[U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100
Prafulla Wadaskar
prafulla at marvell.com
Wed Apr 13 16:26:41 CEST 2011
> -----Original Message-----
> From: Lei Wen [mailto:adrian.wenl at gmail.com]
> Sent: Wednesday, April 13, 2011 7:44 PM
> To: Prafulla Wadaskar
> Cc: Lei Wen; Heiko Schocher; Wolfgang Denk; u-boot at lists.denx.de; Marek
> Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu Tang
> Subject: Re: [PATCH V8 0/6] add i2c support to pantheon and aramada100
>
> Hi Prafulla,
>
> On Wed, Apr 13, 2011 at 10:01 PM, Prafulla Wadaskar
> <prafulla at marvell.com> wrote:
> >
> >
> >> -----Original Message-----
> >> From: Lei Wen [mailto:leiwen at marvell.com]
> >> Sent: Tuesday, April 05, 2011 1:31 PM
> >> To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u-
> >> boot at lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik;
> Yu
> >> Tang; adrian.wenl at gmail.com
> >> Subject: [PATCH V8 0/6] add i2c support to pantheon and aramada100
> >>
> >> V2:
> >> rename the previous pxa_i2c to mvi2c, since this driver would be
> shared
> >> by many other Marvell platforms.
> >>
> >> V3:
> >> Clean the code sytle issue
> >>
> >> V4:
> >> add and* and or* to make set bit operation generic
> >> Also make i2c definition included in the ifdef
> >>
> >> V5:
> >> Fix code style issue of the first patch
> >>
> >> V6:
> >> Seperate the and* and or* patch out of the patch set
> >> Move CONFIG_CMD_I2C define place
> >>
> >> V7:
> >> Fix comments style
> >> Make global change from PXA to MV
> >> Move i2c config setting to <arch/config>
> >>
> >> V8:
> >> Seperate timeout fix patch out
> >>
> >> Lei Wen (6):
> >> pxa: move i2c driver to the common place
> >> mv_i2c: fix timeout value to be consistent with comments
> >> mv_i2c: use structure to replace the direclty define
> >> I2C: add i2c support for Pantheon platform
> >> I2C: mv_i2c: add multi bus support
> >> I2C: add i2c support for Armada100 platform
> >>
> >> arch/arm/cpu/arm926ejs/armada100/cpu.c | 16 +
> >> arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 +
> >> arch/arm/cpu/pxa/Makefile | 1 -
> >> arch/arm/cpu/pxa/cpu.c | 10 +
> >> arch/arm/cpu/pxa/i2c.c | 469 ----------------
> ---
> >> ------
> >> arch/arm/include/asm/arch-armada100/config.h | 12 +
> >> arch/arm/include/asm/arch-armada100/mfp.h | 40 ++-
> >> arch/arm/include/asm/arch-pantheon/config.h | 10 +
> >> arch/arm/include/asm/arch-pantheon/cpu.h | 4 +-
> >> arch/arm/include/asm/arch-pantheon/mfp.h | 6 +-
> >> arch/arm/include/asm/arch-pxa/pxa-regs.h | 56 ---
> >> board/Marvell/aspenite/aspenite.c | 5 +
> >> board/Marvell/dkb/dkb.c | 4 +
> >> board/innokom/innokom.c | 9 +-
> >> drivers/i2c/Makefile | 1 +
> >> drivers/i2c/mv_i2c.c | 481
> >> ++++++++++++++++++++++++++
> >> drivers/i2c/mv_i2c.h | 83 +++++
> >> include/configs/aspenite.h | 1 +
> >> include/configs/dkb.h | 2 +
> >> include/configs/innokom.h | 2 +
> >> include/configs/xm250.h | 2 +
> >> 21 files changed, 671 insertions(+), 555 deletions(-)
> >> delete mode 100644 arch/arm/cpu/pxa/i2c.c
> >> create mode 100644 drivers/i2c/mv_i2c.c
> >> create mode 100644 drivers/i2c/mv_i2c.h
> >
> > Dear Lei
> > I have trying to apply this patch series to u-boot-marvell.git master
> branch.
> > Since I have rebased this branch to latest u-boot-arm.git master.
> >
> > This patch series cannot be cleanly applied.
> >
> > Can you pls provide new one in sync with latest pull from u-boot-
> marvell.git master branch?
> >
>
> I just apply those patch on master branch without any warning.
> Are you apply the V8 series?
Yes, I am using V8 patches.
Have you done git pull before that?
What is your latest git log? (before applying patches)
Regards..
Prafulla . .
More information about the U-Boot
mailing list