[U-Boot] [PATCH v2 5/6] phylib: Add a bunch of PHY drivers from tsec
Andy Fleming
afleming at freescale.com
Tue Apr 5 23:59:53 CEST 2011
The tsec driver had a bunch of PHY drivers already written. This
converts them all into PHY Lib drivers, and serves as the first
set of PHY drivers for PHY Lib.
While doing that, cleaned up a number of magic numbers (though
not all of them, as PHY vendors like to keep their numbers as
magical as possible). Also, noticed that almost all of the
vitesse/cicada PHYs had the same config/parse/startup functions,
so those have been collapsed into one.
Signed-off-by: Andy Fleming <afleming at freescale.com>
---
* Added teranetics_init() to init function
* Sorted init functions in phy_init and in phy.h
* Sorted PHYs in drivers/net/phy/Makefile
* GPL v2+ on all new files
* Left the 500ms delay after autonegotiation for PHY drivers that had it,
as I don't want to break the driver-specific functionality. I suspect that
either we've already fixed the bug this was really working around, or we
will need a bug fix in the generic code. Either way, this code doesn't
change the previous behavior, and can always be fixed at a later date,
when one of us has time to actually test it out.
* Added many constants and consolidated the vitesse functions
drivers/net/phy/Makefile | 11 ++
drivers/net/phy/atheros.c | 48 ++++++
drivers/net/phy/broadcom.c | 286 ++++++++++++++++++++++++++++++++
drivers/net/phy/davicom.c | 98 +++++++++++
drivers/net/phy/lxt.c | 87 ++++++++++
drivers/net/phy/marvell.c | 376 ++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/micrel.c | 40 +++++
drivers/net/phy/natsemi.c | 96 +++++++++++
drivers/net/phy/phy.c | 31 ++++
drivers/net/phy/realtek.c | 130 +++++++++++++++
drivers/net/phy/teranetics.c | 54 ++++++
drivers/net/phy/vitesse.c | 242 +++++++++++++++++++++++++++
include/phy.h | 11 ++
include/phylib_all_drivers.h | 25 +++
14 files changed, 1535 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/phy/atheros.c
create mode 100644 drivers/net/phy/broadcom.c
create mode 100644 drivers/net/phy/davicom.c
create mode 100644 drivers/net/phy/lxt.c
create mode 100644 drivers/net/phy/marvell.c
create mode 100644 drivers/net/phy/micrel.c
create mode 100644 drivers/net/phy/natsemi.c
create mode 100644 drivers/net/phy/realtek.c
create mode 100644 drivers/net/phy/teranetics.c
create mode 100644 drivers/net/phy/vitesse.c
create mode 100644 include/phylib_all_drivers.h
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 7cb1094..8e205ac 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -27,7 +27,18 @@ LIB := $(obj)libphy.o
COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
COBJS-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o
+
COBJS-$(CONFIG_PHYLIB) += phy.o
+COBJS-$(CONFIG_PHY_ATHEROS) += atheros.o
+COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o
+COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o
+COBJS-$(CONFIG_PHY_LXT) += lxt.o
+COBJS-$(CONFIG_PHY_MARVELL) += marvell.o
+COBJS-$(CONFIG_PHY_MICREL) += micrel.o
+COBJS-$(CONFIG_PHY_NATSEMI) += natsemi.o
+COBJS-$(CONFIG_PHY_REALTEK) += realtek.o
+COBJS-$(CONFIG_PHY_TERANETICS) += teranetics.o
+COBJS-$(CONFIG_PHY_VITESSE) += vitesse.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
new file mode 100644
index 0000000..a51be92
--- /dev/null
+++ b/drivers/net/phy/atheros.c
@@ -0,0 +1,48 @@
+/*
+ * Atheros PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+static int ar8021_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);
+
+ return 0;
+}
+
+struct phy_driver AR8021_driver = {
+ .name = "AR8021",
+ .uid = 0x4dd040,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = ar8021_config,
+ .startup = genphy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+int atheros_init(void)
+{
+ phy_register(&AR8021_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
new file mode 100644
index 0000000..fe2e28e
--- /dev/null
+++ b/drivers/net/phy/broadcom.c
@@ -0,0 +1,286 @@
+/*
+ * Broadcom PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+/* Broadcom BCM54xx -- taken from linux sungem_phy */
