[U-Boot] Please pull u-boot-mpc85xx.git
Wolfgang Denk
wd at denx.de
Tue Apr 5 12:26:03 CEST 2011
Dear Kumar Gala,
In message <alpine.LFD.2.00.1104040913320.20731 at right.am.freescale.net> you wrote:
> The following changes since commit 19b54a701811220221fc4d5089a2bb18892018ca:
>
> Prepare v2011.03 (2011-03-31 23:45:36 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-mpc85xx.git master
Pulling fails with a merge conflict in drivers/usb/host/ehci-pci.c;
please check.
> Dipen Dudhat (1):
> powerpc/85xx: Add support for Integrated Flash Controller (IFC)
>
> Haiying Wang (2):
> powerpc/85xx: Refactor Qman/Portal support to be shared between SoCs
> powerpc/85xx: load ucode from nand flash before qe_init
>
> Jerry Huang (1):
> powerpc/85xx: Add eSDHC support on P2020DS
>
> Jiang Yutang (1):
> powerpc/85xx: Add 36-bit address map support to P1022DS
>
> Kumar Gala (16):
> powerpc/85xx: Remove DATARATE_*_MHZ defines in static ddr init
> powerpc/85xx: Declare fsl_ddr_set_memctl_regs in <asm/fsl_ddr_sdram.h>
> powerpc/85xx: Add some defines for P2040, P3041, P5010, P5020
> powerpc: Move cpu specific lmb reserve to arch_lmb_reserve
> powerpc/85xx: Remove config.mk for nand linker script
> powerpc/8xxx: Replace fsl_ddr_get_mem_data_rate with get_ddr_freq()
> powerpc/8xxx: Refactor fsl_ddr_get_spd into common code from board
> powerpc/85xx: Cleanup some QE related defines
> powerpc: Add cpu_secondary_init_r to allow for initialization post env setup
> powerpc/85xx: Don't build read_tlbcam_entry for CONFIG_NAND_SPL
> powerpc/8xxx: Fix LAW init to respect pre-initialized entries
> powerpc/85xx: Support for Freescale P1024/P1025 processor
> powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE
> powerpc/85xx: Fixup determining PME, FMan freq
> powerpc/85xx: Fix determining Fman freq on P1023
> powerpc/8xxx: Fix typo for address hashing message
>
> Kyle Moffett (2):
> fsl_ddr: Don't use full 64-bit divides on 32-bit PowerPC
> mpc8xxx: DDR2/DDR3: Clean up DIMM-type switch statements
>
> Laurentiu TUDOR (1):
> powerpc/85xx: Fix setting of LIODN prop in PCIe nodes on P3041/P5020
>
> Li Yang (2):
> powerpc/85xx: Update P2020DS default env settings
> tsec: add AR8021 PHY support
>
> Pankaj Chauhan (1):
> powerpc/85xx: Extend ethernet device tree stashing parameters for "fsl,etsec2"
>
> Poonam Aggrwal (6):
> powerpc/85xx: Use BR_PHYS_ADDR macro to setup BRs on P1_P2_RDB
> fsl_ddr: Adds 16 bit DDR Data width option
> powerpc/85xx: Adds some P1010/P1014 SoC configuration defines
> powerpc/85xx: Removed P1/P2 RDB RevB support
> powerpc/85xx: Optimized DDR settings for 800MT/s on P1/P2 RDB
> powerpc/85xx: Add 36-bit physical addressing support for P1_P2_RDB
>
> Prabhakar Kushwaha (2):
> powerpc/85xx: Add SERDES support for P1010/P1014
> fsl_pci: Add support for FSL PCIe controllers v2.x
>
> Priyanka Jain (3):
