[U-Boot] [GIT PULL] Pull request: u-boot-imx -- all ARM custodians please read

Albert ARIBAUD albert.u.boot at aribaud.net
Fri Apr 22 19:48:36 CEST 2011


Le 22/04/2011 14:50, Stefano Babic a écrit :
> Hi Albert,
>
> my new pull request. Take care that I drop patches for the MX53 LOCO
> board as discussed on the mailing list (they were part of last pull
> request, commit 96c1b214b47416ae07aac267e45a600cc9567eed in uboot-arm).
> This pull is against u-boot tree, as after dropping the patches I
> rebased on it.
>
> The following changes since commit 735eb0f0e66b544b1dfaf6c43ce6e4bd9ae64b5e:
>
>    tools/env: fix redundant env flag comparison (2011-04-21 00:25:08 +0200)
>
> are available in the git repository at:
>    git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (5):
>        mx25: Make the UART port number explicit in its setup function
>        ARM: mx31: Print the silicon version
>        MX31: Introduce get_reset_cause()
>        MX31: mx31pdk: Make the board name simpler.
>        ARM: MX31: Fix file name label
>
> Jason Liu (1):
>        MX5: factor out boot cause funciton to common code
>
> Liu Hui-R64343 (2):
>        MX53: drop config.mk from mx53evk
>        MX5: Enable flat-device-tree support on mx51/53 evk board
>
> Stefano Babic (6):
>        Makefile: change rule to build IMX image
>        MX51: drop config.mk from mx51evk
>        MX31: add support for MX31 watchdog
>        MX31: qong: add watchdog
>        IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
>        MX31: drop warnings in get_cpu_rev
>
>   Makefile                                           |    2 +-
>   arch/arm/cpu/arm1136/mx31/devices.c                |    4 +-
>   arch/arm/cpu/arm1136/mx31/generic.c                |   59
> +++++++++++++++++++-
>   arch/arm/cpu/arm1136/mx31/timer.c                  |   40 +++++++++++++-
>   arch/arm/cpu/arm926ejs/mx25/generic.c              |    2 +-
>   arch/arm/cpu/armv7/mx5/soc.c                       |   28 +++++++++
>   arch/arm/include/asm/arch-mx31/{mx31.h =>  clock.h} |    6 +-
>   .../asm/arch-mx31/{mx31-regs.h =>  imx-regs.h}      |   41 +++++++++++++-
>   board/davedenx/qong/fpga.c                         |    4 +-
>   board/davedenx/qong/lowlevel_init.S                |    2 +-
>   board/davedenx/qong/qong.c                         |   16 +++++-
>   board/freescale/mx31ads/lowlevel_init.S            |    2 +-
>   board/freescale/mx31ads/mx31ads.c                  |    4 +-
>   board/freescale/mx31pdk/lowlevel_init.S            |    2 +-
>   board/freescale/mx31pdk/mx31pdk.c                  |    6 +-
>   board/freescale/mx51evk/config.mk                  |   25 --------
>   board/freescale/mx53evk/config.mk                  |   24 --------
>   board/imx31_phycore/imx31_phycore.c                |    4 +-
>   board/imx31_phycore/lowlevel_init.S                |    2 +-
>   board/karo/tx25/tx25.c                             |    4 +-
>   board/logicpd/imx31_litekit/imx31_litekit.c        |    4 +-
>   board/logicpd/imx31_litekit/lowlevel_init.S        |    2 +-
>   boards.cfg                                         |    4 +-
>   drivers/gpio/mxc_gpio.c                            |    5 --
>   drivers/i2c/mxc_i2c.c                              |    7 +--
>   drivers/serial/serial_mxc.c                        |    4 -
>   drivers/spi/mxc_spi.c                              |    9 +--
>   drivers/usb/host/ehci-mxc.c                        |    2 +-
>   drivers/video/mx3fb.c                              |    6 +-
>   include/configs/imx31_litekit.h                    |    2 +-
>   include/configs/mx31ads.h                          |    2 +-
>   include/configs/mx31pdk.h                          |    2 +-
>   include/configs/mx51evk.h                          |    5 ++
>   include/configs/mx53evk.h                          |    3 +
>   include/configs/qong.h                             |    3 +-
>   nand_spl/nand_boot_fsl_nfc.c                       |    4 -
>   36 files changed, 221 insertions(+), 120 deletions(-)
>   rename arch/arm/include/asm/arch-mx31/{mx31.h =>  clock.h} (92%)
>   rename arch/arm/include/asm/arch-mx31/{mx31-regs.h =>  imx-regs.h} (97%)
>   delete mode 100644 board/freescale/mx51evk/config.mk
>   delete mode 100644 board/freescale/mx53evk/config.mk

This is causing a forced rebase on u-boot-arm/master of course.