+#define MIIM_BCM54xx_AUXCNTL 0x18
+#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) (((val & 0x7) << 12)|(val & 0x7))
+#define MIIM_BCM54xx_AUXSTATUS 0x19
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
+
+#define MIIM_BCM54XX_SHD 0x1c
+#define MIIM_BCM54XX_SHD_WRITE 0x8000
+#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
+#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
+#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
+ (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
+ MIIM_BCM54XX_SHD_DATA(data))
+
+#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
+#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
+#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
+#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
+
+/* Broadcom BCM5461S */
+static int bcm5461_config(struct phy_device *phydev)
+{
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int bcm54xx_parse_status(struct phy_device *phydev)
+{
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXSTATUS);
+
+ switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
+ MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
+ case 1:
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_10;
+ break;
+ case 2:
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_10;
+ break;
+ case 3:
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_100;
+ break;
+ case 5:
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_100;
+ break;
+ case 6:
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_1000;
+ break;
+ case 7:
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_1000;
+ break;
+ default:
+ printf("Auto-neg error, defaulting to 10BT/HD\n");
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int bcm54xx_startup(struct phy_device *phydev)
+{
+ /* Read the Status (2x to make sure link is right) */
+ genphy_update_link(phydev);
+ bcm54xx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Broadcom BCM5482S */
+/*
+ * "Ethernet at Wirespeed" needs to be enabled to achieve link in certain
+ * circumstances. eg a gigabit TSEC connected to a gigabit switch with
+ * a 4-wire ethernet cable. Both ends advertise gigabit, but can't
+ * link. "Ethernet at Wirespeed" reduces advertised speed until link
+ * can be achieved.
+ */
+static u32 bcm5482_read_wirespeed(struct phy_device *phydev, u32 reg)
+{
+ return (phy_read(phydev, MDIO_DEVAD_NONE, reg) & 0x8FFF) | 0x8010;
+}
+
+static int bcm5482_config(struct phy_device *phydev)
+{
+ unsigned int reg;
+
+ /* reset the PHY */
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+ reg |= BMCR_RESET;
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
+
+ /* Setup read from auxilary control shadow register 7 */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
+ MIIM_BCM54xx_AUXCNTL_ENCODE(7));
+ /* Read Misc Control register and or in Ethernet at Wirespeed */
+ reg = bcm5482_read_wirespeed(phydev, MIIM_BCM54xx_AUXCNTL);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg);
+
+ /* Initial config/enable of secondary SerDes interface */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
+ MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf));
+ /* Write intial value to secondary SerDes Contol */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
+ MIIM_BCM54XX_EXP_SEL_SSD | 0);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA,
+ BMCR_ANRESTART);
+ /* Enable copper/fiber auto-detect */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
+ MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201));
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+/*
+ * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
+ * 0x42 - "Operating Mode Status Register"
+ */
+static int bcm5482_is_serdes(struct phy_device *phydev)
+{
+ u16 val;
+ int serdes = 0;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
+ MIIM_BCM54XX_EXP_SEL_ER | 0x42);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
+
+ switch (val & 0x1f) {
+ case 0x0d: /* RGMII-to-100Base-FX */
+ case 0x0e: /* RGMII-to-SGMII */
+ case 0x0f: /* RGMII-to-SerDes */
+ case 0x12: /* SGMII-to-SerDes */