> powerpc/85xx: Corrected sdhc clock value for P1010
> powerpc/85xx: Use DDR for RAMBOOT instead of L2 SRAM on p1_p2_rdb
> powerpc/85xx: Read board switch settings on p1_p2_rdb
>
> Roy Zang (1):
> powerpc/85xx: Add support for Freescale P1023/P1017 Processors
>
> Timur Tabi (2):
> p1022ds: allow for board-specific ngPIXIS functions
> fsl: obsolete NXID v0 EEPROMs, automatically upgrade them to NXID v1
>
> York Sun (2):
> powerpc/85xx: Update fixed DDR3 timing table for P4080DS
> powerpc/8xxx: Display DIMM model
>
> Zhao Chenhui (4):
> echi: add ULI1575 PCI ID
> powerpc/85xx: Replace memctl_intlv_ctl with hwconfig on MPC8572DS
> powerpc/85xx: Disable ECC in considering performance on MPC8572DS
> powerpc/85xx: Add support for ULI1575 PCI EHCI module on MPC8572DS
>
> bhaskar upadhaya (1):
> powerpc/85xx: Update timer-frequency prop in ptp_timer node of device tree
>
> arch/powerpc/cpu/mpc85xx/Makefile | 14 +-
> arch/powerpc/cpu/mpc85xx/cpu.c | 7 +-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 32 +-
> arch/powerpc/cpu/mpc85xx/fdt.c | 12 +
> arch/powerpc/cpu/mpc85xx/p1010_serdes.c | 75 ++
> arch/powerpc/cpu/mpc85xx/p1023_serdes.c | 53 ++
> arch/powerpc/cpu/mpc85xx/p3041_ids.c | 10 +-
> arch/powerpc/cpu/mpc85xx/p4080_ids.c | 8 +-
> arch/powerpc/cpu/mpc85xx/p5020_ids.c | 10 +-
> arch/powerpc/cpu/mpc85xx/portals.c | 32 +-
> arch/powerpc/cpu/mpc85xx/speed.c | 48 +-
> arch/powerpc/cpu/mpc85xx/tlb.c | 4 +-
> arch/powerpc/cpu/mpc8xxx/Makefile | 1 +
> arch/powerpc/cpu/mpc8xxx/cpu.c | 14 +-
> arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 4 +-
> arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 1 -
> arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c | 23 +-
> arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 43 +-
> .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 11 +-
> arch/powerpc/cpu/mpc8xxx/ddr/main.c | 63 ++-
> arch/powerpc/cpu/mpc8xxx/ddr/util.c | 60 +-
> arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 84 ++
> arch/powerpc/include/asm/config.h | 2 +
> arch/powerpc/include/asm/config_mpc85xx.h | 117 +++
> arch/powerpc/include/asm/fsl_ddr_sdram.h | 3 +
> arch/powerpc/include/asm/fsl_ifc.h | 957 ++++++++++++++++++++
> arch/powerpc/include/asm/fsl_law.h | 4 +-
> arch/powerpc/include/asm/fsl_liodn.h | 14 +-
> arch/powerpc/include/asm/fsl_pci.h | 20 +-
> arch/powerpc/include/asm/immap_85xx.h | 35 +-
> arch/powerpc/include/asm/immap_qe.h | 98 +--
> arch/powerpc/include/asm/processor.h | 12 +
> arch/powerpc/lib/board.c | 14 +
> arch/powerpc/lib/bootm.c | 5 +
> board/freescale/common/ngpixis.c | 56 +-
> board/freescale/common/ngpixis.h | 8 +-
> board/freescale/common/sys_eeprom.c | 50 +-
> board/freescale/corenet_ds/corenet_ds.c | 11 +-
> board/freescale/corenet_ds/ddr.c | 49 +-
> board/freescale/corenet_ds/p4080ds_ddr.c | 24 +-
> board/freescale/mpc8536ds/config.mk | 30 -
