI_ABCR_WHOLD(0) |
 		DAVINCI_ABCR_RSETUP(0) |
 		DAVINCI_ABCR_RSTROBE(1) |
 		DAVINCI_ABCR_RHOLD(0) |
-		DAVINCI_ABCR_TA(0) |
+		DAVINCI_ABCR_TA(1) |
 		DAVINCI_ABCR_ASIZE_8BIT),
 	       &davinci_emif_regs->ab2cr); /* CS3 */
 #endif
-- 
1.7.1