[U-Boot] [PATCH 1/4] MergerBox: Add board config file.
Andre Schwarz
andre.schwarz at matrix-vision.de
Thu Apr 14 15:11:44 CEST 2011
Signed-off-by: Andre Schwarz <andre.schwarz at matrix-vision.de>
---
include/configs/MERGERBOX.h | 619 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 619 insertions(+), 0 deletions(-)
create mode 100644 include/configs/MERGERBOX.h
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h
new file mode 100644
index 0000000..f9681cd
--- /dev/null
+++ b/include/configs/MERGERBOX.h
@@ -0,0 +1,619 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz at matrix-vision.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <version.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1
+#define CONFIG_MPC83xx 1
+#define CONFIG_MPC837x 1
+#define CONFIG_MPC8377 1
+
+#define CONFIG_SYS_TEXT_BASE 0xFC000000
+
+#define CONFIG_PCI 1
+
+#define CONFIG_MASK_AER_AO
+#define CONFIG_DISPLAY_AER_FULL
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ */
+#define CONFIG_TSEC_ENET
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
+#define CONFIG_PCIE
+#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+/*
+ * Hardware Reset Configuration Word stored in EEPROM.
+ */
+#define CONFIG_SYS_HRCW_LOW 0
+#define CONFIG_SYS_HRCW_HIGH 0
+
+/* Arbiter Configuration Register */
+#define CONFIG_SYS_ACR_PIPE_DEP 3
+#define CONFIG_SYS_ACR_RPTCNT 3
+
+/* System Priority Control Regsiter */
+#define CONFIG_SYS_SPCR_TSECEP 3
+
+/* System Clock Configuration Register */
+#define CONFIG_SYS_SCCR_TSEC1CM 3
+#define CONFIG_SYS_SCCR_TSEC2CM 0
+#define CONFIG_SYS_SCCR_SDHCCM 3
+#define CONFIG_SYS_SCCR_ENCCM 3 /* also clock for I2C-1 */
+#define CONFIG_SYS_SCCR_USBDRCM CONFIG_SYS_SCCR_ENCCM /* must match */
+#define CONFIG_SYS_SCCR_PCIEXP1CM 3
+#define CONFIG_SYS_SCCR_PCIEXP2CM 3
+#define CONFIG_SYS_SCCR_PCICM 1
+#define CONFIG_SYS_SCCR_SATACM 0xFF
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRH 0x087c0000
+#define CONFIG_SYS_SICRL 0x40000000
+
+/*
+ * Output Buffer Impedance
+ */
+#define CONFIG_SYS_OBIR 0x30000000
+
+/*
+ * IMMR new address
+ */
+#define CONFIG_SYS_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_83XX_DDR_USES_CS0
+
+#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN | DDRCDR_PZ_HIZ |\
+ DDRCDR_NZ_HIZ | DDRCDR_ODT |\
+ DDRCDR_Q_DRN)
+
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+
+#define CONFIG_SYS_DDR_MODE_WEAK
+#define CONFIG_SYS_DDR_WRITE_DATA_DELAY 2
+#define CONFIG_SYS_DDR_CPO 0x1f
+
+/* SPD table located at offset 0x20 in extended adressing ROM
+ * used for HRCW fetch after power-on reset
+ */
+#define CONFIG_SPD_EEPROM
+#define SPD_EEPROM_ADDRESS 0x50
+#define SPD_EEPROM_OFFSET 0x20
+#define SPD_EEPROM_ADDR_LEN 2
+
+/*
+ * The reserved memory
+ */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (512*1024)
+#define CONFIG_SYS_MALLOC_LEN (512*1024)
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\
+ CONFIG_SYS_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
+#define CONFIG_SYS_LBC_LBCR 0x00000000
+#define CONFIG_FSL_ELBC 1
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_SIZE 64
+
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB)
+
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_FLASH_BASE | OR_UPM_XAM |\
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 |\
+ OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX |\
+ OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CONFIG_MTD_NAND_VERIFY_WRITE 1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_NAND_FSL_ELBC 1
+
+#define CONFIG_SYS_NAND_BASE 0xE0600000
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | (2<<BR_DECC_SHIFT) |\
+ BR_PS_8 | BR_MS_FCM | BR_V)
+#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 | OR_FCM_BCTLD | OR_FCM_CST |\
+ OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST |\
+ OR_FCM_TRLX | OR_FCM_EHTR)
+
+#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
+
+#define CONFIG_CONSOLE ttyS0
+#define CONFIG_BAUDRATE 115200
+