> board/freescale/mpc8536ds/ddr.c | 26 -
> board/freescale/mpc8540ads/ddr.c | 30 -
> board/freescale/mpc8541cds/ddr.c | 26 -
> board/freescale/mpc8544ds/ddr.c | 27 -
> board/freescale/mpc8548cds/ddr.c | 27 -
> board/freescale/mpc8555cds/ddr.c | 26 -
> board/freescale/mpc8560ads/ddr.c | 30 -
> board/freescale/mpc8568mds/ddr.c | 28 -
> board/freescale/mpc8569mds/config.mk | 30 -
> board/freescale/mpc8569mds/ddr.c | 28 -
> board/freescale/mpc8572ds/config.mk | 30 -
> board/freescale/mpc8572ds/ddr.c | 28 -
> board/freescale/mpc8572ds/mpc8572ds.c | 11 +-
> board/freescale/mpc8610hpcd/ddr.c | 26 -
> board/freescale/mpc8641hpcn/ddr.c | 37 +-
> board/freescale/mpc8641hpcn/mpc8641hpcn.c | 11 +-
> board/freescale/p1022ds/ddr.c | 23 -
> board/freescale/p1022ds/diu.c | 66 ++-
> board/freescale/p1022ds/p1022ds.c | 13 +-
> board/freescale/p1_p2_rdb/config.mk | 31 -
> board/freescale/p1_p2_rdb/ddr.c | 47 +-
> board/freescale/p1_p2_rdb/p1_p2_rdb.c | 66 +-
> board/freescale/p1_p2_rdb/tlb.c | 22 +-
> board/freescale/p2020ds/ddr.c | 24 -
> board/freescale/p2020ds/p2020ds.c | 23 +-
> board/sbc8548/ddr.c | 27 -
> board/sbc8560/ddr.c | 30 -
> board/sbc8641d/ddr.c | 35 -
> board/sbc8641d/sbc8641d.c | 9 -
> board/socrates/ddr.c | 27 -
> board/stx/stxgp3/ddr.c | 30 -
> board/stx/stxssa/ddr.c | 29 -
> board/xes/xpedite517x/ddr.c | 32 +-
> board/xes/xpedite517x/xpedite517x.c | 9 -
> board/xes/xpedite520x/ddr.c | 22 +-
> board/xes/xpedite537x/ddr.c | 22 +-
> board/xes/xpedite537x/xpedite537x.c | 9 -
> board/xes/xpedite550x/ddr.c | 20 +-
> board/xes/xpedite550x/xpedite550x.c | 9 -
> boards.cfg | 13 +
> common/ddr_spd.c | 2 +-
> drivers/misc/fsl_law.c | 20 +
> drivers/net/tsec.c | 23 +
> drivers/pci/fsl_pci_init.c | 12 +-
> drivers/usb/host/ehci-pci.c | 1 +
> include/common.h | 4 +
> include/configs/MPC8536DS.h | 1 +
> include/configs/MPC8569MDS.h | 4 +-
> include/configs/MPC8572DS.h | 17 +-
> include/configs/MPC8610HPCD.h | 2 +-
> include/configs/P1022DS.h | 48 +-
> include/configs/P1_P2_RDB.h | 83 ++-
> include/configs/P2020DS.h | 49 +-
> include/configs/corenet_ds.h | 1 +
> include/configs/xpedite550x.h | 2 +-
> include/ddr_spd.h | 28 +-
> 97 files changed, 2233 insertions(+), 1241 deletions(-)
> create mode 100644 arch/powerpc/cpu/mpc85xx/p1010_serdes.c
> create mode 100644 arch/powerpc/cpu/mpc85xx/p1023_serdes.c
> create mode 100644 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
> create mode 100644 arch/powerpc/include/asm/fsl_ifc.h
> delete mode 100644 board/freescale/mpc8536ds/config.mk
> delete mode 100644 board/freescale/mpc8569mds/config.mk
> delete mode 100644 board/freescale/mpc8572ds/config.mk
> delete mode 100644 board/freescale/p1_p2_rdb/config.mk
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"There are things that are so serious that you can only joke about
them" - Heisenberg
More information about the U-Boot
mailing list