+ case 0x13: /* SGMII-to-100Base-FX */
+ case 0x16: /* SerDes-to-Serdes */
+ serdes = 1;
+ break;
+ case 0x6: /* RGMII-to-Copper */
+ case 0x14: /* SGMII-to-Copper */
+ case 0x17: /* SerDes-to-Copper */
+ break;
+ default:
+ printf("ERROR, invalid PHY mode (0x%x\n)", val);
+ break;
+ }
+
+ return serdes;
+}
+
+/*
+ * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
+ * Mode Status Register"
+ */
+static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
+{
+ u16 val;
+ int i = 0;
+
+ /* Wait 1s for link - Clause 37 autonegotiation happens very fast */
+ while (1) {
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
+ MIIM_BCM54XX_EXP_SEL_ER | 0x42);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
+
+ if (val & 0x8000)
+ break;
+
+ if (i++ > 1000) {
+ phydev->link = 0;
+ return 1;
+ }
+
+ udelay(1000); /* 1 ms */
+ }
+
+ phydev->link = 1;
+ switch ((val >> 13) & 0x3) {
+ case (0x00):
+ phydev->speed = 10;
+ break;
+ case (0x01):
+ phydev->speed = 100;
+ break;
+ case (0x02):
+ phydev->speed = 1000;
+ break;
+ }
+
+ phydev->duplex = (val & 0x1000) == 0x1000;
+
+ return 0;
+}
+
+/*
+ * Figure out if BCM5482 is in serdes or copper mode and determine link
+ * configuration accordingly
+ */
+static int bcm5482_startup(struct phy_device *phydev)
+{
+ if (bcm5482_is_serdes(phydev)) {
+ bcm5482_parse_serdes_sr(phydev);
+ phydev->port = PORT_FIBRE;
+ } else {
+ /* Wait for auto-negotiation to complete or fail */
+ genphy_update_link(phydev);
+ /* Parse BCM54xx copper aux status register */
+ bcm54xx_parse_status(phydev);
+ }
+
+ return 0;
+}
+
+static struct phy_driver BCM5461S_driver = {
+ .name = "Broadcom BCM5461S",
+ .uid = 0x2060c0,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &bcm5461_config,
+ .startup = &bcm54xx_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver BCM5464S_driver = {
+ .name = "Broadcom BCM5464S",
+ .uid = 0x2060b0,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &bcm5461_config,
+ .startup = &bcm54xx_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver BCM5482S_driver = {
+ .name = "Broadcom BCM5482S",
+ .uid = 0x143bcb0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &bcm5482_config,
+ .startup = &bcm5482_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int broadcom_init(void)
+{
+ phy_register(&BCM5482S_driver);
+ phy_register(&BCM5464S_driver);
+ phy_register(&BCM5461S_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
new file mode 100644
index 0000000..8367fa1
--- /dev/null
+++ b/drivers/net/phy/davicom.c
@@ -0,0 +1,98 @@
+/*
+ * Davicom PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+#define MIIM_DM9161_SCR 0x10
+#define MIIM_DM9161_SCR_INIT 0x0610
+
+/* DM9161 Specified Configuration and Status Register */
+#define MIIM_DM9161_SCSR 0x11
+#define MIIM_DM9161_SCSR_100F 0x8000
+#define MIIM_DM9161_SCSR_100H 0x4000
+#define MIIM_DM9161_SCSR_10F 0x2000
+#define MIIM_DM9161_SCSR_10H 0x1000
+
+/* DM9161 10BT Configuration/Status */
+#define MIIM_DM9161_10BTCSR 0x12
+#define MIIM_DM9161_10BTCSR_INIT 0x7800
+
+
+/* Davicom DM9161E */
+static int dm9161_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_ISOLATE);
+ /* Do not bypass the scrambler/descrambler */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_SCR,
+ MIIM_DM9161_SCR_INIT);
+ /* Clear 10BTCSR to default */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_10BTCSR,
+ MIIM_DM9161_10BTCSR_INIT);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int dm9161_parse_status(struct phy_device *phydev)
+{
+ int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_SCSR);
+
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int dm9161_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ dm9161_parse_status(phydev);
+
+ return 0;
+}
+
+static struct phy_driver DM9161_driver = {
+ .name = "Davicom DM9161E",
+ .uid = 0x181b880,
+ .mask = 0xffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &dm9161_config,
+ .startup = &dm9161_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int davicom_init(void)
+{
+ phy_register(&DM9161_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
new file mode 100644
