[U-Boot] [PATCH V2] MX31: change return value of get_cpu_rev

[Detlev Zundel]

Hi Stefano,

> Drop warnings in get_cpu_rev and changes the return value
> (a u32 instead of char * is returned) of the function
> to be coherent with other processors.
>
> Signed-off-by: Stefano Babic <sbabic at denx.de>
> CC: Detlev Zundel <dzu at denx.de>
> CC: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>
> Changes:
> - commit message
> - "unknown" will be printed together with the
> 	revision register if the value of the register
> 	cannot be translated.
>
>  arch/arm/cpu/arm1136/mx31/generic.c       |   31 ++++++++++++++++------------
>  arch/arm/include/asm/arch-mx31/imx-regs.h |    2 +-
>  2 files changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
> index 18572b9..af6da91 100644
> --- a/arch/arm/cpu/arm1136/mx31/generic.c
> +++ b/arch/arm/cpu/arm1136/mx31/generic.c
> @@ -107,18 +107,18 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
>  }
>  
>  struct mx3_cpu_type mx31_cpu_type[] = {
> -	{ .srev = 0x00,	.v = "1.0"  },
> -	{ .srev = 0x10,	.v = "1.1"  },
> -	{ .srev = 0x11,	.v = "1.1"  },
> -	{ .srev = 0x12,	.v = "1.15" },
> -	{ .srev = 0x13,	.v = "1.15" },
> -	{ .srev = 0x14,	.v = "1.2"  },
> -	{ .srev = 0x15,	.v = "1.2"  },
> -	{ .srev = 0x28,	.v = "2.0"  },
> -	{ .srev = 0x29,	.v = "2.0"  },
> +	{ .srev = 0x00, .v = 0x10 },
> +	{ .srev = 0x10, .v = 0x11 },
> +	{ .srev = 0x11, .v = 0x11 },
> +	{ .srev = 0x12, .v = 0x1F },
> +	{ .srev = 0x13, .v = 0x1F },
> +	{ .srev = 0x14, .v = 0x12 },
> +	{ .srev = 0x15, .v = 0x12 },
> +	{ .srev = 0x28, .v = 0x20 },
> +	{ .srev = 0x29, .v = 0x20 },
>  };
>  
> -char *get_cpu_rev(void)
> +u32 get_cpu_rev(void)
>  {
>  	u32 i, srev;
>  
> @@ -129,7 +129,8 @@ char *get_cpu_rev(void)
>  	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
>  		if (srev == mx31_cpu_type[i].srev)
>  			return mx31_cpu_type[i].v;
> -		return "unknown";
> +
> +	return srev | 0x8000;
>  }
>  
>  char *get_reset_cause(void)
> @@ -161,8 +162,12 @@ char *get_reset_cause(void)
>  #if defined(CONFIG_DISPLAY_CPUINFO)
>  int print_cpuinfo (void)
>  {
> -	printf("CPU:   Freescale i.MX31 rev %s at %d MHz.",
> -			get_cpu_rev(), mx31_get_mcu_main_clk() / 1000000);
> +	u32 srev = get_cpu_rev();
> +
> +	printf("CPU:   Freescale i.MX31 rev %d.%d %s at %d MHz.",

Use a space less here, i.e. "rev %d.%d%s at %d"...

> +			(srev & 0xF0) >> 4, (srev & 0x0F),
> +			((srev & 0x8000) ? "unknown" : ""),

.. and " unknown" here, so we always get only one space.

Ok, ok, I'm getting carried away ;)

Cheers
  Detlev

-- 
SWYM XYZ (Sympathize with your machinery).  [..] In fact it is often
called a no-op, because it performs no operation.  It does, however,
keep the machine running smoothly, just as real-world swimming helps
to keep programmers healthy.             -- Donald Knuth, Fascicle 1
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de