[U-Boot] [PATCH v3 4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board

[Luca Ceresoli]

Wolfgang Denk wrote:
> Dear Luca Ceresoli,
>
> In message<4DA0C56D.7030705 at comelit.it>  you wrote:

...

> Observations:
>> a. arch/arm/cpu/armv7/omap3/mem.c computes a value for those variables based
>>      on config-values in the config file (see gpmc_init(), bottom half):
> Note that arch/arm/cpu/armv7/omap3/mem.c is also the only file in the
> whole U-Boot source tree which references these variables:
>
> ->  egrep -lR 'boot_flash_base|boot_flash_off|boot_flash_sec|boot_flash_type' *
> arch/arm/cpu/armv7/omap3/mem.c
> include/configs/am3517_evm.h
> include/configs/devkit8000.h
> include/configs/omap3_beagle.h
> include/configs/cm_t35.h
> include/configs/omap3_pandora.h
> include/configs/omap3_sdp3430.h
> include/configs/omap3_zoom1.h
> include/configs/omap3_zoom2.h
> include/configs/omap3_overo.h
> include/configs/omap3_evm.h

Would you please read points c. and d. of my e-mail?

Luca