ARM Custodians who already had a pull request acknowledged please check 
that I have not accidentally dropped any of the commits you had 
requested a pull for. Currently, above u-boot/master I have the following:

Albert ARIBAUD (1):
       Replace obsolete e-mail address

Alexander Holler (4):
       omap3_beagle: enable the use of a plain text file
       OMAP3: Change some USB related MUX values
       OMAP3: Add support for DPLL5 (usbhost)
       omap3_beagle: enable EHCI and USB storage.

Enric Balletbo i Serra (2):
       ARM: OMAP3: Revamp IGEP v2 default
       ARM: OMAP3: Revamp IGEP module default configuration

Eric Cooper (1):
       ARM: fix stack pointer adjustment in board_init_f()

Fabio Estevam (6):
       mx25: Make the UART port number explicit in its setup function
       ARM: mx31: Print the silicon version
       MX31: Introduce get_reset_cause()
       MX31: mx31pdk: Make the board name simpler.
       ARM: MX31: Fix file name label
       MX25: tx25: Add _end section on nand_spl

Igor Grinberg (9):
       OMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file scope
       OMAP3: CM-T35: update config
       OMAP3: CM-T35: update board files header information
       OMAP3: CM-T35: update MAINTAINERS file
       OMAP3: CM-T35: add MMC1 pinmux
       OMAP3: CM-T35: fix mmc
       OMAP3: CM-T35: remove redundand i2c initialization
       OMAP3: CM-T35: enable the green LED
       OMAP3: CM-T35: Add support for CM-T3730

Jason Kridner (2):
       Add 'led' command
       BeagleBoard: Added LED driver

Jason Liu (1):
       MX5: factor out boot cause funciton to common code

Koen Kooi (2):
       OMAP3: BeagleBoard: add xM rev B to ID table
       OMAP3: BeagleBoard: add more expansionboard IDs

Lei Wen (6):
       pxa: move i2c driver to the common place
       mv_i2c: fix timeout value to be consistent with comments
       mv_i2c: use structure to replace the direclty define
       I2C: add i2c support for Pantheon platform
       I2C: mv_i2c: add multi bus support
       I2C: add i2c support for Armada100 platform

Liu Hui-R64343 (2):
       MX53: drop config.mk from mx53evk
       MX5: Enable flat-device-tree support on mx51/53 evk board

Luca Ceresoli (4):
       ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX
       ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions
       ARMV7: OMAP3: Cleanup extern variables in mem.c
       ARMV7: OMAP3: Add support for Comelit DIG297 board

Macpaul Lin (4):
       ftpmu010: fix relocation and enhance features
       ftpmu010.h: add asm support used by lowlevel_init
       fttmr010: move fttmr010 header to include/faraday
       a320evb: fix include path of timer fttmr010

Matt Waddel (1):
       ARMV7: Vexpress: Remove config.mk

Matthias Weisser (1):
       arm: Use optimized memcpy and memset from linux

Minkyu Kang (1):
       Don't grab memory for LCD if FB address is defined

Po-Yu Chuang (2):
       power: ftpmu010: move drivers/power/ftpmu010.h to include/faraday
       arm: a320: use new ftpmu010 API

Rogan Dawes (1):
       Orion5x: Correct DRAM bank detection

Srinath (1):
       ARMV7: AM3517/05: Add support for CraneBoard.

Stefano Babic (7):
       Makefile: change rule to build IMX image
       MX51: drop config.mk from mx51evk
       MX31: add support for MX31 watchdog
       MX31: qong: add watchdog
       IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
       MX31: drop warnings in get_cpu_rev
       MX31: mx31pdk: fix nand_spl

Steve Kipisz (1):
       OMAP3: BeagleBoard: Enable pullups on i2c2.

Sughosh Ganu (1):
       Fix the issue of _end symbol not being found while building

Tom Warren (4):
       arm: Tegra2: add support for A9 CPU init
       arm: Tegra2: Add missing PLLX init
       arm: Tegra2: GPIO: Add basic GPIO definitions
       arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list