[U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor

[Jason Kridner]

Remove __attribute__ ((packed)) to prevent byte access to soc
registers in some gcc versions.

Having patches to enable ehci for the BeagleBoard lying around for
several month, this one was the show-stopper.

Credits have to go to Laine Walker-Avina <lwalkera at ieee.org> for
finding the problem.

Signed-off-by: Jason Kridner <jkridner at beagleboard.org>
Cc: Alexander Holler <holler at ahsoftware.de>
Cc: Sandeep Paulraj <s-paulraj at ti.com>
---
Changes for v2:
* Original and v2 were provided by Alexander Holler.
* v1 was http://patchwork.ozlabs.org/patch/89358/
* v2 was http://patchwork.ozlabs.org/patch/89362/

Changes for v3:
* Switched to align(4), rather than remove the attribute, per suggestion
  from Alexander.
---
 drivers/usb/host/ehci.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 945ab64..3d0ad0c 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -55,7 +55,7 @@ struct ehci_hccr {
 #define HCS_N_PORTS(p)		(((p) >> 0) & 0xf)
 	uint32_t cr_hccparams;
 	uint8_t cr_hcsp_portrt[8];
-} __attribute__ ((packed));
+} __attribute__ ((packed, aligned(4)));
 
 struct ehci_hcor {
 	uint32_t or_usbcmd;
@@ -85,7 +85,7 @@ struct ehci_hcor {
 #define FLAG_CF		(1 << 0)	/* true:  we'll support "high speed" */
 	uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
 	uint32_t or_systune;
-} __attribute__ ((packed));
+} __attribute__ ((packed, aligned(4)));
 
 #define USBMODE		0x68		/* USB Device mode */
 #define USBMODE_SDIS	(1 << 3)	/* Stream disable */
-- 
1.5.6.4