index 0000000..d422c3a
--- /dev/null
+++ b/drivers/net/phy/lxt.c
@@ -0,0 +1,87 @@
+/*
+ * LXT PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+/* LXT971 Status 2 registers */
+#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
+#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
+#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
+#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
+
+
+/* LXT971 */
+static int lxt971_parse_status(struct phy_device *phydev)
+{
+ int mii_reg;
+ int speed;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_LXT971_SR2);
+ speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
+
+ switch (speed) {
+ case MIIM_LXT971_SR2_10HDX:
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+ break;
+ case MIIM_LXT971_SR2_10FDX:
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_FULL;
+ break;
+ case MIIM_LXT971_SR2_100HDX:
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_HALF;
+ break;
+ default:
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_FULL;
+ }
+
+ return 0;
+}
+
+static int lxt971_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ lxt971_parse_status(phydev);
+
+ return 0;
+}
+
+static struct phy_driver LXT971_driver = {
+ .name = "LXT971",
+ .uid = 0x1378e0,
+ .mask = 0xfffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &lxt971_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int lxt_init(void)
+{
+ phy_register(&LXT971_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
new file mode 100644
index 0000000..2a43b4f
--- /dev/null
+++ b/drivers/net/phy/marvell.c
@@ -0,0 +1,376 @@
+/*
+ * Marvell PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000
+
+/* 88E1011 PHY Status Register */
+#define MIIM_88E1xxx_PHY_STATUS 0x11
+#define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000
+#define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000
+#define MIIM_88E1xxx_PHYSTAT_100 0x4000
+#define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000
+#define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800
+#define MIIM_88E1xxx_PHYSTAT_LINK 0x0400
+
+#define MIIM_88E1xxx_PHY_SCR 0x10
+#define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060
+
+/* 88E1111 PHY LED Control Register */
+#define MIIM_88E1111_PHY_LED_CONTROL 24
+#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
+#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
+
+/* 88E1118 PHY defines */
+#define MIIM_88E1118_PHY_PAGE 22
+#define MIIM_88E1118_PHY_LED_PAGE 3
+
+/* 88E1121 PHY LED Control Register */
+#define MIIM_88E1121_PHY_LED_CTRL 16
+#define MIIM_88E1121_PHY_LED_PAGE 3
+#define MIIM_88E1121_PHY_LED_DEF 0x0030
+
+/* 88E1121 PHY IRQ Enable/Status Register */
+#define MIIM_88E1121_PHY_IRQ_EN 18
+#define MIIM_88E1121_PHY_IRQ_STATUS 19
+
+#define MIIM_88E1121_PHY_PAGE 22
+
+/* 88E1145 Extended PHY Specific Control Register */
+#define MIIM_88E1145_PHY_EXT_CR 20
+#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
+#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
+
+#define MIIM_88E1145_PHY_LED_CONTROL 24
+#define MIIM_88E1145_PHY_LED_DIRECT 0x4100
+
+#define MIIM_88E1145_PHY_PAGE 29
+#define MIIM_88E1145_PHY_CAL_OV 30
+
+#define MIIM_88E1149_PHY_PAGE 29
+
+/* Marvell 88E1011S */
+static int m88e1011s_config(struct phy_device *phydev)
+{
+ /* Reset and configure the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+/* Parse the 88E1011's status register for speed and duplex
+ * information
+ */
+static uint m88e1xxx_parse_status(struct phy_device *phydev)
+{
+ unsigned int speed;
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS);
+
+ if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) &&
+ !(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
+ int i = 0;
+
+ puts("Waiting for PHY realtime link");
+ while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
+ /* Timeout reached ? */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ phydev->link = 0;
+ break;
+ }
+
+ if ((i++ % 1000) == 0)
+ putc('.');
+ udelay(1000);
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
+ MIIM_88E1xxx_PHY_STATUS);
+ }
