[U-Boot] [PATCH v4 2/5] Add Ethernet hardware MAC address framework to usbnet

[Remy Bohmer]

Hi,

2011/4/14 Simon Glass <sjg at chromium.org>:
> Built-in Ethernet adapters support setting the mac address by means of a
> ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).
>
> This adds similar support to the USB network side, using the names
> usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
> a USB device taking the MAC address of a built-in device or vice versa.
>
> TEST=build, test on harmony, with setenv usbethaddr c0:c1:c0:13:0b:b8, bootp, tftp ...
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>  board/davinci/common/misc.c |    2 +-
>  drivers/net/designware.c    |    2 +-
>  drivers/usb/eth/usb_ether.c |    9 ++++-
>  include/net.h               |   25 ++++++++++++++++-
>  net/eth.c                   |   65 ++++++++++++++++++++++++++----------------

3 subsystems within 1 single patch (net + usb + davinci-boards). How
are we gonna deal with it?
Since the remainder of the series is USB tree related, I would suggest
to include it in the u-boot-usb tree, but then I need the Ack of Ben
and Sandeep.

Kind regards,

Remy