[U-Boot] Pull request u-boot-marvell.git

[Prafulla Wadaskar]

Hi Albert

Please kindly pull
The following changes since commit 531bb02c0bfc783e95f1b761f18e15d6f565e357:
  Fabio Estevam (1):
        MX25: tx25: Add _end section on nand_spl

are available in the git repository at:

  u-boot-marvell.git master branch

Lei Wen (6):
      pxa: move i2c driver to the common place
      mv_i2c: fix timeout value to be consistent with comments
      mv_i2c: use structure to replace the direclty define
      I2C: add i2c support for Pantheon platform
      I2C: mv_i2c: add multi bus support
      I2C: add i2c support for Armada100 platform

Rogan Dawes (1):
      Orion5x: Correct DRAM bank detection

 arch/arm/cpu/arm926ejs/armada100/cpu.c         |   16 ++
 arch/arm/cpu/arm926ejs/orion5x/dram.c          |    2 +-
 arch/arm/cpu/arm926ejs/pantheon/cpu.c          |   12 +
 arch/arm/cpu/pxa/Makefile                      |    1 -
 arch/arm/cpu/pxa/cpu.c                         |   10 +
 arch/arm/include/asm/arch-armada100/config.h   |   12 +
 arch/arm/include/asm/arch-armada100/mfp.h      |   40 ++--
 arch/arm/include/asm/arch-orion5x/orion5x.h    |    1 +
 arch/arm/include/asm/arch-pantheon/config.h    |   10 +
 arch/arm/include/asm/arch-pantheon/cpu.h       |    4 +-
 arch/arm/include/asm/arch-pantheon/mfp.h       |    6 +-
 arch/arm/include/asm/arch-pxa/pxa-regs.h       |   56 -----
 board/Marvell/aspenite/aspenite.c              |    5 +
 board/Marvell/dkb/dkb.c                        |    4 +
 board/innokom/innokom.c                        |    9 +-
 drivers/i2c/Makefile                           |    1 +
 arch/arm/cpu/pxa/i2c.c => drivers/i2c/mv_i2c.c |  294 ++++++++++++-----------
 drivers/i2c/mv_i2c.h                           |   83 +++++++
 include/configs/aspenite.h                     |    1 +
 include/configs/dkb.h                          |    2 +
 include/configs/innokom.h                      |    2 +
 include/configs/xm250.h                        |    2 +
 22 files changed, 345 insertions(+), 228 deletions(-)
 rename arch/arm/cpu/pxa/i2c.c => drivers/i2c/mv_i2c.c (65%)
 create mode 100644 drivers/i2c/mv_i2c.h

Regards..
Prafulla . .