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK)
+ phydev->link = 1;
+ else
+ phydev->link = 0;
+ }
+
+ if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED;
+
+ switch (speed) {
+ case MIIM_88E1xxx_PHYSTAT_GBIT:
+ phydev->speed = SPEED_1000;
+ break;
+ case MIIM_88E1xxx_PHYSTAT_100:
+ phydev->speed = SPEED_100;
+ break;
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int m88e1011s_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ m88e1xxx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1111S */
+static int m88e1111s_config(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Reset and configure the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x1b);
+ reg = (reg & 0xfff0) | 0xb;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1b, reg);
+ } else {
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1b, 0x1f);
+ }
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0cd2);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1118 */
+static int m88e1118_config(struct phy_device *phydev)
+{
+ /* Reset and configure the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002);
+ /* Delay RGMII TX and RX */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070);
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003);
+ /* Adjust LED control */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e);
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int m88e1118_startup(struct phy_device *phydev)
+{
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
+
+ genphy_update_link(phydev);
+ m88e1xxx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1121R */
+static int m88e1121_config(struct phy_device *phydev)
+{
+ int pg;
+
+ /* Reset and configure the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+ genphy_config_aneg(phydev);
+
+ /* Switch the page to access the led register */
+ pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE,
+ MIIM_88E1121_PHY_LED_PAGE);
+ /* Configure leds */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL,
+ MIIM_88E1121_PHY_LED_DEF);
+ /* Restore the page pointer */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg);
+
+ /* Disable IRQs and de-assert interrupt */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0);
+ phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS);
+
+ return 0;
+}
+
+/* Marvell 88E1145 */
+static int m88e1145_config(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Reset and configure the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ /* Errata E0, E1 */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR,
+ MIIM_88E1xxx_PHY_MDI_X_AUTO);
+
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR);
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ reg |= MIIM_M88E1145_RGMII_RX_DELAY |
+ MIIM_M88E1145_RGMII_TX_DELAY;
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int m88e1145_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL,
+ MIIM_88E1145_PHY_LED_DIRECT);
+ m88e1xxx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1149S */
+static int m88e1149_config(struct phy_device *phydev)
+{
+ /* Reset and configure the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+
+static struct phy_driver M88E1011S_driver = {
+ .name = "Marvell 88E1011S",
+ .uid = 0x1410c60,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1011s_config,
+ .startup = &m88e1011s_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1111S_driver = {
+ .name = "Marvell 88E1111S",
+ .uid = 0x1410cc0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1111s_config,
+ .startup = &m88e1011s_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1118_driver = {
+ .name = "Marvell 88E1118",
+ .uid = 0x1410e10,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1118_config,
+ .startup = &m88e1118_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1121R_driver = {
+ .name = "Marvell 88E1121R",
+ .uid = 0x1410cb0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1121_config,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1145_driver = {
+ .name = "Marvell 88E1145",
+ .uid = 0x1410cd0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1145_config,
