[U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality
Albert ARIBAUD
albert.u.boot at aribaud.net
Wed Apr 13 22:31:36 CEST 2011
Tom,
Le 13/04/2011 22:26, Tom Warren a écrit :
> Albert,
>
> On Wed, Apr 13, 2011 at 1:14 PM, Albert ARIBAUD
> <albert.u.boot at aribaud.net> wrote:
>> Hi Tom,
>>
>> Le 13/04/2011 22:07, Tom Warren a écrit :
>>>
>>> Signed-off-by: Tom Warren<twarren at nvidia.com>
>>> ---
>>> arch/arm/include/asm/arch-tegra2/gpio.h | 59
>>> +++++++++++++++++++++++++++++
>>> arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
>>> 2 files changed, 60 insertions(+), 0 deletions(-)
>>> create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h
>>>
>>> diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h
>>> b/arch/arm/include/asm/arch-tegra2/gpio.h
>>> new file mode 100644
>>> index 0000000..0fb8f0d
>>> --- /dev/null
>>> +++ b/arch/arm/include/asm/arch-tegra2/gpio.h
>>> @@ -0,0 +1,59 @@
>>> +/*
>>> + * Copyright (c) 2011, Google Inc. All rights reserved.
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>>> + * MA 02111-1307 USA
>>> + */
>>> +
>>> +#ifndef _TEGRA2_GPIO_H_
>>> +#define _TEGRA2_GPIO_H_
>>> +
>>> +/*
>>> + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4
>>> ports,
>>> + * each with 8 GPIOs.
>>> + */
>>> +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */
>>> +#define TEGRA_GPIO_BANKS 8 /* The number of banks */
>>> +
>>> +/* GPIO Controller registers for a single bank */
>>> +struct gpio_ctlr_bank {
>>> + uint gpio_config[TEGRA_GPIO_PORTS];
>>> + uint gpio_dir_out[TEGRA_GPIO_PORTS];
>>> + uint gpio_out[TEGRA_GPIO_PORTS];
>>> + uint gpio_in[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_status[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_enable[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_level[TEGRA_GPIO_PORTS];
>>> + uint gpio_int_clear[TEGRA_GPIO_PORTS];
>>> +};
>>> +
>>> +struct gpio_ctlr {
>>> + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
>>> +};
>>> +
>>> +#define GPIO_BANK(x) ((x)>> 5)
>>> +#define GPIO_PORT(x) (((x)>> 3)& 0x3)
>>> +#define GPIO_BIT(x) ((x)& 0x7)
>>> +
>>> +/*
>>> + * GPIO_PI3 = Port I = 8, bit = 3.
>>> + * Seaboard: used for UART/SPI selection
>>> + * Harmony: not used
>>> + */
>>> +#define GPIO_PI3 ((8<< 3) | 3)
>>> +
>>> +#endif /* TEGRA2_GPIO_H_ */
>>> diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> b/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> index 7b0f5cc..742a75a 100644
>>> --- a/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h
>>> @@ -30,6 +30,7 @@
>>> #define NV_PA_TMRUS_BASE 0x60005010
>>> #define NV_PA_CLK_RST_BASE 0x60006000
>>> #define NV_PA_FLOW_BASE 0x60007000
>>> +#define NV_PA_GPIO_BASE 0x6000D000
>>> #define NV_PA_EVP_BASE 0x6000F000
>>> #define NV_PA_APB_MISC_BASE 0x70000000
>>> #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000)
>>
>> These are header files only, and they do not even contain function-like
>> macros, so where is the functionality exactly?
> In the next patch (3/3) - the macros are used in seaboard.c to drive
> the UART_DISABLE GPIO low to enable the UART in U-Boot POST.
Could you just rename the patch "Add basic GPIO definitions" then?
Amicalement,
--
Albert.
More information about the U-Boot
mailing list