+/* SERDES */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+#define CONFIG_FSL_SERDES2 0xe3100
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* I2C */
+#define CONFIG_HARD_I2C
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_SPEED 120000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCI_MEM_BASE 0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE (256 << 20)
+#define CONFIG_SYS_PCI_MMIO_BASE 0x90000000
+#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE (256 << 20)
+#define CONFIG_SYS_PCI_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS 0xE0300000
+#define CONFIG_SYS_PCI_IO_SIZE (1 << 20)
+
+#ifdef CONFIG_PCIE
+#define CONFIG_SYS_PCIE1_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_CFG_SIZE (128 << 20)
+#define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE (256 << 20)
+#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000
+#define CONFIG_SYS_PCIE1_IO_SIZE (8 << 20)
+
+#define CONFIG_SYS_PCIE2_BASE 0xC0000000
+#define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000
+#define CONFIG_SYS_PCIE2_CFG_SIZE (128 << 20)
+#define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE (256 << 20)
+#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000
+#define CONFIG_SYS_PCIE2_IO_SIZE (8 << 20)
+#endif
+
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
+/*
+ * TSEC
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_GMII /* MII PHY management */
+#define CONFIG_SYS_VSC8601_SKEWFIX
+#define CONFIG_SYS_VSC8601_SKEW_TX 3
+#define CONFIG_SYS_VSC8601_SKEW_RX 3
+
+#define CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define TSEC1_PHY_ADDR 0x10
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC1_PHYIDX 0
+
+#define CONFIG_ETHPRIME "TSEC0"
+#define CONFIG_HAS_ETH0
+
+/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CONFIG_SYS_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1_OFFSET 0x18000
+#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
+#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CONFIG_SYS_SATA2_OFFSET 0x19000
+#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
+#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
+
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_VENDOREX
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_RANDOM_DELAY
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_SATA
+
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=NOR,nand0=NAND"
+#define MTDPARTS_DEFAULT "mtdparts=NOR:1M(u-boot),2M(FPGA);NAND:-(root)"
+
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE 1
+
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_LOAD_ADDR 0x2000000
+#define CONFIG_LOADADDR 0x4000000
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 256
+
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_LOADS_ECHO 1
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
+
+#define CONFIG_SYS_MEMTEST_START (60<<20)
+#define CONFIG_SYS_MEMTEST_END (70<<20)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 256 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_INSTRUCTION_CACHE)
+#define CONFIG_SYS_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+#define CONFIG_HIGH_BATS 1
+
+/* DDR: cache cacheable */
+#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE
+
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM | BATL_PP_10 |\
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM | BATU_BL_256M | BATU_VS |\
+ BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+
+/* unused */
+#define CONFIG_SYS_IBAT1L (0)
+#define CONFIG_SYS_IBAT1U (0)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_10 |\
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS |\
+ BATU_VP)
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+
+/* unused */
+#define CONFIG_SYS_IBAT3L (0)
+#define CONFIG_SYS_IBAT3U (0)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 |\
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_64M |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+
+/* PCI MEM space: cacheable */
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 |\