+ .startup = &m88e1145_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1149S_driver = {
+ .name = "Marvell 88E1149S",
+ .uid = 0x1410ca0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1149_config,
+ .startup = &m88e1011s_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int marvell_init(void)
+{
+ phy_register(&M88E1149S_driver);
+ phy_register(&M88E1145_driver);
+ phy_register(&M88E1121R_driver);
+ phy_register(&M88E1118_driver);
+ phy_register(&M88E1111S_driver);
+ phy_register(&M88E1011S_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 0000000..b57bcfa
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,40 @@
+/*
+ * Micrel PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+static struct phy_driver KSZ804_driver = {
+ .name = "Micrel KSZ804",
+ .uid = 0x221510,
+ .mask = 0xfffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int micrel_init(void)
+{
+ phy_register(&KSZ804_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/natsemi.c b/drivers/net/phy/natsemi.c
new file mode 100644
index 0000000..2702f19
--- /dev/null
+++ b/drivers/net/phy/natsemi.c
@@ -0,0 +1,96 @@
+/*
+ * National Semiconductor PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+/* DP83865 Link and Auto-Neg Status Register */
+#define MIIM_DP83865_LANR 0x11
+#define MIIM_DP83865_SPD_MASK 0x0018
+#define MIIM_DP83865_SPD_1000 0x0010
+#define MIIM_DP83865_SPD_100 0x0008
+#define MIIM_DP83865_DPX_FULL 0x0002
+
+
+/* NatSemi DP83865 */
+static int dp83865_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int dp83865_parse_status(struct phy_device *phydev)
+{
+ int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_DP83865_LANR);
+
+ switch (mii_reg & MIIM_DP83865_SPD_MASK) {
+
+ case MIIM_DP83865_SPD_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MIIM_DP83865_SPD_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+
+ }
+
+ if (mii_reg & MIIM_DP83865_DPX_FULL)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int dp83865_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ dp83865_parse_status(phydev);
+
+ return 0;
+}
+
+
+static struct phy_driver DP83865_driver = {
+ .name = "NatSemi DP83865",
+ .uid = 0x20005c70,
+ .mask = 0xfffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &dp83865_config,
+ .startup = &dp83865_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int natsemi_init(void)
+{
+ phy_register(&DP83865_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index fc34271..96026ea 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -507,6 +507,37 @@ int phy_init(void)
{
INIT_LIST_HEAD(&phy_drivers);
+#ifdef CONFIG_PHY_ATHEROS
+ atheros_init();
+#endif
+#ifdef CONFIG_PHY_BROADCOM
+ broadcom_init();
+#endif
+#ifdef CONFIG_PHY_DAVICOM
+ davicom_init();
+#endif
+#ifdef CONFIG_PHY_LXT
+ lxt_init();
+#endif
+#ifdef CONFIG_PHY_MARVELL
+ marvell_init();
+#endif
+#ifdef CONFIG_PHY_MICREL
+ micrel_init();
+#endif
+#ifdef CONFIG_PHY_NATSEMI
+ natsemi_init();
+#endif
+#ifdef CONFIG_PHY_REALTEK
+ realtek_init();
+#endif
+#ifdef CONFIG_PHY_TERANETICS
+ teranetics_init();
+#endif
+#ifdef CONFIG_PHY_VITESSE
+ vitesse_init();
+#endif
+
return 0;
}
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
new file mode 100644
index 0000000..e9e5014
--- /dev/null
+++ b/drivers/net/phy/realtek.c
@@ -0,0 +1,130 @@
+/*
+ * RealTek PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000
+
+/* RTL8211B PHY Status Register */
+#define MIIM_RTL8211B_PHY_STATUS 0x11
+#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000
+#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000
+#define MIIM_RTL8211B_PHYSTAT_100 0x4000
+#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000
+#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800
+#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400
+
+
+/* RealTek RTL8211B */
+static int rtl8211b_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int rtl8211b_parse_status(struct phy_device *phydev)
+{
+ unsigned int speed;
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211B_PHY_STATUS);
+
+ if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
