[U-Boot] [PATCH v6 4/7] jz4740 nand driver

[Xiangfu Liu]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 03/23/2011 12:10 AM, Scott Wood wrote:
>> I have tried to move those 'usb_boot' to board files. the only problem is 
>> > I have to run this 'usb_boot' very early. after CPU load the real u-boot to memory
>> > the usb_boot will not working. I will try to found more info about this. 
>> > then explain more in next email.
> OK, so you need to run it during the SPL phase -- but there should be
> some board/cpu-specific file for the SPL (if not, create one).
> 
> Current examples of this
> include nand_spl/board/freescale/p1_p2_rdb/nand_boot.c and
> arch/powerpc/cpu/mpc83xx/nand_init.c.
> 
Hi Scott Wood

thanks for the info. for speed up I think I will remove the usbboot and nandboot SPL in those patches
series. 

I am NOT SOTP working on that. I will try to implement them in next series patches
and will include the mmc/lcd/nandSPL source code in next serial patches.

thanks again.

- -- 
Best Regards
Xiangfu Liu
http://www.openmobilefree.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAk222lMACgkQRRAEFRxkgLSMaACgrOofX/zJNpNp1e1WvhTVyAl3
64kAoIvIx38HasmCmqer2FXzoKPKlagH
=Qmft
-----END PGP SIGNATURE-----