[U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100

[Prafulla Wadaskar]

> -----Original Message-----
> From: Prafulla Wadaskar
> Sent: Wednesday, April 13, 2011 7:57 PM
> To: 'Lei Wen'
> Cc: Lei Wen; Heiko Schocher; Wolfgang Denk; u-boot at lists.denx.de; Marek
> Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu Tang
> Subject: RE: [PATCH V8 0/6] add i2c support to pantheon and aramada100
> 
> 
> 
> > -----Original Message-----
> > From: Lei Wen [mailto:adrian.wenl at gmail.com]
> > Sent: Wednesday, April 13, 2011 7:44 PM
> > To: Prafulla Wadaskar
> > Cc: Lei Wen; Heiko Schocher; Wolfgang Denk; u-boot at lists.denx.de;
> Marek
> > Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu Tang
> > Subject: Re: [PATCH V8 0/6] add i2c support to pantheon and aramada100
> >
> > Hi Prafulla,
> >
> > On Wed, Apr 13, 2011 at 10:01 PM, Prafulla Wadaskar
> > <prafulla at marvell.com> wrote:
> > >
> > >
> > >> -----Original Message-----
> > >> From: Lei Wen [mailto:leiwen at marvell.com]
> > >> Sent: Tuesday, April 05, 2011 1:31 PM
> > >> To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u-
> > >> boot at lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan
> Sarnaik;
> > Yu
> > >> Tang; adrian.wenl at gmail.com
> > >> Subject: [PATCH V8 0/6] add i2c support to pantheon and aramada100
> > >>
> > >> V2:
> > >> rename the previous pxa_i2c to mvi2c, since this driver would be
> > shared
> > >> by many other Marvell platforms.
> > >>
> > >> V3:
> > >> Clean the code sytle issue
> > >>
> > >> V4:
> > >> add and* and or* to make set bit operation generic
> > >> Also make i2c definition included in the ifdef
> > >>
> > >> V5:
> > >> Fix code style issue of the first patch
> > >>
> > >> V6:
> > >> Seperate the and* and or* patch out of the patch set
> > >> Move CONFIG_CMD_I2C define place
> > >>
> > >> V7:
> > >> Fix comments style
> > >> Make global change from PXA to MV
> > >> Move i2c config setting to <arch/config>
> > >>
> > >> V8:
> > >> Seperate timeout fix patch out
> > >>
> > >> Lei Wen (6):
> > >>   pxa: move i2c driver to the common place
> > >>   mv_i2c: fix timeout value to be consistent with comments
> > >>   mv_i2c: use structure to replace the direclty define
> > >>   I2C: add i2c support for Pantheon platform
> > >>   I2C: mv_i2c: add multi bus support
> > >>   I2C: add i2c support for Armada100 platform
> > >>
> > >>  arch/arm/cpu/arm926ejs/armada100/cpu.c       |   16 +
> > >>  arch/arm/cpu/arm926ejs/pantheon/cpu.c        |   12 +
> > >>  arch/arm/cpu/pxa/Makefile                    |    1 -
> > >>  arch/arm/cpu/pxa/cpu.c                       |   10 +
> > >>  arch/arm/cpu/pxa/i2c.c                       |  469 --------------
> --
> > ---
> > >> ------
> > >>  arch/arm/include/asm/arch-armada100/config.h |   12 +
> > >>  arch/arm/include/asm/arch-armada100/mfp.h    |   40 ++-
> > >>  arch/arm/include/asm/arch-pantheon/config.h  |   10 +
> > >>  arch/arm/include/asm/arch-pantheon/cpu.h     |    4 +-
> > >>  arch/arm/include/asm/arch-pantheon/mfp.h     |    6 +-
> > >>  arch/arm/include/asm/arch-pxa/pxa-regs.h     |   56 ---
> > >>  board/Marvell/aspenite/aspenite.c            |    5 +
> > >>  board/Marvell/dkb/dkb.c                      |    4 +
> > >>  board/innokom/innokom.c                      |    9 +-
> > >>  drivers/i2c/Makefile                         |    1 +
> > >>  drivers/i2c/mv_i2c.c                         |  481
> > >> ++++++++++++++++++++++++++
> > >>  drivers/i2c/mv_i2c.h                         |   83 +++++
> > >>  include/configs/aspenite.h                   |    1 +
> > >>  include/configs/dkb.h                        |    2 +
> > >>  include/configs/innokom.h                    |    2 +
> > >>  include/configs/xm250.h                      |    2 +
> > >>  21 files changed, 671 insertions(+), 555 deletions(-)
> > >>  delete mode 100644 arch/arm/cpu/pxa/i2c.c
> > >>  create mode 100644 drivers/i2c/mv_i2c.c
> > >>  create mode 100644 drivers/i2c/mv_i2c.h
> > >
> > > Dear Lei
> > > I have trying to apply this patch series to u-boot-marvell.git
> master
> > branch.
> > > Since I have rebased this branch to latest u-boot-arm.git master.
> > >
> > > This patch series cannot be cleanly applied.
> > >
> > > Can you pls provide new one in sync with latest pull from u-boot-
> > marvell.git master branch?
> > >
> >
> > I just apply those patch on master branch without any warning.
> > Are you apply the V8 series?
> 
> Yes, I am using V8 patches.
> Have you done git pull before that?
> What is your latest git log? (before applying patches)

Sorry for the noise Lei.
I could apply them cleanly.

Regards..
Prafulla . .