+ int i = 0;
+
+ /* in case of timeout ->link is cleared */
+ phydev->link = 1;
+ puts("Waiting for PHY realtime link");
+ while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
+ /* Timeout reached ? */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ phydev->link = 0;
+ break;
+ }
+
+ if ((i++ % 1000) == 0)
+ putc('.');
+ udelay(1000); /* 1 ms */
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211B_PHY_STATUS);
+ }
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK)
+ phydev->link = 1;
+ else
+ phydev->link = 0;
+ }
+
+ if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED);
+
+ switch (speed) {
+ case MIIM_RTL8211B_PHYSTAT_GBIT:
+ phydev->speed = SPEED_1000;
+ break;
+ case MIIM_RTL8211B_PHYSTAT_100:
+ phydev->speed = SPEED_100;
+ break;
+ default:
+ phydev->speed = SPEED_10;
+ }
+
+ return 0;
+}
+
+static int rtl8211b_startup(struct phy_device *phydev)
+{
+ /* Read the Status (2x to make sure link is right) */
+ genphy_update_link(phydev);
+ rtl8211b_parse_status(phydev);
+
+ return 0;
+}
+
+static struct phy_driver RTL8211B_driver = {
+ .name = "RealTek RTL8211B",
+ .uid = 0x1cc910,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &rtl8211b_config,
+ .startup = &rtl8211b_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int realtek_init(void)
+{
+ phy_register(&RTL8211B_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
new file mode 100644
index 0000000..9b92a0d
--- /dev/null
+++ b/drivers/net/phy/teranetics.c
@@ -0,0 +1,54 @@
+/*
+ * Teranetics PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+int tn2020_config(struct phy_device *phydev)
+{
+ if (phydev->port == PORT_FIBRE) {
+ phy_write(phydev, 30, 93, 2);
+ phy_write(phydev, 7, 0, 0x3200);
+ }
+
+ phydev->mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+ MDIO_DEVS_PHYXS | MDIO_DEVS_AN |
+ MDIO_DEVS_VEND1 | MDIO_DEVS_VEND2);
+
+ return 0;
+}
+
+struct phy_driver tn2020_driver = {
+ .name = "Teranetics TN2020",
+ .uid = 0x00a19410,
+ .mask = 0xfffffff0,
+ .features = PHY_10G_FEATURES,
+ .config = &tn2020_config,
+ .startup = &gen10g_startup,
+ .shutdown = &gen10g_shutdown,
+};
+
+int teranetics_init(void)
+{
+ phy_register(&tn2020_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
new file mode 100644
index 0000000..b2376ef
--- /dev/null
+++ b/drivers/net/phy/vitesse.c
@@ -0,0 +1,242 @@
+/*
+ * Vitesse PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <miiphy.h>
+
+/* Cicada Auxiliary Control/Status Register */
+#define MIIM_CIS82xx_AUX_CONSTAT 0x1c
+#define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004
+#define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018
+#define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010
+#define MIIM_CIS82xx_AUXCONSTAT_100 0x0008
+
+/* Cicada Extended Control Register 1 */
+#define MIIM_CIS82xx_EXT_CON1 0x17
+#define MIIM_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada 8204 Extended PHY Control Register 1 */
+#define MIIM_CIS8204_EPHY_CON 0x17
+#define MIIM_CIS8204_EPHYCON_INIT 0x0006
+#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
+
+/* Cicada 8204 Serial LED Control Register */
+#define MIIM_CIS8204_SLED_CON 0x1b
+#define MIIM_CIS8204_SLEDCON_INIT 0x1115
+
+/* Vitesse VSC8601 Extended PHY Control Register 1 */
+#define MIIM_VSC8601_EPHY_CON 0x17
+#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
+#define MIIM_VSC8601_SKEW_CTRL 0x1c
+
+#define PHY_EXT_PAGE_ACCESS 0x1f
+
+/* CIS8201 */
+static int vitesse_config(struct phy_device *phydev)
+{
+ /* Override PHY config settings */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
+ MIIM_CIS82xx_AUXCONSTAT_INIT);
+ /* Set up the interface mode */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
+ MIIM_CIS8201_EXTCON1_INIT);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int vitesse_parse_status(struct phy_device *phydev)
+{
+ int speed;
+ int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
+
+ if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
+ switch (speed) {
+ case MIIM_CIS82xx_AUXCONSTAT_GBIT:
+ phydev->speed = SPEED_1000;
+ break;
