[U-Boot] [PATCH 18/30] i2c: add i2c deblock sequence before and after every mux config

[Heiko Schocher]

Hello Valentin,

Valentin Longchamp wrote:
> From: Stefan Bigler <stefan.bigler at keymile.com>
> 
> To make sure that the mux can be configured a deblocking sequence
> is done before the mux configuration. After the mux switch the new leaf
> of, the i2c tree must be again deblocked.
> 
> Signed-off-by: Stefan Bigler <stefan.bigler at keymile.com>
> Acked-by: Heiko Schocher <hs at denx.de>
> cc: Wolfgang Denk <wd at denx.de>
> cc: Detlev Zundel <dzu at denx.de>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> cc: Valentin Longchamp <valentin.longchamp at keymile.com>
> cc: Holger Brunck <holger.brunck at keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> ---
>  common/cmd_i2c.c |   12 ++++++++++++
>  include/i2c.h    |    2 --
>  2 files changed, 12 insertions(+), 2 deletions(-)

Thanks! Applied to u-boot-i2c. As this patch is independent, it
must not be in a patchseries, so I applied it directly to the
i2c-tree.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany