[U-Boot] [PATCH 08/30] powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support
Valentin Longchamp
valentin.longchamp at keymile.com
Fri Apr 8 16:23:58 CEST 2011
From: Holger Brunck <holger.brunck at keymile.com>
This patch rename mgcoge2ne board support to mgcoge3ne.
The board is similar to mgcoge. The difference is that
a NUMONYX flash is used and a larger SDRAM (256MB).
Also introduce CONFIG_KM_82XX to collect ppc82xx common
settings.
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
Acked-by: Heiko Schocher <hs at denx.de>
cc: Wolfgang Denk <wd at denx.de>
cc: Detlev Zundel <dzu at denx.de>
cc: Valentin Longchamp <valentin.longchamp at keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
---
MAINTAINERS | 2 +-
board/keymile/common/common.c | 6 +-
board/keymile/common/common.h | 1 +
board/keymile/km82xx/km82xx.c | 27 ++++++++++++
boards.cfg | 2 +-
include/configs/mgcoge.h | 1 +
include/configs/{mgcoge2ne.h => mgcoge3ne.h} | 58 +++++++++++++++-----------
7 files changed, 67 insertions(+), 30 deletions(-)
rename include/configs/{mgcoge2ne.h => mgcoge3ne.h} (65%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9586bcb..37e03c9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -429,7 +429,7 @@ Heiko Schocher <hs at denx.de>
kmeter1 MPC8360
kmsupx5 MPC8321
mgcoge MPC8247
- mgcoge2ne MPC8247
+ mgcoge3ne MPC8247
mgcoge2un ARM926EJS (Kirkwood SoC)
mucmc52 MPC5200
muas3001 MPC8270
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index b113c0a..3a7980d 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -22,7 +22,7 @@
*/
#include <common.h>
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM82XX)
#include <mpc8260.h>
#endif
#include <ioports.h>
@@ -398,10 +398,10 @@ int ivm_read_eeprom(void)
#define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */
#define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000))
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM_82XX)
#define SDA_MASK 0x00010000
#define SCL_MASK 0x00020000
-static void set_pin(int state, unsigned long mask)
+void set_pin(int state, unsigned long mask)
{
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index 6ce992a..cee24d4 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -124,6 +124,7 @@ struct bfticu_iomap {
int ethernet_present(void);
int ivm_read_eeprom(void);
+void set_pin(int state, unsigned long mask);
int set_km_env(void);
int fdt_set_node_and_value(void *blob,
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index 3db3c7b..5dc7ffa 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -287,6 +287,8 @@ int checkboard(void)
{
#if defined(CONFIG_MGCOGE)
puts("Board: Keymile mgcoge");
+#elif defined(CONFIG_MGCOGE3NE)
+ puts("Board: Keymile mgcoge3ne");
#else
puts("Board: Keymile mgcoge2ne");
#endif
@@ -296,6 +298,28 @@ int checkboard(void)
return 0;
}
+#ifdef CONFIG_MGCOGE3NE
+/*
+ * For mgcoge3ne boards, the mgcoge3un control is controlled from
+ * a GPIO line on the PPC CPU. If bobcatreset is set the line
+ * will toggle once what forces the mgocge3un part to restart
+ * immediately.
+ */
+void handle_mgcoge3un_reset(void)
+{
+ char *bobcatreset = getenv("bobcatreset");
+ if (bobcatreset) {
+ if (strcmp(bobcatreset, "true") == 0) {
+ puts("Forcing bobcat reset\n");
+ set_pin(0, 0x00000004); /* clear PD29 to reset arm */
+ udelay(1000);
+ set_pin(1, 0x00000004);
+ } else
+ set_pin(1, 0x00000004); /* set PD29 to not reset arm */
+ }
+}
+#endif
+
/*
* Early board initalization.