+ case MIIM_CIS82xx_AUXCONSTAT_100:
+ phydev->speed = SPEED_100;
+ break;
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int vitesse_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ vitesse_parse_status(phydev);
+
+ return 0;
+}
+
+static int cis8204_config(struct phy_device *phydev)
+{
+ /* Override PHY config settings */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
+ MIIM_CIS82xx_AUXCONSTAT_INIT);
+
+ genphy_config_aneg(phydev);
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
+ MIIM_CIS8204_EPHYCON_INIT |
+ MIIM_CIS8204_EPHYCON_RGMII);
+ else
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
+ MIIM_CIS8204_EPHYCON_INIT);
+
+ return 0;
+}
+
+/* Vitesse VSC8601 */
+int vsc8601_config(struct phy_device *phydev)
+{
+ /* Configure some basic stuff */
+#ifdef CONFIG_SYS_VSC8601_SKEWFIX
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON,
+ MIIM_VSC8601_EPHY_CON_INIT_SKEW);
+#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1);
+#define VSC8101_SKEW \
+ ((CONFIG_SYS_VSC8601_SKEW_TX << 14) \
+ | (CONFIG_SYS_VSC8601_SKEW_RX << 12))
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL,
+ VSC8101_SKEW);
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+#endif
+#endif
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static struct phy_driver VSC8211_driver = {
+ .name = "Vitesse VSC8211",
+ .uid = 0xfc4b0,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vitesse_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8221_driver = {
+ .name = "Vitesse VSC8221",
+ .uid = 0xfc550,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8244_driver = {
+ .name = "Vitesse VSC8244",
+ .uid = 0xfc6c0,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8234_driver = {
+ .name = "Vitesse VSC8234",
+ .uid = 0xfc620,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8601_driver = {
+ .name = "Vitesse VSC8601",
+ .uid = 0x70420,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vsc8601_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8641_driver = {
+ .name = "Vitesse VSC8641",
+ .uid = 0x70430,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+/* Vitesse bought Cicada, so we'll put these here */
+static struct phy_driver cis8201_driver = {
+ .name = "CIS8201",
+ .uid = 0xfc410,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vitesse_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver cis8204_driver = {
+ .name = "Cicada Cis8204",
+ .uid = 0xfc440,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &cis8204_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int vitesse_init(void)
+{
+ phy_register(&VSC8641_driver);
+ phy_register(&VSC8601_driver);
+ phy_register(&VSC8234_driver);
+ phy_register(&VSC8244_driver);
+ phy_register(&VSC8211_driver);
+ phy_register(&VSC8221_driver);
+ phy_register(&cis8201_driver);
+ phy_register(&cis8204_driver);
+
+ return 0;
+}
diff --git a/include/phy.h b/include/phy.h
index 1053a9d..4620089 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -486,4 +486,15 @@ int genphy_shutdown(struct phy_device *phydev);
int gen10g_config(struct phy_device *phydev);
int gen10g_startup(struct phy_device *phydev);
int gen10g_shutdown(struct phy_device *phydev);
+
+int atheros_init(void);
+int broadcom_init(void);
+int davicom_init(void);
+int lxt_init(void);
+int marvell_init(void);
+int micrel_init(void);
+int natsemi_init(void);
+int realtek_init(void);
+int teranetics_init(void);
+int vitesse_init(void);
#endif
diff --git a/include/phylib_all_drivers.h b/include/phylib_all_drivers.h
new file mode 100644
index 0000000..a73b3d7
--- /dev/null
+++ b/include/phylib_all_drivers.h
@@ -0,0 +1,25 @@
+/*
+ * Enable all PHYs
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#ifndef _CONFIG_PHYLIB_ALL_H
+#define _CONFIG_PHYLIB_ALL_H
+
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_MARVELL
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_BROADCOM
+#define CONFIG_PHY_DAVICOM
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHY_NATSEMI
+#define CONFIG_PHY_TERANETICS
+#define CONFIG_PHY_LXT
+
+#endif
--
1.6.5.2.g6ff9a
More information about the U-Boot
mailing list