[U-Boot] [PATCH v4] ARM: mx31: Print the silicon version
Fabio Estevam
festevam at gmail.com
Tue Apr 12 03:21:37 CEST 2011
Use the same method of the Linux kernel to print the MX31 silicon version on
boot.
Tested on a MX31PDK with a 2.0 silicon, where it shows:
CPU: Freescale i.MX31 rev 2.0 at 531 MHz
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v3:
- Keep consistency with other i.MX processors and print the silicon version
in the same line as the CPU name
- Remove unneeded blank line in imx_soc_revision.h
Changes since v2:
- Use macro instead of defines for IMX_CHIP_REVISION
Changes since v1:
- rename the CPU detect function name to get_cpu_rev
- Use struct to access iim register
arch/arm/cpu/arm1136/mx31/generic.c | 19 ++++++++++++++++-
arch/arm/include/asm/arch-mx31/imx-regs.h | 20 +++++++++++++++++++
arch/arm/include/asm/imx_soc_revision.h | 30 +++++++++++++++++++++++++++++
3 files changed, 67 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/include/asm/imx_soc_revision.h
diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index fa07fec..0f20602 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/io.h>
+#include <asm/imx_soc_revision.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
@@ -106,11 +107,25 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
}
+char *get_cpu_rev(void)
+{
+ u32 i, srev;
+
+ /* read SREV register from IIM module */
+ struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR;
+ srev = readl(&iim->iim_srev);
+
+ for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+ if (srev == mx31_cpu_type[i].srev)
+ return mx31_cpu_type[i].v;
+ return "unknown";
+}
+
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo (void)
{
- printf("CPU: Freescale i.MX31 at %d MHz\n",
- mx31_get_mcu_main_clk() / 1000000);
+ printf("CPU: Freescale i.MX31 rev %s at %d MHz\n",
+ get_cpu_rev(), mx31_get_mcu_main_clk() / 1000000);
return 0;
}
#endif
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 37337f2..6401a37 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -84,6 +84,24 @@ struct wdog_regs {
u16 wrsr; /* Reset Status */
};
+/* IIM Control Registers */
+struct iim_regs {
+ u32 iim_stat;
+ u32 iim_statm;
+ u32 iim_err;
+ u32 iim_emask;
+ u32 iim_fctl;
+ u32 iim_ua;
+ u32 iim_la;
+ u32 iim_sdat;
+ u32 iim_prev;
+ u32 iim_srev;
+ u32 iim_prog_p;
+ u32 iim_scs0;
+ u32 iim_scs1;
+ u32 iim_scs2;
+ u32 iim_scs3;
+};
#define IOMUX_PADNUM_MASK 0x1ff
#define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK)
@@ -480,6 +498,8 @@ enum iomux_pins {
#define CCMR_FPM (1 << 1)
#define CCMR_CKIH (2 << 1)
+#define MX31_IIM_BASE_ADDR 0x5001C000
+
#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23)
#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16)
#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11)
diff --git a/arch/arm/include/asm/imx_soc_revision.h b/arch/arm/include/asm/imx_soc_revision.h
new file mode 100644
index 0000000..14bac81
--- /dev/null
+++ b/arch/arm/include/asm/imx_soc_revision.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * Fabio Estevam <fabio.estevam at freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ */
+
+#define IMX_CHIP_REVISION(maj, min) ((maj) * 16 + (min))
+
+struct mx3_cpu_type {
+ u8 srev;
+ const char *name;
+ const char *v;
+ unsigned int rev;
+};
+
+struct mx3_cpu_type mx31_cpu_type[] = {
+ { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION(1, 0) },
+ { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION(1, 1) },
+ { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION(1, 1) },
+ { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION(1, 1) },
+ { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION(1, 1) },
+ { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION(1, 2) },
+ { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION(1, 2) },
+ { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION(2, 0) },
+ { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION(2, 0) },
+};
--
1.6.0.4
More information about the U-Boot
mailing list