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
+
+/*
+ * I2C EEPROM settings
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x4000
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR 0xFFD00000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+
+/*
+ * Video
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501_PCI
+#define VIDEO_FB_LITTLE_ENDIAN
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
+
+/*
+ * SPI
+ */
+#define CONFIG_MPC8XXX_SPI
+
+/*
+ * USB
+ */
+#define CONFIG_SYS_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_HAS_FSL_DR_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+/*
+ *
+ */
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "s"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY 1000
+
+#define MV_CI MergerBox
+#define MV_VCI MergerBox
+#define MV_FPGA_DATA 0xfc100000
+#define MV_FPGA_SIZE 0x00200000
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define MV_KERNEL_ADDR_RAM 0x02800000
+#define MV_DTB_ADDR_RAM 0x00600000
+#define MV_INITRD_ADDR_RAM 0x01000000
+#define MV_FITADDR 0xfc300000
+#define MV_SPLAH_ADDR 0xffe00000
+
+#define CONFIG_BOOTCOMMAND "run i2c_init;if test ${boot_sqfs} -eq 1;"\
+ "then; run fitboot;else;run ubiboot;fi;"
+#define CONFIG_BOOTARGS "console=ttyS0,115200n8"
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console_nr=0\0"\
+ "stdin=serial\0"\
+ "stdout=serial\0"\
+ "stderr=serial\0"\
+ "boot_sqfs=1\0"\
+ "usb_dr_mode=host\0"\
+ "bootfile=MergerBox.fit\0"\
+ "baudrate=" MK_STR(CONFIG_BAUDRATE) "\0"\
+ "fpga=0\0"\
+ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0"\
+ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"\
+ "mv_kernel_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"\
+ "mv_initrd_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0"\
+ "mv_dtb_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0"\
+ "uboota=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"\
+ "fitaddr=" MK_STR(MV_FITADDR) "\0"\
+ "mv_version=" U_BOOT_VERSION "\0"\
+ "mtdids=" MTDIDS_DEFAULT "\0"\
+ "mtdparts=" MTDPARTS_DEFAULT "\0"\
+ "dhcp_client_id=" MK_STR(MV_CI) "\0"\
+ "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0"\
+ "upd_uboot=dhcp;tftp bdi2000/u-boot-mergerbox-xp.bin;"\
+ "protect off all;erase $uboota +0xC0000;"\
+ "cp.b $loadaddr $uboota $filesize\0"\
+ "upd_fpga=dhcp;tftp MergerBox.rbf;erase $fpgadata +$fpgadatasize;"\
+ "cp.b $loadaddr $fpgadata $filesize\0"\
+ "upd_fit=dhcp;tftp MergerBox.fit;erase $fitaddr +0x1000000;"\
+ "cp.b $loadaddr $fitaddr $filesize\0"\
+ "addsqshrfs=set bootargs $bootargs root=/dev/ram ro "\
+ "rootfstype=squashfs\0"\
+ "addubirfs=set bootargs $bootargs ubi.mtd=9 root=ubi0:rootfs rw "\
+ "rootfstype=ubifs\0"\
+ "addusbrfs=set bootargs $bootargs root=/dev/sda1 rw "\
+ "rootfstype=ext3 usb-storage.delay_use=1 rootdelay=3\0"\
+ "netusbboot=bootp;run fpganetload fitnetload addusbrfs doboot\0"\
+ "netubiboot= bootp;run fpganetload fitnetload addubirfs doboot\0"\
+ "ubiboot=run fitprep addubirfs;set mv_initrd_ram -;run doboot\0"\
+ "doboot=bootm $mv_kernel_ram $mv_initrd_ram $mv_dtb_ram\0"\
+ "fitprep=imxtract $fitaddr kernel $mv_kernel_ram;"\
+ "imxtract $fitaddr ramdisk $mv_initrd_ram;"\
+ "imxtract $fitaddr fdt $mv_dtb_ram\0"\
+ "fdtprep=fdt addr $mv_dtb_ram;fdt boardsetup\0"\
+ "fitboot=run fitprep fdtprep addsqshrfs doboot\0"\
+ "i2c_init=run i2c_speed init_sdi_tx i2c_init_pll\0"\
+ "i2c_init_pll=i2c mw 65 9 2;i2c mw 65 9 0;i2c mw 65 5 2b;"\
+ "i2c mw 65 7 f;i2c mw 65 8 f;i2c mw 65 11 40;i2c mw 65 12 40;"\
+ "i2c mw 65 13 40; i2c mw 65 14 40; i2c mw 65 a 0\0"\
+ "i2c_speed=i2c dev 0;i2c speed 300000;i2c dev 1;i2c speed 120000\0"\
+ "init_sdi_tx=i2c mw 21 6 0;i2c mw 21 2 0;i2c mw 21 3 0;sleep 1;"\
+ "i2c mw 21 2 ff;i2c mw 21 3 3c\0"\
+ "splashimage=" MK_STR(MV_SPLAH_ADDR) "\0"\
+ ""
+
+#undef MK_STR
+#undef XMK_STR
+
+/*
+ * FPGA
+ */
+#define CONFIG_FPGA_COUNT 1
+#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
+
+#endif
--
1.7.0.4
More information about the U-Boot
mailing list