[U-Boot] [PATCH] powerpc/85xx: Add P1021 specific QE and UEC support

[Kumar Gala]

On Mar 6, 2011, at 10:17 PM, Kumar Gala wrote:

> From: Haiying Wang <Haiying.Wang at freescale.com>
> 
> P1021 has some QE pins which need to be set in pmuxcr register before
> using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and
> UCC5 in Eth mode.  QE9 and QE12 are set for MII management. QE12 needs to
> be released after MII access because QE12 pin is muxed with LBCTL signal.
> 
> Also added relevant QE support defines unique to P1021.
> 
> The P1021 QE is shared on P1012, P1016, and P1025.
> 
> Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
> ---
> arch/powerpc/cpu/mpc85xx/speed.c          |    8 +++++-
> arch/powerpc/include/asm/config_mpc85xx.h |   12 +++++++++
> arch/powerpc/include/asm/immap_85xx.h     |   38 ++++++++++++++++++++++-------
> drivers/qe/uec.c                          |   37 +++++++++++++++++++++++++++-
> 4 files changed, 84 insertions(+), 11 deletions(-)

applied to 85xx

- k