*/
@@ -311,6 +335,9 @@ int board_early_init_r(void)
out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
H_OPORTS_FCC1_PW_DWN));
+#ifdef CONFIG_MGCOGE3NE
+ handle_mgcoge3un_reset();
+#endif
return 0;
}
diff --git a/boards.cfg b/boards.cfg
index 4c52770..f6105be 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -423,7 +423,7 @@ PQ2FADS-ZU_66MHz_lowboot powerpc mpc8260 mpc8260ads freesca
PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz
mgcoge powerpc mpc8260 km82xx keymile
-mgcoge2ne powerpc mpc8260 km82xx keymile
+mgcoge3ne powerpc mpc8260 km82xx keymile
SCM powerpc mpc8260 - siemens
TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz
TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index aed1526..93a6f4a 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -32,6 +32,7 @@
#define CONFIG_MPC8247
#define CONFIG_MGCOGE
#define CONFIG_HOSTNAME mgcoge
+#define CONFIG_KM_82XX
#define CONFIG_SYS_TEXT_BASE 0xFE000000
diff --git a/include/configs/mgcoge2ne.h b/include/configs/mgcoge3ne.h
similarity index 65%
rename from include/configs/mgcoge2ne.h
rename to include/configs/mgcoge3ne.h
index 2b09b42..3df7ef1 100644
--- a/include/configs/mgcoge2ne.h
+++ b/include/configs/mgcoge3ne.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007-2010
+ * (C) Copyright 2011
* Heiko Schocher, DENX Software Engineering, hs at denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -21,16 +21,18 @@
* MA 02111-1307 USA
*/
-#ifndef __MGCOGE2NE
-#define __MGCOGE2NE
+#ifndef __MGCOGE3NE
+#define __MGCOGE3NE
/*
* High Level Configuration Options
* (easy to change)
*/
+
#define CONFIG_MPC8247
-#define CONFIG_MGCOGE
-#define CONFIG_HOSTNAME mgcoge2ne
+#define CONFIG_MGCOGE3NE
+#define CONFIG_HOSTNAME mgcoge3ne
+#define CONFIG_KM_82XX
#define CONFIG_SYS_TEXT_BASE 0xFE000000
@@ -43,15 +45,20 @@
#define CONFIG_SYS_FLASH_SIZE 32
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /*
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /*
* max num of sects on one
* chip
*/
#define CONFIG_SYS_FLASH_BASE_1 0x50000000
+#ifdef CONFIG_COGE3NE_P1X
#define CONFIG_SYS_FLASH_SIZE_1 64
-#define CONFIG_SYS_FLASH_SIZE_2 0
+#else
+#define CONFIG_SYS_FLASH_SIZE_1 128
+#endif
+
+#define CONFIG_SYS_FLASH_SIZE_2 0 /* dummy value to calc SYS_OR5 */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
CONFIG_SYS_FLASH_BASE_1 }
@@ -60,28 +67,29 @@
/*
* Bank 1 - 60x bus SDRAM
- * mgcoge2ne has 128M RAM
+ * mgcoge3ne has 256M.
*/
-#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
+#define SDRAM_MAX_SIZE 0x10000000 /* max. 256 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512 << 20) /* less than 512 MB */
#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \
- ORxS_SDAM_MSK) |\
- ORxS_BPD_8 |\
- ORxS_ROWST_PBI0_A7 |\
- ORxS_NUMR_13)
+ ORxS_SDAM_MSK) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI1_A4 |\
+ ORxS_NUMR_13)
-#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\
- PSDMR_BSMA_A14_A16 |\
- PSDMR_SDA10_PBI0_A9 |\
- PSDMR_RFRC_5_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_1C |\
- PSDMR_CL_2)
+#define CONFIG_SYS_PSDMR (PSDMR_PBI |\
+ PSDMR_SDAM_A17_IS_A5 |\
+ PSDMR_BSMA_A13_A15 |\
+ PSDMR_SDA10_PBI1_A6 |\
+ PSDMR_RFRC_5_CLK |\
+ PSDMR_PRETOACT_2W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_LDOTOPRE_1C |\
+ PSDMR_WRC_2C |\
+ PSDMR_CL_2)
/* include further common stuff for all keymile 82xx boards */
#include "km82xx-common.h"
-#endif /* __MGCOGE2NE */
+#endif /* __MGCOGE3NE */
--
1.7.0.5
More information about the U-Boot
mailing list